Operating Manual

3-18 5100 ES Models II/III Portable Radio Operating Manual March 2008
General Operation
3.10.2 Control Top and Keypad Test Mode
Once Control Top and Keypad Test Mode is selected from the menu, all icons are
displayed and the LED lights red. Upon release of the emergency button, the radio is in
Control Top and Keypad Mode. In this mode, all of the buttons, switches, and knobs on
the radio can be tested to determine if they are operating correctly. Performing any event
with the radio results in a tone as well as a display of what action took place. A summary
of the displays is included as Table 3.4. If the radio is in Control Top and Keypad Test
Mode but no action is taking place, the message “CH Test” continues to display.
Table 3.4 Control Top and Keypad Test Mode Display Messages
Action Display
Emergency button pressed/released Emer: 1/Emer: 0
Channel selector switch moved Chan: x, where x is the current position of the switch
Toggle switch moved Toggle: x, where xis the current position of the switch
Volume knob turned Vol: x, where x is the current position of the knob from 0 –
255 (this will vary at the boundaries)
Side button 1 pressed/released SB1: 1/SB1: 0
Side button 2 pressed/released SB2: 1/SB2: 0
Side button 3 pressed/released
SB3: 1/SB3: 0
PTT button pressed/released
PTT: 1/PTT: 0
F1 button pressed/released
F1: 1/F1: 0
F2 button pressed/released
F2: 1/F2: 0
F3 button pressed/released
F3: 1/F3: 0
F4 button pressed/released
F4: 1/F4: 0
Up button pressed/released
Up: 1/Up: 0
Down button pressed/released
Down: 1/Down: 0
“1” button pressed/released
Btn 1: 1/Btn 1: 0
“2” button pressed/released
Btn 2: 1/Btn 2: 0
“3” button pressed/released
Btn 3: 1/Btn 3: 0
“4” button pressed/released
Btn 4: 1/Btn 4: 0
“5” button pressed/released
Btn 5: 1/Btn 5: 0
“6” button pressed/released
Btn 6: 1/Btn 6: 0
“7” button pressed/released
Btn 7: 1/Btn 7: 0
“8” button pressed/released
Btn 8: 1/Btn 8: 0
“9” button pressed/released
Btn 9: 1/Btn 9: 0
“0” button pressed/released
Btn 0: 1/Btn 0: 0
“*” button pressed/released
Btn *: 1/Btn *: 0
“#” button pressed/released
Btn #: 1/Btn #: 0