User Manual Part 1

11
environmental sealed with
terminals for acc cable
Handheld Control Unit and
Siren Controller
Handheld control unit with
junction box and 17 ft control
cable
250-5300-101
Siren controller kit (without
loudspeaker)
250-5300-100
Siren loudspeaker, model TS100
for light bar installation
585-5300-007
Siren loudspeaker, model MS100
compact for behind-grill
installation
585-5300-009
Remote Control Conversion Kit
Dual control kit (convert front
mount to remote or dual controls)
Control station power supplies
15 amp, 117 VAC, 60 Hz (light
duty)
585-4001-202
15 amp, 230 VAC, 50 Hz (light
duty)
585-4001-204
15 amp, 117 VAC (heavy duty) 239-0226-111
15 amp, 230 VAC (heavy duty) 239-0226-211
Programming Accessories
PCConfigure programming
software, CD
023-9998-488
PCTune software, CD (current
logic boards)
023-9998-499
Programming Kit, includes -488
software, -005 cable, CD
programming manual
250-5000-004
Encryption Keyloader and
Accessories
SMA (PDA) keyloader 250-5000-945
SMA keyloader to 4100 radio
cable
023-TBD
SMA keyloader to 4300 radio
cable
023-TBD
Data Cable
Data pigtail cable, female DB9 597-2002-282
Mounting Hardware - The mounting hardware and DC power cable for standard models are
shown in Figure 2-1. A 22-foot (6-meter) DC power cable is used for both front and remote
mount applications. The cable is cut to the required length at installation and any excess
discarded.
The accessory cable plugs into the accessory pigtail of the transceiver, and is used to connect
such things as an external speaker, ignition sense input, and a horn alert. It includes two 22-foot
(6-meter) and three 2-foot (0.6-meter) wires that are connected as required to external points. The
adapter cable is used to connect a 86xx-series power cable to these transceivers.