Operator's Manual
Table Of Contents
- SAFETY TRAINING INFORMATION
- FEATURES
- TABLE OF CONTENTS
- OPTION SWITCH FUNCTIONS
- CONTROLS AND DISPLAY
- GENERAL OPERATION
- CONVENTIONAL FEATURES
- Introduction
- Display Mode Selection
- Monitoring Before Transmitting
- Monitor Mode
- Busy Channel Lockout
- Call Guard Squelch
- Penalty Timer
- Conversation Timer
- Repeater Talk-Around
- Power Output Select
- Emergency Mode (Conventional)
- Conventional Mode Scanning
- Priority Channel Sampling
- Placing and Receiving Standard Conventional Calls
- DTMF/ANI Signaling
- Project 25 Mode Features
- Keypad Programming
- Channel Parameter Programming
- SMARTNET/SMARTZONE FEATURES
- MISCELLANEOUS
- INDEX
CONTROLS AND DISPLAY
16
Side Controls
Option Switches - These three switches can be system operator pro-
grammed to control a specific function (see page 11).
PTT Switch - This switch is pressed to turn the transmitter on. The indi-
cator on the top panel lights red when the transmitter is keyed.
Accessory Connector - Connection point for optional accessories such
as a speaker/microphone.
Battery Pack - To remove the battery, press the release on the bottom
toward the front of the transceiver and slide the battery outward.
Option Switches
PTT Switch
Battery Pack
Accessory
Connector