User's Manual

Controls & Indicators
2 -2 3800 Digital Repeater Operating Manual October 2009
2.1 Site Controller Card
The site controller card provides the high-level call processing for the entire site. Unless using backup site controllers,
only one repeater in each system contains a site controller card. The Site Controller card’s controls and indicators are
illustrated in Figure 2.2 and described following.
Figure 2.2 Site Controller Controls and
Indicators
Site Controller Controls and Indicators
Auxiliary Status LED
LED Indication
Software Version < 3.0
Software Version > or = 3.0
On Solid
Ethernet link datarate = 100 Mbps
Site controller is in standby as redundant
controller.
Flashing
NA
Site Controller is active in Trunking
Mode.
Off
Ethernet link datarate = 10 Mbps
NA