MULTI-NET® II VOTER SYSTEM Second Printing March 2000 Part No. 001-3139-502 3-00mwp -1 Printed in U.S.A. February 1996 Part No.
February 1996 Part No.
MULTI-NET II VOTER SYSTEM Copyright 1997 by the E.F. Johnson Company The E.F. Johnson Company designs and manufactures two-way radio equipment to serve a wide variety of communications needs. Johnson produces equipment for the mobile telephone and land mobile radio services which include business, industrial, government, public safety, and personal users. LAND MOBILE PRODUCT WARRANTY The manufacturer’s warranty statement for this product is available from your product supplier or from the E.F.
February 1996 Part No.
TABLE OF CONTENTS 1 INTRODUCTION 1.1 1.2 1.4 DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 MAIN COMPONENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 RECEIVER DECODER MODULE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TABLE OF CONTENTS (CONT.) 2.11 RDM ALIGNMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8 EQUIPMENT REQUIRED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8 CLOCK ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TABLE OF CONTENTS (CONT.) 3.13 3.14 FULL RDM - ALL TEST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VOLTAGE MEASUREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RECEIVER FREQUENCY CHECK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VOTER INTERFACE . . . . . .
TABLE OF CONTENTS (CONT.) 6 VOTER DIAGNOSTIC MODULE (VDM) 6.1 6.2 6.3 DESCRIPTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 VDM SETUP PROCEDURE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3 SWITCH SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TABLE OF CONTENTS (CONT.) LIST OF FIGURES 1-1 1-2 1-3 1-4 1-5 1-6 1-7 1-8 1-9 1-10 1-11 1-12 1-13 1-14 1-15 1-16 1-17 1-18 1-19 1-20 1-21 1-22 1-23 1-24 2-1 2-2 2-3 2-4 2-5 2-6 2-7 2-8 2-9 2-10 2-11 2-12 2-13 2-14 2-15 2-16 2-17 2-18 2-19 3-1 3-2 3-3 3-4 3-5 3-6 3-7 3-8 LOCAL SITE BLOCK DIAGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 REMOTE VOTER SYSTEM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TABLE OF CONTENTS (CONT.) 3-9 3-10 3-11 3-12 3-13 3-14 3-15 3-16 3-17 3-18 3-19 3-20 3-21 3-22 3-23 3-24 3-25 3-26 3-27 3-28 3-29 3-30 3-31 3-32 3-33 3-34 3-35 3-36 3-37 3-38 3-39 3-40 3-41 3-42 3-43 3-44 3-45 3-46 3-47 3-48 3-49 3-50 3-51 3-52 3-53 3-1 3-2 3-3 3-4 3-5 3-6 4-1 4-2 4-3 RDM REPEATER SETUP PARAMETERS SCREEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7 REPEATER LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TABLE OF CONTENTS (CONT.) 4-4 4-5 5-1 5-2 5-3 5-4 5-5 5-6 5-7 5-8 5-9 6-1 6-2 6-3 6-4 6-5 6-6 6-7 6-8 7-1 7-2 7-3 7-4 8-1 8-2 8-3 8-4 8-5 8-6 8-7 8-8 8-9 8-10 8-11 8-12 8-13 8-14 8-15 8-16 9-1 9-2 9-3 9-4 9-5 CDM COMPONENT LAYOUT (OPPOSITE COMPONENT SIDE VIEW) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8 CENTRAL DE-MULTIPLEXER MODULE SCHEMATIC DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9 RVM BLOCK DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . .
TABLE OF CONTENTS (CONT.) 3-1 3-2 4-1 4-2 5-1 5-2 5-3 5-4 5-5 5-6 6-1 6-2 6-3 7-1 8-1 8-2 8-3 9-1 RMM RSSI INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 RMM SWITCH SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 CDM RSSI INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION SECTION 1 INTRODUCTION 1.1 DESCRIPTION Each RMM is capable of handling 10 RDMs, with 3 RMMs required per 30 channel site. With 3 RMMs per site (maximum) and 32 voted receiver sites, the maximum number of RMMs is 3 x 32 = 96 (see Section 4). The Voter System is an additional feature of the Multi-Net System that allows receiver voting. The voter system is used in Wide Area systems that require simultaneous RF coverage over an area not capable of coverage by a single repeater site.
INTRODUCTION 1.2.5 VOTER DIAGNOSTICS MODULE The Voter Diagnostics Module (VDM), in the Switch, is the data communication buffer between the SMM and the Voting System (see Section 7). The type of data exchanges between the Voting System and the VDM pertains to: Memory Read of the voters; Receiver Site Enable/Disable; and Alarm/Control Information. RDM RRB RMM 1.2.6 VOTER SHELF Each Voter Shelf (VSH) contains 13 slots for cRVM, RVM and CDM modules (see Section 8).
INTRODUCTION OCXO OCXO POWER SUPPLY c R V M c R V M INTERFACE BOARD c R V M c R V M c R V M INTERFACE BOARD C D M INTERFACE BOARD INTERFACE BOARD INTERFACE BOARD RDM RDM RDM RDM RDM RECEIVER RECEIVER RECEIVER RECEIVER RECEIVER POWER SUPPLY Figure 1-3 5-CHANNEL LOCAL SITE (with 1 REMOTE SITE) 1-3 March 2000 Part No.
INTRODUCTION OCXO OCXO POWER SUPPLY RMM INTERFACE BOARD INTERFACE BOARD INTERFACE BOARD INTERFACE BOARD INTERFACE BOARD RDM RDM RDM RDM RDM RECEIVER RECEIVER RECEIVER RECEIVER RECEIVER POWER SUPPLY Figure 1-4 5-CHANNEL REMOTE SITE March 2000 Part No.
INTRODUCTION OCXO OCXO POWER SUPPLY C C C C C D D D D D M M M M M c R V M R V M c R V M R V M c R V M RDM RDM R V M c R V M RDM R V M c R V M RDM R V M RDM POWER SUPPLY Figure 1-5 5-CHANNEL LOCAL SITE (with 5 REMOTE SITES) 1-5 March 2000 Part No.
March 2000 Part No.
INTRODUCTION 1.3 VOTER SYSTEM ALIGNMENT 4. Record the settings of S2 in the MLM drawer. 1 _____ 2 _____ 3 _____ 4 _____ 5 _____ 6 _____ 7 _____ 8 _____ Note: See Section 3.11 for 2000 RDM alignment. 1.3.1 PRELIMINARY LS 1 B 2 ON 1. Verify that S3, section 5 in the MLM is set for the proper mode (see Figure 1-23). For a Voter system the switch should be “up” or “On” indicating Voter Mode. For a Non-Voter system, the switch should be “down” or “Off” indicating Non-Voter Mode.
INTRODUCTION 1.3.2 8000 SERIES RDM AND RVM ALIGNMENT 9. On the RVM connect a Transmission Test Set to the TP associated with the input port being used (see Section 6.8 and Figure 6-4.) Verify that this TP is self-adjusted in approximately 3 minutes to -20 dBm. 1. Connect an RF Signal Generator to Receiver Ant 1, set S1 to “ANT1”. (See Figures 2-3 or 2-5.) Port 1 - TP2 Port 2 - TP3 Port 3 - TP4 Port 4 - TP5 2.
INTRODUCTION 2. Adjust a communications service monitor to the RDM receiver frequency (transmit frequency of the portable). Verify that the Low Speed Data Deviation is approximately 1 kHz (800 Hz for 900 MHz systems). NOTE 1: Two procedures are detailed for RDM and RVM alignment. Procedure 1 requires a communications service monitor with signal generator and spectrum analyzer capabilities, a Transmission Test Set, and a Multi-Net portable radio.
INTRODUCTION 4. RDM Site - Disable the internal modulation source without changing the deviation setting. Enable the external modulation port. Adjust the MED box to encode the Multi-Net data. Adjust the data out level of the MED box to achieve 1 kHz (800 Hz for 900 MHz) of deviation as measured on the Signal Analyzer. NOTE: 800 MHz systems - 1 kHz Low Speed Data and 1.5 kHz for the DTMF tone. 900 MHz systems - 800 Hz Low Speed Data and 800 Hz for the DTMF tone. 9.
