Service manual

RECEIVER REVERT BOARD (RRB)
10-2
March 2000
Part No. 001-3139-502
10.4 SWITCH SETTINGS
Table 10-1 BAUD SWITCH SETTINGS
Module
Switch-Section
Normal Link
(9600 baud)
Remote Link
(2400 baud)
RVM S5- sec 6 ON OFF
RDM S1- sec 5 ON OFF
MLM S3- sec 6 OFF ON
10.5 ALIGNMENT
1. With the RVM installed, bring up the channel. Con-
nect a transmission test set to J1, pin 11 on the RRB
and record the audio level from the RVM.
__________
2. With the RVM removed, bring up the channel. Con-
nect the transmission test set to J1, pin 11 and adjust
R1 for the same audio level from the RVM.
Figure 10-2 REVERT HARNESS