Operator's Manual
Table Of Contents
- SAFETY TRAINING INFORMATION
- FEATURES
- TABLE OF CONTENTS
- OPTION SWITCH FUNCTIONS
- CONTROLS AND DISPLAY
- GENERAL OPERATION
- CONVENTIONAL FEATURES
- Introduction
- Display Mode Selection
- Monitoring Before Transmitting
- Monitor Mode
- Busy Channel Lockout
- Call Guard Squelch
- Penalty Timer
- Conversation Timer
- Repeater Talk-Around
- Power Output Select
- Emergency Mode (Conventional)
- Conventional Mode Scanning
- Priority Channel Sampling
- Placing and Receiving Standard Conventional Calls
- DTMF/ANI Signaling
- Project 25 Mode Features
- Keypad Programming
- Channel Parameter Programming
- SMARTNET/SMARTZONE FEATURES
- MISCELLANEOUS
- INDEX
CONTROLS AND DISPLAY
15
Top Panel Controls
On-Off/Volume - Turning the knob clockwise turns power on and sets
the volume level. Turning it counterclockwise to the detent turns power
off.
Channel Switch - This 16-position switch allows up to 16 channels to be
selected. This switch operates in conjunction with up to 16 programmable
zones to allow up to 256 channels to be selected.
Programmable Option Switch - This is a three-position selector switch
that can be system operator programmed to control some function (see
page 11).
Antenna Connector - Connection point for the antenna. Make sure that
the antenna is tight before using the radio.
Emergency Switch - If the radio is programmed for emergency transmis-
sions, pressing this switch alerts a dispatcher, for example, of an emer-
gency condition. Refer to descriptions on pages 35 and 58 for more
information.
Emergenc
y
(Option)
On-Off
Volume
Channel
Switch
Antenna
Connecto
r
Option
Sw
Switch