INTRODUCTION 12.Transmitter Site - At the transmit site record the deviation of the transmitted signal (it should be 2.5 kHz for 800 MHz systems and 1.6 kHz for 900 MHz systems). If the deviation is not correct, adjust U44 in the RVM (see Step 10) to attain 2.5 kHz deviation for 800 MHz systems and 1.6 kHz deviation for 900 MHz systems. Refer to NOTE 2 on Page 1-9. 1 LSB 2 3 4 MSB ON S2 Figure 1-16 U44 LEVEL ADJUST 13.
INTRODUCTION PROCEDURE 1 NOTE: This assumes that no audio or background noise from the portable is being received and then retransmitted. Necessary equipment: • • • • 7. If the Low Speed Data is not at 1 kHz (800 Hz for 900 MHz) of deviation, refer to the repeater service manual for proper adjustment. RF Signal Source capable of internal modulation of 1 kHz tone. RF Signal Analyzer capable of measuring deviation of an RF signal. Transmission Test Setup Multi-Net portable equipped with a DTMF keypad.
INTRODUCTION 10.Transmitter Site - At the transmit site record the deviation of the transmitted signal (it should be 1 kHz of Low Speed Data for 800 MHz and 800 Hz of Low Speed Data for 900 MHz systems). If the deviation is not correct, adjust the level to the correct setting as described in the repeater service manual. 2. RDM Site - Connect the MED box to the Signal Source as described in the MED box operation and service manual.
INTRODUCTION 3. On the MLM drawer connect a Transmission Test Set to TP3 and adjust R19 for a meter reading of -12 dBm for LL/DC links or -28 dBm for MW/T1 links. 1 LSB 2 3 1 2 4. On the associated CIM connect a Transmission Test Set to J11 and adjust R41 for a meter reading of -6 dBm. 4 8 S5 1.3.5 FSK RECEIVE DATA LEVEL FROM SWITCH Figure 1-19 CIM S5 FSK ALIGNMENT TONE 2.
INTRODUCTION 1 LSB 2 4 1 LS 1 B 2 ON 3 MSB ON 3 4 2 5 1 4 2 8 S5 6 7 4 8 MS B 8 S2 Figure 1-21 CIM S5 ALIGNMENT TONE Figure 1-22 MLM S2 GATE AND TRANSMIT 3. In the CIM set S5 as shown in Figure 1-19 to generate a 1200 Hz alignment tone over the voice path. 2. In the CIM set S5 as shown in Figure 1-21 to generate an alignment tone. 4. Connect a Transmission Test Set to J12 and adjust R86 for a level of -20 dBm with LL/DC links or -36 dBm with MW/T1 links. 3.
March 2000 Part No.
CR403 CR402 CR404 (YEL) (RED) (GRN) 1-17 3 2 1 J24 6 5 4 3 2 1 MON/ LINE EQU R102 TP9 J15 2 1 2 1 J14 R90 TP8 MAIN OUTPUT (Tx) J2 P33 S3 S4 ON 1 ON S1 32 4 3 2 1 J27 TP3 11 10 9 8 7 6 5 4 3 2 1 J32 TP4 R83 R86 ON S5 3 1 2 J36 4 3 2 1 4 3 2 1 4 3 2 1 ON MON/ MAIN INPUT (Rx) J22 LINE J1 (LINE) 12 12 J21 EQU R44 J13 J12 J11 R41 DS1 CR401 (GRN) S2 TP5 J31 11 10 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 64 32 P2 33 1 P1 INTRODUCTION Figure 1-24 CIM ALIGNMENT POINTS DIAGR
INTRODUCTION March 2000 Part No.
INTRODUCTION SPECIFICATIONS VOTER SHELF Dimensions 21.4" W x 12.5" D x 8.2" H Environment -30°C to +60°C (-22°F to +142°F) at 20% to 80% humidity (noncondensing) Average Power 26 modules x 6.1W ÷ 0.7 (efficiency) = 227W Average Heat 227W x 3.6 = 817 BTU per hour MODULES CDM and RVM Dimensions 11.5" W x 8" H (8.6" including extractors) Weight 0.95 lbs. Environment -30°C to +60°C (-22°F to +142°F) at 20% to 80% humidity (noncondensing) Average Power and Current +5V DC at 0.8A = 4.
INTRODUCTION March 2000 Part No.
8000 SERIES RECEIVER DECODER MODULE (RDM) SECTION 2 8000 SERIES RECEIVER DECODER MODULE (RDM) 2.1 GENERAL 2.3 RSSI UPDATES The Receiver Decoder Module (RDM) is designed for either operation with the 800 MHz or 900 MHz receivers and is located in the receiver drawer. Refer to the Multi-Net 8000 Repeater Service Manual, Part No. 001-8000-377 or Multi-Net 8900 Repeater Service Manual, Part No. 001-8900-379 for detailed information on the circuit description and alignment. The RDM is powered from 13.8V DC.
8000 SERIES RECEIVER DECODER MODULE (RDM) 2.4 DISCONNECT Disconnect by the Mobile can occur one of two ways. One way is when the RDM is no longer decoding the subaudible “Word” from the Mobile. The RDM sends a Receive Time-Out byte by the RS-232 to the RMM. The second way is when the RDM decodes the Turn-off Code from the Mobile. The RDM sends a Receive Turn-Off Byte by the RS-232 to the RMM, see Figure 2-1. Figure 2-2 TEST TONE RELATIONSHIP 2.
8000 SERIES RECEIVER DECODER MODULE (RDM) 2.6.2 SECOND OSCILLATOR FREQUENCY ADJUSTMENT 5. Tune L6, L7, L8, L9, L10, and L11 for maximum DC voltage at TP1 (reduce the generator output as in the preceding step). 1. Set the frequency monitor to 55.7000 MHz. Monitor the signal by inserting the pickup loop through the opening in the shield over the second oscillator stage. 6. Repeat the adjustments in step d, tuning for maximum DC voltage. Also repeat step e, tuning for best SINAD.
8000 SERIES RECEIVER DECODER MODULE (RDM) 3. Switch diversity control switch S1 on the receiver board to the center "DIV" position. Increase the unmodulated generator output so that the audio unsquelches. 2. Connect a SINAD meter to the AUDIO TEST jack on the receiver drawer front panel. 3. Increase the generator output to obtain a SINAD reading of -12 dB. The generator output should be 0.35 microvolt or less. 4.
8000 SERIES RECEIVER DECODER MODULE (RDM) 2.8 900 MHz RECEIVER DRAWER ALIGNMENT 2.8.3 SYNTHESIZER ADJUSTMENT 2.8.1 INTRODUCTION Refer to the alignment points and test setup diagram in Figure 2-5 and proceed as follows: (Refer to Appendix B for frequencies.) This alignment procedure should be performed with the drawer installed in the repeater because a reference signal from the local oscillator drawer is required for proper operation of the receiver drawer. 1.
8000 SERIES RECEIVER DECODER MODULE (RDM) 2.8.6 FRONT END ALIGNMENT 2.8.7 IF ALIGNMENT Front end helicals L6-L11 are adjusted using the peak/dip method. Proceed as follows: NOTE: A signal generator stable to ±0.1 PPM or better is required to properly tune the IF stages. Refer to Section 2.8.2 for more information. 1. Connect a DC voltmeter to TP1. Preset the cores of L12, L13, L14, T1, T2, T3 and T4 near the top of the can. 2.
8000 SERIES RECEIVER DECODER MODULE (RDM) Figure 2-5 900 MHz RECEIVER ALIGNMENT POINTS DIAGRAM 2.9 900 MHz RECEIVE DATA LEVEL ADJUSTMENT 2.10 900 MHz RECEIVER PERFORMANCE TESTS 1. Connect a signal generator to the receiver antenna jack, see Section 2.8.6. Set the generator to the receive channel frequency with an output level of 100 µV, modulated with 150 Hz at ±800 Hz deviation. 2.10.1 SINAD SENSITIVITY 1. Set the RF signal generator to the channel frequency, modulated with 1 kHz at ±1.
