User's Manual

CONTROLS AND DISPLAY
16
Status Display - These two characters indicate the following status
information:
- This symbol in the left position indicates that the displayed
channel is in the scan list (scanned normally).
- A “P” in the left position indicates that the selected conventional
channel is a priority channel.
- This rotating clock-like symbol in the right position indicates that
scanning is enabled.
- Indicates that the displayed channel (or talk group) is programmed
for telephone calls.
- Indicates that voice encryption is enabled.
MON - Indicates that the monitoring is enabled by the Monitor option
switch (conventional operation only). This switch unsquelches the receiver
so that all messages are heard on the channel. Refer to page 29 for more
information.
- The lines above the zone and channel displays indicate which
display is changed if the Select switch is turned. To switch between
displays, press the Select switch (see page 18).
- When this triangle is displayed, the scan list edit mode is indicated
(see page 25).