Operating Manual

March 2008 5100 ES Models II/III Portable Radio Operating Manual 2-9
Controls and Display
Non-Enhanced Unit Call Non Enhanced Unit Call is Received Two medium pitched beeps
repeated every 6 seconds
Action
OTAR
Acknowledgement
OTAR Hello Acknowledgement
Received
High Pitched Beep Action
Out of Range Trunking Radio is in an Out of Range
State
Low pitched, very long tone
repeated
Action
Priority Call Received Radio has received a Priority Call Two low pitched beeps Action
Radio Self-Test Pass Self Test has Passed Medium Pitched Beep followed by
a higher pitched beep
Keypress
Return to Normal • Dynamic Regrouping has been
Canceled
• Voltage has returned to Normal
• Temperature has returned to Normal
• Conventional: TX Penalty Timer has
Expired
Medium Pitched Beep followed by
a higher pitched beep
Action
Ring Radio has received an interconnect
and is waiting for Unit Call target
subscriber to respond
Telephone Ringing Action
System Retry Tone that occurs after the 2nd ISP or
ISW retry
Continuous low pitched tone Action
Talk Permit Tone (When PTT Button is Pressed)
verifying that the system is accepting
transmissions
Three medium pitched beeps Action
Temperature Change Temperature has changed from
Normal to Hot or Too Hot
Two medium pitched beeps Action
Unprogrammed
Channel
Radio is turned to an Unprogrammed
Channel
Low Pitched Continuous Tone Action
Valid Keypress / Feature
ON
Valid Key Press or a Feature has been
turned on
Medium Pitched Short Tone Keypress
Volume Boundary Volume boundary reached when
adjusting the volume with Volume Up /
Down Buttons
Two medium pitched beeps Action
Table 2.3 Tones for the 5100 ES Radios (Continued)
Message Name Message Description Audible Description
Tone
Category