8000 SERIES RECEIVER DECODER MODULE (RDM) 2.10.2 DIVERSITY AND SQUELCH THRESHOLD LEVEL 2.11.2 CLOCK ADJUSTMENT Verify the clock frequency of the microprocessor. 1. Establish the 0 dB reference for quieting as described in Section 2.10.1. Adjust the LOCAL AUD control so that audio can be heard from the speaker when the receiver unsquelches. 1. Measure the frequency at U1, pin 19 with a frequency counter and 10:1 (10M ohm) probe. 2. Frequency should be 11.059 MHz ±500 Hz. 2.
8000 SERIES RECEIVER DECODER MODULE (RDM) 6. Using a DC voltmeter, verify that 4V ±.2V is measured at TP1. 9. Adjust the generator until -15 dB is read on the SINAD meter. 7. Adjust T5 on the receiver board if necessary. 10.Connect an Oscilloscope to TP7. 8. If T5 was adjusted, repeat Step 4. 11. Verify TP7 is toggling between a 0 and 1. 2.11.5 FSK LEVEL 12.Adjust R84 if necessary. NOTE: Before this test can be performed, the Receive Audio Level test must be completed. 13.
8000 SERIES RECEIVER DECODER MODULE (RDM) 6. Using a transmission test set adjust R35 for -12 dBm at TP4. 8. Using a transmission test set adjust R46 for -20 dBm at TP4. 7. On the RDM, set S1, sections 1 "Off", 2/3 "On" and press the Reset (S3). 9. On the RDM, set S1, sections 1-3 "On" and press the Reset (S3). Figure 2-6 RRB TO RDM INTERCONNECT J585 ANTENNA JACKS ANT 2 ANT 1 RDM RECEIVER LEDs AUDIO TEST JACK ON/OFF/VOL Figure 2-7 RDM DRAWER March 2000 Part No.
MSB LSB 8000 SERIES RECEIVER DECODER MODULE (RDM) Figure 2-8 RDM ALIGNMENT POINTS DIAGRAM 2-11 March 2000 Part No.
8000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER PART NUMBER DESCRIPTION SYMBOL NUMBER 800 MHz RECEIVER DECODER MODULE PART NO.
8000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER DESCRIPTION PART NUMBER CR009 CR010 CR011 CR012 CR013 CR014 CR015 CR016 CR017 CR018 CR019 CR020 CR021 CR022 CR023 1N4448 SI diode 1N4448 SI diode 1N4448 SI diode 1N4448 SI diode 1N4448 SI diode 1N4448 SI diode 1N4448 SI diode 1N4448 SI diode 1N4448 SI diode 1N4448 SI diode 1N4448 SI diode 1N4448 SI diode 1N4448 SI diode 1N4448 SI diode 1N4448 SI diode 523-1500-883 523-1500-883 523-1500-883 523-1500-883 523-1500-883 523-1500-883 523-1500-883 523-1
8000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER R 025 R 026 R 027 R 028 R 029 R 030 R 031 R 032 R 033 R 034 R 035 R 036 R 037 R 038 R 039 R 040 R 041 R 042 R 043 R 044 R 045 R 046 R 047 R 048 R 058 R 059 R 060 R 061 R 062 R 063 R 064 R 065 R 066 R 067 R 068 R 069 R 070 R 071 R 072 R 074 R 075 R 076 R 077 R 078 R 079 R 080 R 081 DESCRIPTION 100k ohm ±5% 1206 SMD 2.2k ohm ±5% 1206 SMD 2.
8000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER DESCRIPTION PART NUMBER R 133 10k ohm ±5% 1206 SMD R 134 10k ohm ±5% 1206 SMD R 135 10k ohm ±5% 1206 SMD 569-0115-103 569-0115-103 569-0115-103 RT073 RT085 RT097 RT109 569-3001-001 569-3001-001 569-3001-001 569-3001-001 Thermistor Thermistor Thermistor Thermistor S 001 DIP switch 8-pos S 002 DIP switch 10-pos S 003 Momentary SPST 583-5002-008 583-5002-010 583-4005-002 TP001 TP002 TP003 TP004 TP005 TP006 TP007 TP008 Brown tip jack Red tip ja
8000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER PART NUMBER DESCRIPTION MP019 Drawer bracket MP020 Flexible grommet MP050 Plastic wear washer SYMBOL NUMBER 017-2222-210 574-0001-025 574-9019-050 C 042 C 043 C 044 C 045 C 046 C 047 C 048 C 049 C 050 C 051 C 053 C 055 C 056 C 057 C 058 C 059 C 060 C 061 C 062 C 063 C 064 C 065 C 066 C 067 C 068 C 069 C 070 C 071 C 072 C 073 C 074 C 075 C 076 C 077 C 078 C 079 C 080 C 081 C 082 C 083 C 084 C 085 C 086 C 087 C 088 C 089 C 090 RDM 8000 RECEIVER P
8000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER C 091 C 092 C 093 C 094 C 095 C 096 C 097 C 098 C 099 C 100 C 101 C 102 C 103 C 104 C 105 C 106 C 107 C 108 C 109 C 110 C 111 C 112 C 113 C 114 C 115 C 116 C 117 C 118 C 119 C 120 C 121 C 122 C 123 C 125 C 126 C 127 C 128 C 129 C 130 C 131 C 132 C 133 C 134 C 135 C 136 C 137 C 138 DESCRIPTION 3 pF ±5% 50V NPO submin 39 pF ±5% 50V NPO submin 10 pF ±5% 50V NPO submin 1000 pF ±20% 50V Y5U disc .
8000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER DESCRIPTION CH602 Top/bottom covers PART NUMBER 017-2197-041 EP001 EP001 EP002 EP003 EP004 EP010 EP011 EP012 4-chnl board shield 017-2089-001 Helical coil form 013-1627-101 Crystal pin insulator 018-1080-008 Insulator washer TO-72 574-5005-009 3/8" coil shield 578-0002-001 1/8" heat shrink tubing 042-0241-553 0.055 ID x 0.015 Teflon tubing 058-0053-515 0.055 ID x 0.
8000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER DESCRIPTION PART NUMBER Q 001 Q 002 Q 003 Q 004 Q 005 Q 006 Q 007 Q 008 Q 009 1 GHz low noise J-FET low noise RF TO-92 J-FET low noise RF TO-92 Si NPN FM osc/mul TO-92 Si NPN FM osc/mul TO-92 Si NPN FM osc/mul TO-92 Si PNP UHF high gain Si PNP UHF high gain Si NPN gen purp TO-92 576-0003-052 576-0006-014 576-0006-009 576-0003-002 576-0003-002 576-0003-002 576-0003-037 576-0003-037 576-0003-053 R 001 R 002 R 003 R 004 R 005 R 006 R 007 R 008 R 00
8000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER R 089 R 090 R 091 R 092 R 093 R 094 R 095 R 096 R 097 R 098 R 099 R 100 R 101 R 102 R 103 R 104 R 105 R 106 R 107 R 108 R 109 R 110 R 111 R 115 R 116 R 117 R 190 R 191 R 192 R 193 R 194 R 195 DESCRIPTION 10k ohm ±5% 1/4W CF 47k ohm ±5% 1/4W CF 47k ohm ±5% 1/4W CF 100k ohm ±5% 1/4W CF 100k ohm ±5% 1/4W CF 68k ohm ±5% 1/4W CF 10k ohm ±5% 1/4W CF 10k ohm ±5% 1/4W CF 4.
8000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER PART NUMBER DESCRIPTION SYMBOL NUMBER RDM 8900 RECEIVER PART NO.
