Service Manual

December 2008 5300 ES Series Mobile Radio Service Manual 2-1
S ECTION
2
Section 2Radio Programming
2.1 Programming Setup
The following items are required to program the radio. The part numbers of this
equipment are shown in Table 1.1.
• A Windows
®
-based computer (see next section)
• Remote Programming Interface (RPI), Part No. 023-5300-001
• Programming cable from RPI to radio (see Section 2.1.2 for more information).
• EFJohnson PC Configure programming software, Part No. 023-9998-488.
Figure 2.1 shows the programming setup.
Figure 2.1 Programming Setup (Standard Front/Remote Models)
Note The -005 cable, the -488 software, RPI, and a CD manual are included in the 5300 Series
Programming Kit, Part No. 250-5000-004.