Service Manual Part 2

TRANSCEIVER PROGRAMMING
3-23
September 2001
Part No. 001-5100-001
Tx Period - Defines the period during which trans-
missions occur with the microphone audio unmuted
(without user intervention). Times of 10-120 seconds
in 10-second steps can be selected.
Emergency Alarm
Disabled
- No emergency signal is sent when the user
presses the Emergency option switch.
Normal
- When the user presses the Emergency
option switch, an emergency signal is sent to the dis-
patcher. Audio and visual feedback is provided by
the radio.
Silent
- Same as “Normal” except no audio or visual
feedback is provided.
Retry Counter
- When “Unlimited” is selected, an
emergency call is repeated until acknowledged or
canceled. When “Limited” is checked, calls are
attempted only the specified number of times.
3.6.7 SMARTNET/SMARTZONE SYSTEM LISTS
SCREENS
Clicking System Lists in the left pane under
SMARNET > General or the button in the
General screen described in Section 3.6.2 displays the
screens used to program the various lists that are
unique for each SMARTNET/SmartZone system.
These screens are as follows:
Trunking Phone List Screen
This screen programs the phone number list if
used (see Section 2.7.6). To edit this list, click the
Trunking Phone List tab and then the “Modify List”
button on the right side of the screen. The following
information is then programmed in the dialog box that
is displayed:
Entry Number
- This box selects the entry to be
edited. The scroll bars to the right of this box select
the desired entry. A phone list can contain up to 16
entries. Selecting a new entry number automatically
validates and stores the current entry. If the current
entry contains an invalid field (for example, too
many digits in the phone number), the entry number
does not change and the invalid field is highlighted.
Entry Alias
- Up to ten characters can be entered to
identify the phone number. This identification is dis-
played when phone numbers are selected by the user
from the list. Only uppercase letters can be entered,
so lowercase letters are automatically converted to
uppercase by the program.
Phone Number
- This is the number dialed when the
location is selected. Characters that can be entered
include 0-9, #, (,), and P (a “P” programs a pause).
The maximum number of digits excluding (,) and
spaces is 16, and the maximum including (,) and
spaces is 24.
Close
- Clicking this button verifies the current entry,
stores it, and then closes the dialog box. If the current
entry contains an invalid field, the dialog box does
not close and the invalid field is highlighted.
Help
- Accesses the Help screen. Help can also be
selected at any time by pressing the F1 key.
Message Aliasing Screen
This screen associates an alias (name) with each
message number (see Section 2.7.8). To edit this list,