8000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER C 083 C 084 C 085 C 086 C 087 C 088 C 089 C 090 C 091 C 092 C 093 C 094 C 095 C 096 C 097 C 098 C 099 C 100 C 101 C 102 C 103 C 104 C 105 C 109 C 110 C 111 C 111 C 113 C 114 C 115 C 116 C 117 C 118 C 119 C 120 C 121 C 122 C 123 C 124 C 125 C 126 C 127 C 128 C 129 C 130 C 131 C 132 DESCRIPTION 39 pF ±5% 50V N750 disc 62 pF ±5% 50V N750 disc 2 pF ±5% 500V comp 11 pF ±5% 50V NPO disc .001 µF ±20% Y5U disc .
8000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER DESCRIPTION PART NUMBER HW001 HW002 HW003 HW004 HW004 HW007 HW009 HW010 HW011 Tension lock nut CPS Rubber grommet 0.
8000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER R 041 R 042 R 043 R 044 R 045 R 046 R 047 R 048 R 049 R 050 R 051 R 052 R 053 R 054 R 055 R 056 R 057 R 058 R 059 R 060 R 061 R 067 R 068 R 069 R 070 R 071 R 072 R 073 R 074 R 075 R 076 R 077 R 078 R 079 R 080 R 082 R 083 R 084 R 085 R 086 R 087 R 088 R 089 R 090 R 091 R 092 R 093 DESCRIPTION 220 ohm ±5% 1/4W CF 10 ohm ±5% 1/4W CF 47 ohm ±5% 1/4W CF 10k ohm ±5% 1/4W CF 47k ohm ±5% 1/4W CF 10k ohm ±5% 1/4W CF 220 ohm ±5% 1/4W CF 270 ohm ±5% 1/4W CF
8000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER PART NUMBER DESCRIPTION Y 002 17.15 MHz crystal 521-4017-150 Z 001 Z 002 Z 003 Z 005 45 MHz 4-pole 10 kHz BW 10.7 MHz 4-pole 7.5 kHz BW 10.7 MHz 4-pole 10 kHz BW 10.7 MHz 2-pole 532-0009-004 532-0006-004 532-0006-005 532-0010-001 SYMBOL NUMBER RDM RSSI CABLE PART NO.
8000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER DESCRIPTION PART NUMBER Q 203 Q 204 Q 205 NPN 470 MHz amplifier NPN 470 MHz amplifier NPN general purpose 576-0003-027 576-0003-027 576-0003-053 R 200 R 201 R 202 R 203 R 204 R 205 R 206 R 207 R 208 R 209 R 210 R 211 R 212 R 213 R 214 R 215 R 216 R 217 R 221 R 222 R 223 R 224 R 225 R 226 R 227 R 228 R 229 R 230 R 231 R 232 R 233 R 234 R 235 R 236 R 237 R 238 R 239 R 240 R 241 R 242 R 243 R 244 R 245 51 ohm ±5% 1/4W CF 180k ohm ±5% 1/4W CF 390 o
8000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER C 315 C 316 DESCRIPTION 3900 pF ±2% 50V NPO cer 3900 pF ±2% 50V NPO cer CH001 Drawer cover, top/bottom CR301 CR302 CR303 CR304 CR305 CR306 CR307 CR361 CR362 Si diode 1N4448 Si diode 1N4448 Red LED Red LED Red LED Red LED Si diode 1N4448 3A Si diode 3A Si diode PART NUMBER SYMBOL NUMBER 510-3545-392 510-3545-392 PART NUMBER DESCRIPTION MP050 Plastic wear washer MP300 Heat sink TO-220 MP300 OCXO bracket 574-9019-050 539-0009-100 017-2222-150
8000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER DESCRIPTION PART NUMBER R 328 R 332 R 333 R 334 R 339 R 340 R 341 R 342 R 343 R 361 270 ohm ±5% 1/4W CF 51 ohm ±5% 1/4W CF 1k ohm ±5% 1/4W CF 1k ohm ±5% 1/4W CF 10k ohm ±5% 1/4W CF 1k ohm ±5% 1/4W CF 1k ohm ±5% 1/4W CF 10k ohm ±5% 1/4W CF 10k ohm ±5% 1/4W CF 3.
W13 LOGIC NOISE SQUELCH W14 SQUELCH ENABLE RED CR1 GREEN CR2 W15 NOISE AMP OUTPUT W16 13.
R40 R39 + C74 C38 C33 + 1 U8 8 14 C1 + C16 R42 R4 7 7 1 8 14 C4 14 R69 C3 8 1 U2 U10 C45 R5 C R48 1 8 R9 March 2000 Part No.
+5V U2D /DTR 1 PI 0 RxA 2 PI 1 FSK 3 PI 2 LTR 8 PI 7 Vcc 40 PO 0 AD0 PO 1 AD1 PO 2 AD2 PO 3 AD3 PO 4 AD4 PO 5 AD5 74C906 9 +4.5V C50 .01 U17A 3403 1 R77 12k RT85 8k C49 .01 2 R75 4.7k U17B 3403 7 CR14 CR15 CR13 C48 2200pF REPEATER Rx AUDIO C19 1 R28 10k 5 R29 100k R84 500k TP3 2 9 10 + U17D 3403 14 R82 1M 13 12 + R83 10k C46 .1 R80 47k R116 43k 7 U10C 4049 C27 1 TP7 R39 100k +4.5V R32 C20 100k 1 1 R34 4.7k C66 .1 U6D 3403 14 13 +4.
COAX TO J4 TO J101 PIN14 C79 R41 C81 R44 R47 C86 C5 R2 Y2 R28 C134 S D G C158 L3 C55 Q2 C10 + C56 L11 L10 L9 L8 L7 L6 COAX TO J3 C8 C151 C125 + + 8 C126 U11 1 7 R82 + C128 DIV S1 + C123 ANT1 ANT2 14 U10 1 CR16 R94 TO J5 AUDIO TEST LOCAL ON/OFF/VOL March 2000 Part No.
+9V C76 .01 R42 10 C75 100pF R43 47 C154 100 + RETRIGGERABLE MONOSTABLE MULTIVIBRATOR R59 1k W103 14 12 MR 3 0 U3 54LS393 2 1 CLK R61 4.7k 2 MR R64 10k PCOUT 13 PCIN U4 4568 Q 9 R65 100k R63 100k +5V + C107 1 R66 10k 2 + C108 100 U5 4528 A DP3 5 10 F DP2 6 4 B DP1 7 5 C 9 C1 C60 33pF R31 27k L19 C57 .01 C58 .001 C59 1.9-15.7pF CR3 C64 .01 C65 C67 .75pF 68pF Q4 3002 R34 47k C68 68pF C149 .
TO J101 J6 PIN 14 FROM SYNTH BD R41 C78 R49 C80 C84 R45 R44 C85 R47 C70 R40 R39 R34 R35 C79 C81 B E C Q6 CR3 R46 C86 C87 TP5 J2 L20 C92 C1 L21 R31 Q7 (ANT 1) L1 L2 C5 C2 C100 L6 CR2 L5 C3 L3 R3 L7 L8 L9 C7 L10 L11 L4 C158 C6 R2 C10 C4 C91 C90 R1 C97 C94 C93 CB E C77 C E CR1 CR4 B C157 L22 Q5 R48 R52 R51 R50 L23 R36 TP6 R53 C12 R4 R5 C19 B C71 C72 C73 C88 C89 C9 C15 E C14 R7 R42 C17 C34 R14 Q1 R57 C66 L24 C96 C E B L19 +C1
+9V R42 10 + R56 47 BUFFER C62 .01uF R61 470 L25 R38 47 C71 22 L18 R32 47k J6 L26 FROM SYNTHESIZER R34 47k C63 68 C60 100 R33 10k C64 68 C65 4.7 L19 C82 470 C83 39 C84 62 C149 .01uF R49 47 C150 470 C89 100 C93 10 C86 11 C81 12pF R50 10k C77 10 C85 R46 2 10k R45 47k R51 47k C80 470 C87 .001uF CR3 TO SYNTHESIZER C95 R53 .68 10k TP4 CR14 L22 L23 L24 C91 3 R48 270 L20 L21 TP6 C66 .01uF C97 100 CR4 C96 2 C100 .
