User's Manual

Table Of Contents

Controls & Indicators

2 -4 3800 Digital Repeater Operating Manual October 2009

Channel Controller Controls and Indicators

Ethernet Link Data Rate LED

This indicates the main Ethernet link data rate. If this LED is on, the rate

is 100 Mbps. If this LED is off, the rate is 10 Mbps.

Ethernet Status LED

If on, the repeater is connected to Ethernet.

Reset Switch

Pressing this switch resets the channel controller card.

Note Both of the Channel Controller card LEDs should be ON continuously after you initialize the repeater.

(Two LEDs are not used in the field.)