User Manual

RADIO-WIDE FEATURES
12
May 2002
Part No. 002-5100-100
4. Press the Up/Down switch to highlight the desired
mode. Then select the F2 key to select that mode.
5. To step back to the previous level or exit the menu
mode, press the F1 (Clear) key.
Time-Out Timer
The time-out timer disables the transmitter if it is
keyed continuously for longer than the programmed
time. It can be programmed for times from 15 seconds
up to 3 minutes, 45 seconds or it can be disabled.
If the transmitter is keyed for longer than the
programmed time, the transmitter is disabled, a contin-
uous tone sounds, and “TX TIMEOUT” is displayed.
Five seconds before time-out occurs, a warning beep
sounds to indicate that time-out is approaching. The
timer and tone are reset by releasing the PTT switch. A
different time may be programmed on each channel.
Conventional channels can also be programmed
with a penalty timer which prevents transmissions for
a time after the transmitter is disabled by the time-out
timer. Refer to page 17 for more information.
Table 5 Programmable Option Key and Menu Mode Functions
Function
Menu
Display
Available in Mode:
See Description
on Page:
Conv. SMARTNET SmartZone
Alert tones On-Off Tones X X X 13
Backlight On-Off Backlight X X X 9
Call Alert Select X X 27
Call Response Select X X 24
Clear/Secure Select Security X X X 10
(Digital) Talk Group Select Select TG X 19
Display Information Select Display X 18
Emergency Select Emergency X X X 18, 28
High/Low Power Select Tx Power X X X 13
Home Zone Select Home Zone X X X 13
Key (Encryption) Select X X X 10
Keypad Lock Select (Opt sw only) X X X 9
Keypad Programming Select Keypad Prg X 20
Messaging X X 28
Monitor Mode Select Monitor X 16
Normal/Selective Select Squelch X 17
Phone Call Select X X 26
Priority Channel Select Priority X 18
Private Call Select X X 24
Radio Wide Scan Select X X X 13
Repeater Talk-Around Select Talk Arnd X 18
Scan Mode Select Scan X X X 13
Scan List Edit Select Scan Edit X X X 13
Scan List Select Scan Selct X X X 13
Selective Squelch Code Select Sqlch Code X 17
Site Lock Select X 30
Site Search Select X 30
Status Select X X 28
Unit Call Select Unit Call X 19
Unprogrammed (not used) - X X X -