J4 (RX) J402 (EXCITER) 5 4 1 C220 1 E C233 8 1 C208 + R203 Y201 CR201 R290 R200 CR290 C209 R209 R208 R206 R207 R211 R205 R212 R242 C224 C222 R206 J202 R213 C207 C234 B CR202 R214 4 E C235 + C 16 R240 + 1 R237 C217 Q204 16 3 R238 R239 U203 U204 M2 4 M3 R236 R216 M1 C216 S202 R222 TX RX 1 M0 2 B P205 9 R241 L203 C 1 C202 R226 R232 8 TO RECEIVER OR EXCITER J201 CR204 Q203 9 C203 L201 CR203 C221 16 S J203 R227 L205 20 Q201 R233 C
SOURCE R246 100 3 +9V DC 1 GND 4 AUDIO IN 2 LOCK DETECT OUT (0 = UNLOCKED) C206 39 CR202 5.1V + C208 100 C209 .01 + C210 1 C212 .01 + C213 1 + C214 1 + C215 1 + C216 1 + C217 1 C226 39 R233 1.
ALARM OUTPUT 1 + C302 8 C 1 F C308 R342 R341 R340 PIN 3 B 7 + PIN 4 TO OCXO 1 PIN 5 PIN 1 C C395 + 8 E J304 R339 U305 1 Q300 8 14 U306 R322 R321 Q305 9 16 CR306 B R326 R327 J301 C298 8 C307 R308 E C396 + U303 R318 R315 R324 R314 9 16 TO OCXO 2 PIN 5 PIN 1 B 1 Q304 PIN 3 E R305 OCXO-2 1 C R328 B Q300 R325 CR305 E 7 C306 R301 C 16 PIN 4 8 Q301 R310 R309 1 C305 OCXO-1 C 14 R323 R333 CR303 B U300 1 R304 R302 E R313 R311 R312 CR3
BUFFER +5V OCXO 1 5 MHz J303 RF OUT 1 GND 2 GND 3 +13.8V IN 4 OCXO SELECT R328 270 Y300 R340 1k C297 150pF R339 10k CR301 C295 .01 Q300 3053 INTERRUPT SWITCH BINARY COUNTER 4 U311A 54LS00 1 3 2 U311B 54LS00 4 6 5 10 9 8 1 CLK 49 dB VARIABLE ATTENUATOR BOARD LINE DRIVER +5V U311C 54LS00 15 14 U312 Q1 4 54LS393 L300 S300 U313 R332 51 C315 3900 J305 1.25 MHz RF OUTPUT C316 3900 55121 BUFFER +13.8V SOURCE C305 1000 R311 3.
March 2000 Part No.
2000 SERIES RECEIVER DECODER MODULE (RDM) SECTION 3 2000 SERIES RECEIVER DECODER MODULE (RDM) 3.1 GENERAL The Multi-Net System is capable of handling 30 channels and the Voter System is capable of handling 32 voted receiver sites, the maximum number of RDMs is 960. The 2000 Series Receiver Decoder Module (RDM) is designed for either operation with the 800 MHz or 900 MHz receivers. Refer to the Summit® QX Repeater Service Manual, Part No. 001-2008-102 or Summit QX Repeater Service Manual, Part No.
2000 SERIES RECEIVER DECODER MODULE (RDM) 3.3 RSSI UPDATES RDM sends a Receive Time-Out byte by the RS-232 to the RMM. The second way is when the RDM decodes the Turn-off Code from the Mobile. The RDM sends a Receive Turn-Off Byte by the RS-232 to the RMM. See Figure 3-1. The RDM continues to sample the RSSI every 10 milliseconds and averages the RSSI for each “WORD”. When this average has been determined, the RDM sends the updated RSSI information to the RMM.
2000 SERIES RECEIVER DECODER MODULE (RDM) 3.5.1 HOW TO USE THIS SECTION Although the program uses color to highlight certain areas on the screen, a monochrome (black and white) monitor or LCD laptop also provide satisfactory operation. Most video formats such as EGA and VGA are supported. A serial port is required to connect the Repeater to the computer. One or two serial ports are standard with most computers. One port may be used by the mouse.
2000 SERIES RECEIVER DECODER MODULE (RDM) Creating a Windows Shortcut or Program Icon NOTE: Adequate memory space may not be available even if the computer is equipped iwth several megabytes of memory. This is because most DOS programs run in only the 640K block of conventional memory. If you want to try and run the program from Windows 95, a shortcut icon can be created that can then be double clicked to start the program. To create this shortcut icon, select Start -> Settings -> Taskbar.
2000 SERIES RECEIVER DECODER MODULE (RDM) 3.7 2000 RDM PROGRAMMER 3.10 PULL DOWN MENUS When the program is loaded into the computer and executed, the menu shows the files available from the directory. The program is used to Create, Edit, Transfer and Receive the repeater and channel parameters described in Section 3.10.8. 3.10.1 MENU DISPLAYS The menus available are listed at the top of the screen. Move the cursor with the arrow keys to highlight the menu name.
2000 SERIES RECEIVER DECODER MODULE (RDM) Save Print Repeater Configuration This saves the edited version of an existing file loaded in the buffer under the same filename in the directory and deletes the old file. Loads a new file created in the Edit menu into the directory. Select the destination for the configurations. Printer - Prints to printer connected to PC. File - Writes printable test to selected filename. Save As Select which RDM data will be printed.
2000 SERIES RECEIVER DECODER MODULE (RDM) 3.10.3 EDIT NOTE: The parameters are shown in the lower left of the pop-up screen for reference. Repeater Number Each RDM is programmed with a repeater number from 1-30 for Multi-Net or 1-20 for LTR. Number selection can be arbitrary as long as each RDM is assigned a different number.
2000 SERIES RECEIVER DECODER MODULE (RDM) System Key The system RDMs and all mobiles are programmed with a unique System Key. The function of the System Key is to ensure that only authorized users can access a Multi-Net system. The RDM System Key is programmed at the factory, and the mobile system key is programmed into the transceiver by the system operator. The System Key is a number which is used by both the RDMs and the mobiles to encode the data stream.
2000 SERIES RECEIVER DECODER MODULE (RDM) Select Repeater 3.10.4 TRANSFER Select the repeater number to be programmed or edited from the pop-up menu (see Figure 3-10). Move the cursor with the arrow keys to highlight the repeater number and press Enter. Repeater List Figure 3-13 TRANSFER MENU default Rptr 1 Write Setup Parameters ------------- This command sends the contents of a file to the repeater and programs the EEPROM memory in the Main Processor Card (MPC).
2000 SERIES RECEIVER DECODER MODULE (RDM) UID Home GID Data Received From Radio Pri Data Transmitted to Radio Stat RX/TX Data RF Data HARDWARE Time RF Line Monitor Receive Synthesizer Revisions Mode Select Normal Receive High Stability Test Wideband Audio Output LO Injection RSSI Figure 3-18 HARDWARE PROGRAMMING FLOWCHART 3.10.5 HARDWARE RF Data The A/D Monitor Screen shows the state of the lines (see Figure 3-20).
2000 SERIES RECEIVER DECODER MODULE (RDM) Revision/Version Mode Select The Revision/Version is displayed for the repeater modules. The format for all modules is R.V. (revision.version). The MPC information also includes the software release date and the repeater serial number (see example in Figure 3-21). The Mode Select screen places the repeater either in the normal mode or the test mode. In the Normal mode the repeater operates as a normal repeater.
2000 SERIES RECEIVER DECODER MODULE (RDM) 3.10.6 TEST 3.10.7 UTILITIES Figure 3-25 UTILITIES MENU COM Port Figure 3-23 TEST MENU This is the COM port used to send and receive data from the Repeater MPC. An interface cable connects the Repeater to the computer (see Figure 3-27). Receiver This menu selection walks through the alignment of the receiver on the computer screen. Refer to Sections 3.11 and 3.
