User's Manual

CONTROLS AND DISPLAY
15
Rear Panel Jacks
DC Power Jack - Connection point for the nominal 12-volt, negative
ground power source (see Figure 2).
Antenna Jack - Type N jack for connecting the antenna.
Accessory Jack - Connection point for optional accessories such as an
external speaker (4-ohm, 12-watt) and ignition sense line.
Remote Control Unit Jack - Connection point for a remote control unit if
used. This cable is optional with front-mount models.
Display
Alphanumeric Display - This 10-character area of the display indicates
the alias (unique identification) for the selected channel. Depending on the
current mode, it may also indicate such things as the channel frequency,
system/group number, and status and error messages.
Zone Number - Indicates the currently selected zone from 1 up to 16. A
zone is a collection of channels that can be any combination of the
conventional and SMARTNET/SmartZone types.
Channel Number - Indicates the currently selected channel.
Figure 3 Front Panel Display
Telephone/Special
Call Channel
Encryption
10-Character Alphanumeric Display
Zone
No.
Status
Display
Chnl
No.
Scan Edit
Mode