Operating Manual

March 2008 5100 ES Models II/III Portable Radio Operating Manual 6-7
SMARTNET / SmartZone / P25 Trunked Features
6.5 Telephone Calls
The telephone call feature allows telephone calls to be placed and received over the public
telephone system using your radio. Telephone calls are programmed to operate in one of
the following modes:
• Disabled
• Answer-only capability
• List only - Telephone numbers can be selected from a pre programmed list only (direct
entry using the keypad is not allowed).
• Unlimited - Telephone numbers can be selected from a list and also dialed directly
using the keypad.
Both limited and DTMF keypad models can place telephone calls by recalling the
telephone number from a pre programmed list as just described. However, only DTMF
keypad models can directly dial telephone numbers using the keypad. The keypad remains
active during a call for overdialing DTMF digits.
6.5.1 Placing a Telephone Call
To recall from a list:
1 Momentarily press the Phone option key or select that menu parameter. The alias of the
last called telephone number is displayed. The interconnect call mode is indicated by
in the display.
2 If required, press the Up/Down switch to display the desired number. The alias of each
number is displayed.
3 Press and release the PTT switch and “Dialing” is displayed. Refer to the bulleted list
following Step
3 below for events that may then occur.
To make direct entry using DTMF keypad:
1 Press and hold the Phone option key until a tone sounds (approximately one second).
The alias of the last called telephone number is displayed if it is in the phone number
list. Otherwise, the last eight digits of the last called telephone number are displayed.
The interconnect call mode is indicated by
in the display.
2 Enter the telephone number using the 0-9, *, and # keys. To enter a pause (indicated by
“P”), press
* and then #. To erase the last digit, press the <F1> key. The number scrolls
to the left in the display so that the eight right-most digits are always displayed.
Numbers up to sixteen digits (including pauses) can be entered. Press the Phone option
key to cancel the call.