2000 SERIES RECEIVER DECODER MODULE (RDM) 6. The Setup Parameters screen appears (see Figure 3-29). Fill in the parameters for this repeater. A brief description of the parameters is in Table 3-2. Full descriptions are in Section 3.10.3. 7. Select parameters, press F2 to accept. 8. Highlight EDIT, press Enter. Figure 3-28 COLOR MODE SELECTION 9. Highlight FILES, press Enter. Alarm Display 10.Highlight SAVE, press Enter. This screen displays a scrolling list of alarms generated by the repeater. 11.
2000 SERIES RECEIVER DECODER MODULE (RDM) Table 3-2 RDM SETUP PARAMETERS Parameter Repeater Number Channel Number System Key Telco Network Type System Priority Type Voter Baud Rate Test Mode ID Revert Operation Signal Strength Boundary Indexes Response 1-30 Multi-Net 1-920 800 MHz 1-399 900 MHz 0-65535 Description Each repeater is assigned a Home Repeater number from 1-30 for Multi-Net. Each repeater is programmed with a number of the channel that it is operating on.
2000 SERIES RECEIVER DECODER MODULE (RDM) 3.11 800 MHz RECEIVER ALIGNMENT NOTE: The Channel Number, Channel Frequency and Synthesizer Frequency appear at the bottom of the screen. CRITICAL ADJUSTMENT 3.11.3 TCXO FREQUENCY ADJUST The TCXO must be adjusted within 5 minutes of turning the power on to the RDM. Do not under any circumstances try to set frequency later on in any of the tests, as TCXO frequency stability cannot then be guaranteed. 1.
2000 SERIES RECEIVER DECODER MODULE (RDM) 4. Tune Z213 for 2V ±0.05V on TP4. 3.11.7 AUDIO DISTORTION 5. Tune R264 for 387 mV RMS, ±5 mV RMS, on TP4. 1. Plug a 16 ohm load at J204 on the RDM. 6. Repeat Steps 4 and 5. 2. Connect a distortion analyzer to the 16 ohm load. 7. Measure the distortion on TP4. 3. Measure the distortion of the receive audio at J204 on the RDM with the local volume control set to 2.8V RMS. 8. Tune L207, L209, L211 and L225 for minimum distortion <5%, (typically <3%). 4.
2000 SERIES RECEIVER DECODER MODULE (RDM) J201 2 1 20 19 TP3 9 13 R261 R264 6V TP6 TP4 U206 U208 12V U207 Y201 U209 R309 3.5V 12V TP2 R310 L220 TP1 Z213 PIN 6 L223 L224 TP5 L225 L211 L210 L206 L204 L205 L203 L202 L201 L207 L209 Figure 3-30 800 MHz RECEIVER ALIGNMENT POINTS (REVISION 5 OR EARLIER) J201 2 1 20 19 TP3 9 13 R261 R264 6V TP6 TP4 U206 U208 12V U207 Y201 R282 U209 R309 3.
2000 SERIES RECEIVER DECODER MODULE (RDM) 3.12 900 MHz RECEIVER ALIGNMENT If power is removed from the local oscillator drawer, the oscillators require a minimum restabilization period of 30 minutes. No frequency-critical adjustments should be attempted until the oscillator frequency has stabilized. The receiver frequencies are locked to the 1.250000 MHz reference frequency from the local oscillator drawer. This frequency is stable to within ±0.1 PPM from -30°C to +60°C as required by the FCC.
2000 SERIES RECEIVER DECODER MODULE (RDM) 3.12.2 VOLTAGE MEASUREMENTS 3. Record the voltage on J201, pin 13 (TP5) ____. Apply power to the Receiver by plugging the 20pin cable from the RF Interface Board into J201 (see Figure 3-32). 4. The Synthesizer is programmed for 199 channels below the Receive Channel. 5. The voltage on U209, pin 6 (TP2) should be > 2V DC. Measure the voltages at the following pins. U206, pin 1 U207, pin 1 U208, pin 1 U210, pin 1 +12V DC ±0.4V 6.
2000 SERIES RECEIVER DECODER MODULE (RDM) 3.12.7 AUDIO DISTORTION Apply power to the Receiver by plugging the 20pin cable from the Interface Board into J201 (see Figure 3-32). 1. Plug a 16 ohm resistive load at J204 on the RFIB and connect a distortion analyzer to the load. 3.13.2 RECEIVER FREQUENCY CHECK 2. Measure the distortion of the receive audio at J204 on the MAC with the local volume control set to 2.8V RMS. 1.
2000 SERIES RECEIVER DECODER MODULE (RDM) 2. Adjust R261 in the receiver for 0.8V DC (±0.02V DC) at TP3 for 800 MHz Receivers and 0.7V DC for 900 MHz Receivers. Receiver SINAD Measurement 1. Adjust the RF generator for 100 µV into the receiver with a 1 kHz tone at ±3 kHz (1.5 kHz at 900 MHz). Receiver Miscellaneous Tests (Optional) 2. Connect a 16 ohm load and distortion analyzer to J204 of the Interface Board. Several additional tests may be performed on the Receiver as listed below: 3.
2000 SERIES RECEIVER DECODER MODULE (RDM) Leased Line/Direct Connect (default) -12 dBm (194 mV RMS) Table 3-3 ALARMS Display No. 0 1 2 3 4 5 6 7 8 9 A B C D E F Microwave/T1 (optional) -28 dBm (31 mV RMS) Definition Test Mode Not Used Normal Operation Revert Operation Receiving Data Not Used Not Used Receive Synthesizer Out of Lock High Stability Synth Out of Lock Data Processor Failure Not Used Not Used Downloading Code Not Used Erasing Code Failure FSK Level Adjustment 1.
2000 SERIES RECEIVER DECODER MODULE (RDM) C260 C134 C135 C261 C279 U126 C278 C277 C276 CR209 C274 C128 C270 C107 C267 C272 U128 U221 C108 R295 C127 C273 C275 C264 C263 R123 Figure 3-34 RDM ALIGNMENT POINTS (OPP COMP SIDE) 3-23 March 2000 Part No.
2000 SERIES RECEIVER DECODER MODULE (RDM) U218 J201 R248 R222 R282 R207 T201 U204 J209 R271 J206 S101 J202 J203 J204 U213 J205 Figure 3-35 RDM ALIGNMENT POINTS (COMP SIDE) March 2000 Part No.
2000 SERIES RECEIVER DECODER MODULE (RDM) 1.
2000 SERIES RECEIVER DECODER MODULE (RDM) 1.
5 6 TXA- 1 4 MB 3 2 1 TXA+ MA TXS- TXS+ J8 4 3 2 1 RXA- 6 RXA+ 5 EB EA RXS- RXS+ J7 VIO/GRN GRN/VIO VIO/BLU BLU/VIO YEL/BRN BRN/YEL WIRE COLORS ARE SOLID/STRIPE VIO/BRN BRN/VIO VIO/ORN ORN/VIO SLT/YEL YEL/SLT UNIT 4 TXA- TXA+ MB MA TXS- TXS+ 3-27 N/C J8/6 J7/6 23 48 25 50 24 49 J7/5 J8/5 YEL/GRN GRN/YEL YEL/BLU BLU/YEL BLK/BRN BRN/BLK N/C 6 5 4 3 2 1 J6 J8/4 22 47 J8/3 UNIT 3 J7/4 21 46 J7/3 RXA- 6 5 4 3 2 1 J8/2 20 45 J8/1
2000 SERIES RECEIVER DECODER MODULE (RDM) NOT USED PIN NUMBERS 26 WHT/BLU RXS- 1 BLU/WHT RXS+ 27 WHT/ORN TXS- 2 ORN/WHT TXS+ 28 WHT/GRN EB 3 GRN/WHT EA 29 WHT/BRN MB 4 BRN/WHT MA 30 WHT/SLT RXA- 5 SLT/WHT RXA+ 31 RED/BLU TXA- 6 BLU/RED TXA+ 32 RED/ORN RXS- 7 ORN/RED RXS+ 33 RED/GRN TXS- 8 GRN/RED TXS+ 34 RED/BRN EB 9 BRN/RED EA 35 RED/SLT MB 10 SLT/RED MA 36 BLK/BLU RXA- 11 BLU/BLK RXA+ 37 BLK/ORN TXA- 12 ORN/BLK TXA+ 38 BLK/GRN RXS
2000 SERIES RECEIVER DECODER MODULE (RDM) SPECIFICATIONS VOTER SHELF Dimensions 21.4" W x 12.5" D x 8.2" H Environment -30°C to +60°C (-22°F to +142°F) at 20% to 80% humidity (noncondensing) Average Power 26 modules x 6.1W ÷ 0.7 (efficiency) = 227W Average Heat 227W x 3.6 = 817 BTU per hour MODULES CDM and RVM Dimensions 11.5" W x 8" H (8.6" including extractors) Weight 0.95 lbs.
