User's Manual

Table Of Contents

Operation

3 -2 3800 Digital Repeater Operating Manual October 2009

3.2 EIC Menu Modes

The main menu mode can be selected to display various repeater parameters. Figure 3.2 is a block diagram of the menu

mode struct

The menu mode is selected and controlled by the Menu Control knob as follows.

ure.

• To select the menu mode, press or rotate the Menu Control knob. The first main menu “CPU” is then displayed.

• In general, rotating the Menu Control scrolls through available parameters, and pressing it selects the displayed

parameter.

• The

icon in the upper right corner of the display indicates that if the knob is pressed, the next lower menu level is

selected. Conversely, if

is displayed, the next higher level is selected. The icon indicates that the displayed

parameter or function is selected.

• The

icon in the left-most position of the bottom line indicates that additional parameters have scrolled off to the

left. Likewise, the

icon in the right-most position indicates additional parameters have scrolled off to the right.

• Selecting [Back] returns a level up in menu hierarchy.