2000 SERIES RECEIVER DECODER MODULE (RDM) March 2000 Part No.
2000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER PART NUMBER DESCRIPTION SYMBOL NUMBER 800 MHz VOTER RDM PART NO. 023-2008-230 A 200 Voting Receiver A/L Intfc Bd A 201 800 MHz Receiver A 202 20-pin ribbon cable 023-2000-700 023-2008-200 023-2000-703 EP200 0.156 OD RF shield gasket 574-3002-036 HW200 4-40 x 0.094 hex nut NPS HW201 10-32 x 0.375 nut CPS HW202 6-32 panhead torx ZPS HW203 6-32 mach panhead ZPS HW204 6-32 mach panhead ZPS HW205 No. 4 shakeproof washer HW206 6 x 0.
2000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER C 202 C 203 C 204 C 205 C 206 C 207 C 208 C 209 C 210 C 211 C 212 C 213 C 214 C 215 C 216 C 217 C 218 C 219 C 220 C 221 C 222 C 231 C 232 C 233 C 234 C 235 C 236 C 237 C 238 C 240 C 251 C 252 C 253 C 254 C 255 C 256 C 257 C 258 C 259 C 260 C 261 C 262 C 263 C 264 C 266 C 267 C 268 DESCRIPTION 6.2 pF ±5% NPO 1206 chip 4.7 µF 16V tantalum SMD 56 pF ±5% NPO 1206 chip 6.8 pF ±5% NPO 1206 chip 56 pF ±5% NPO 1206 chip 6.
2000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER DESCRIPTION PART NUMBER C 323 C 325 C 326 C 328 C 330 C 331 C 332 C 333 C 334 C 335 C 336 C 337 C 338 C 356 C 357 C 358 C 359 C 362 C 363 C 364 C 365 C 366 C 367 C 373 C 374 C 375 C 376 .001 µF ±5% NPO 1206 chip 100 pF ±5% NPO 1206 chip 3 pF ±5% NPO 1206 chip 820 pF ±5% NPO 1206 chip 27 pF ±5% NPO 1206 chip 27 pF ±5% NPO 1206 chip 27 pF ±5% NPO 1206 chip 27 pF ±5% NPO 1206 chip 27 pF ±5% NPO 1206 chip 27 pF ±5% NPO 1206 chip 4.
2000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER DESCRIPTION PART NUMBER Q 209 Q 210 Q 211 Q 214 Q 215 Q 216 Q 217 Q 218 NPN UHF low noise SOT-23 Si NPN amp SOT-23 Si NPN amp SOT-23 NPN UHF low noise SOT-23 NPN UHF low noise SOT-23 NPN .
2000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER PART NUMBER DESCRIPTION TP005 Red vertical tip jack 0.08 TP006 Red vertical tip jack 0.
2000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER C 236 C 237 C 238 C 240 C 244 C 245 C 246 C 247 C 248 C 249 C 250 C 251 C 252 C 253 C 254 C 258 C 259 C 260 C 261 C 262 C 264 C 265 C 266 C 267 C 268 C 269 C 270 C 271 C 272 C 273 C 274 C 275 C 277 C 278 C 279 C 280 C 281 C 282 C 284 C 285 C 286 C 287 C 288 C 289 C 290 C 291 C 292 DESCRIPTION 220 pF ±5% NPO 1206 chip 5.6 pF ±5% NPO 1206 390 pF ±5% NPO 1206 4.7 µF 16V tantalum SMD .
2000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER DESCRIPTION PART NUMBER C 364 C 365 C 366 C 367 C 368 C 369 C 370 C 371 C 372 C 373 C 374 C 375 1.5 pF ±5% NPO 1206 chip 4.7 µF 16V tantalum SMD .001 µF ±10% X7R 1206 27 pF ±5% NPO 1206 chip 27 pF ±5% NPO 1206 chip 27 pF ±5% NPO 1206 chip 27 pF ±5% NPO 1206 chip 1.3 pF ±5% NPO 1206 chip 1.3 pF ±5% NPO 1206 chip 3.9 pF ±5% NPO 1206 chip 1.5-5 pF ceramic SMD 1.
2000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER R 203 R 204 R 205 R 206 R 207 R 208 R 209 R 211 R 212 R 213 R 214 R 215 R 217 R 218 R 219 R 220 R 221 R 222 R 223 R 224 R 225 R 226 R 227 R 228 R 229 R 230 R 231 R 232 R 234 R 239 R 240 R 241 R 242 R 243 R 244 R 246 R 248 R 249 R 250 R 251 R 252 R 253 R 254 R 255 R 256 R 257 R 258 DESCRIPTION 200 ohm ±5% 1206 SMD 270 ohm ±5% 1206 SMD 510 ohm ±5% 1206 SMD 10 ohm ±5% 1206 SMD 510 ohm ±5% 1206 SMD 1.
2000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER R 319 R 321 R 322 R 323 R 324 DESCRIPTION 10k ohm ±5% 1206 SMD 510 ohm ±5% 1206 SMD 560 ohm ±5% 1206 SMD Zero ohm ±5% 1206 SMD 10k ohm ±5% 1206 SMD PART NUMBER SYMBOL NUMBER 569-0115-103 569-0115-511 569-0115-561 569-0115-001 569-0115-103 RT101 1k ohm ±5% chip thermistor 569-3013-002 TP001 TP003 TP004 TP005 TP006 Red tip jack, vert. 0.08 Red tip jack, vert. 0.08 Red tip jack, vert. 0.08 Red tip jack, vert. 0.08 Red tip jack, vert. 0.
2000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER C 222 C 223 C 224 C 225 C 226 C 227 C 228 C 229 C 230 C 231 C 232 C 233 C 234 C 235 C 236 C 237 C 238 C 239 C 240 C 241 C 242 C 243 C 244 C 245 C 246 C 247 C 248 C 249 C 250 C 251 C 252 C 253 C 254 C 255 C 256 C 257 C 258 C 259 C 260 C 261 C 262 C 263 C 264 C 265 C 266 C 267 C 268 DESCRIPTION .022 µF ±5% X7R 1206 .01 µF ±5% X7R 1206 100 pF ±5% NPO 1206 chip 100 pF ±5% NPO 1206 chip 100 pF ±5% NPO 1206 chip .
2000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER DESCRIPTION PART NUMBER EP101 2-hole crystal pin insulator 018-1080-001 F 201 2A/250V subminiature fuse 534-0017-017 FH201 PC board mount fuse holder 534-1017-001 HW101 HW102 HW103 HW104 HW105 4-40 mach panhead ZPS #4 shakeproof washer 4-40 x 0.094 nut NPB 0.
2000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER R 219 R 220 R 221 R 222 R 223 R 224 R 225 R 226 R 227 R 228 R 229 R 230 R 231 R 232 R 233 R 234 R 235 R 236 R 237 R 238 R 239 R 240 R 241 R 242 R 243 R 244 R 245 R 246 R 247 R 248 R 249 R 250 R 251 R 252 R 253 R 254 R 255 R 256 R 257 R 258 R 259 R 260 R 261 R 262 R 263 R 264 R 265 DESCRIPTION 18k ohm ±5% 1206 SMD 150k ohm ±5% 1206 SMD 5.1k ohm ±5% 1206 SMD 100k ohm trim pot 47k ohm ±5% 1206 SMD 1.5k ohm ±5% 1206 SMD 6.
2000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER DESCRIPTION PART NUMBER U 108 U 109 U 110 U 111 U 112 U 113 U 114 U 115 U 116 U 117 U 118 U 119 U 120 U 121 U 122 U 123 U 124 U 125 U 126 U 127 U 128 U 201 U 203 U 204 U 205 U 207 U 208 U 210 U 211 U 212 U 213 U 215 U 216 U 217 U 218 U 219 U 220 U 221 U 222 U 223 U 224 Quad 2-in NAND 74HC00 Driver/Rcvr RS-232C/v.
2000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER DESCRIPTION PART NUMBER MP203 Front door lens MP204 Lock cam MP204 Card guide 6" 032-0758-025 537-9007-012 574-9015-007 NP200 Nameplate NP201 FCC bar code label NP202 FCC bar code label 559-5861-163 559-0220-003 559-0220-003 SYMBOL NUMBER OCXO DRAWER PART NO.
2000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER DESCRIPTION PART NUMBER HW012 5/16" cable clamp HW901 0.025 x 0.
2000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER R 916 R 917 R 918 R 919 R 920 R 921 R 922 R 923 R 924 R 925 R 926 R 927 R 928 R 929 R 930 R 931 R 932 R 933 R 934 R 935 R 936 R 937 R 938 R 939 R 940 R 941 R 942 R 943 R 944 R 945 R 946 R 948 R 949 R 950 R 951 R 952 R 953 R 954 R 955 R 956 R 957 R 958 R 959 R 960 R 961 R 962 R 963 DESCRIPTION 4.7k ohm ±5% 1206 SMD 1k ohm ±5% 1206 SMD 10k ohm ±5% 1206 SMD 270 ohm ±5% 1206 SMD 1M ohm ±5% 1206 SMD 30k ohm ±5% 1206 SMD 10k ohm ±5% 1206 SMD 5.
2000 SERIES RECEIVER DECODER MODULE (RDM) SYMBOL NUMBER DESCRIPTION PART NUMBER SYMBOL NUMBER OCXO DRAWER POWER SUPPLY PART NO. 023-2000-930 C 101 C 102 C 103 C 104 C 105 C 106 C 107 C 108 C 109 C 110 C 111 C 112 1000 µF 50V axial low temp 6.8 µF 35V SMD tantalum .001 µF ±5% NPO 1206 chip 220 µF 25V aluminum axial 15 µF 20V SMD tantalum 15 µF 20V SMD tantalum .001 µF ±5% NPO 1206 2200 µF 25V aluminum axial 15 µF 20V tantalum SMD .001 µF ±5% NPO 1206 .001 µF ±5% NPO 1206 4.
2000 SERIES RECEIVER DECODER MODULE (RDM) March 2000 Part No.
3.
+12V GROUND WO 805 WO 807 3 R807 TRANSMIT VCO ONLY. +12V WO 801 MOD IN C813 R814 10k C802 TX C804 2.7pF 2 .4pF C805 .47uF .1uF C806 4.7uF 1uF C812 4.7pF 3 .9pF C813 6 .8pF 5.6pF CR802 105G HYPER R803 10 100 R804 4 .7k 12k R807 180 240 C808 R802 3 .6k 27pF Q801 1300 CAPACITIVE MULTIPLIER C809 + 15 C802 2 1.5pF 2 C807 27pF R801 10 C810 27pF L803 .
3 1 70 70 O W O W 2 70 O W 11 9 16 13 5 5 4 3 2 2 1 1 5 8 P702 8 16 13 K702 8 4 6 4 CR702 1 R709 WO707 1 WO706 R703 C706 + C706 +C701 CONNECTOR 515-7110-008 C705 11 9 R708 R707 C708 R704 C703 3 C702 CR701 WO705 C704+ R706 4 1 Q702 6 4 6 + C709 6 8 Q701 7 U701 7 R705 8 P701 P702 K701 8 R702 R701 WO704 RVM AUDIO 4 R706 100k C701 1 P701 RDM AUDIO 4 R701 10k R702 100k C703 220pF R703 10k + 7 U701 + 2904 R704 82k U701B 1 TO MAIN
C347 C334 R277 Q203 C239 R223 R226 C229 Q204 R225 C226 C224 C225 R221 C268 C273 R294 R293 Q214 EP206 R311 C275 C310 Q215 R300 L220 C356 C303 C357 CH203 R291 L222 B E A201 CH200 EP1 L203 C203 + Q218 EP201 C311 C362 + March 2000 Part No.
+12V RX R247 2.2k R203 62 + C336 4.7 C337 56pF RF AMP +12V RX CR203 +C203 4.7 Q218 3657 L201 A201 RF IN L202 R204 10k L203 C201 6.8pF L226 L221 C204 56pF L204 C206 56pF C202 6.2pF EP201 L205 + C362 4.7 MIXER C205 6.8pF R201 10k C208 24pF L228 L227 4 U201 RF LRMS-2H IF Q201 3636 CR202 6 TO OCXO R239 51 8 C211 .01 R211 51 Z203 C375 1.5-5pF L211 .9uH Z204 L213 .82uH C376 4.7pF 27 OSC IN R322 560 L225 .9uH PD 4 OUT R210 3.6k C225 C24 .01 .01 +6V 3 Vcc C230 .
L209 Z202 Z201 1 C209 6 4 3 L206 L205 C280 L204 U201 C208 CH201 C311 C277 C276 R295 C207 R206 L207 March 2000 Part No.
RX +12V R202 200 R203 200 + C336 4.7 C311 .001 C337 56pF RX +12V + C203 4.7 C204 33pF L204 L201 A201 RF IN L202 L203 L205 RF AMP C201 5.6pF L226 L221 C202 4.3pF C371 1.3pF MIXER C205 6.8pF R201 2.7k C208 33pF L228 L227 4 RF C372 1.3pF Q201 3636 5 U201 IF LRMS-2H 2 GND A C207 3pF R204 270 TO OCXO R239 51 8 C241 .1 R320 10k OSC IN V 27 WO 15 C370 27pF U205 MC145151DW2 PD OUT 4 28 LOCK DET HS LK RX 19 C324 100pF R219 100 R220 100 C293 .01 C211 .01 R211 51 C216 5.
4 U101 3 5 1 8 6 8 5 C251 R274 8 C269 + U122 7 1 14 11 10 L202 5 C305 R294 14 11 33 RV201 U124 U123 J106 U110 1 U118 53 1 C125 20 10 1 8 U109 74 9 16 2 J101 15 28 15 U127 U125 9 J105 75 54 21 WO102 14 1 1 40 15 + 32 11 20 U114 J212 14 1 84 83 10 11 U218 1 2 + C130 1 20 8 RV203 14 1 28 U105 C119 1 J211 C129 + 15 + C137 + C255 28 15 5 WO105 RV202 15 16 15 28 1 WO103 U107 29 30 + WO106 WO107 8 12 32 13 L201 4
14 1 C292 C257 C258 16 9 R265 R267 C243 + C245 C244 R266 + C242 R261 8 8 5 U214 1 4 R270 C113 U217 1 R263 9 U212 U211 R264 C290 + C287 16 8 9 C259 R279 1 16 R260 CR201 R227 C230 C246 R229 R257 1 7 C231 R258 R226 C300 C232 R228 R230 RT201 C302 R233 U207 CR202 C226 C247 CR204 8 C291 R220 R280 C106 C229 R278 R121 C101 R224 R234 R232 14 R259 4 8 + C233 R218 U205 1 5 R236 R231 R239 R238 5 R237 U206 8 1 R225 R223 C289 4 R277 C116 C228 C2
DETAIL B R287 R286 8 13 U120 U119 12 8 DETAIL C R231 CR201 8 1 C292 C257 C258 R280 C256 16 9 R267 C243 R265 C244 + C242 R266 R263 R261 8 8 5 U214 1 4 R270 C113 U217 1 March 2000 Part No.
MAIN MICROPROCESSOR DISPLAY DRIVER ALARM DISPLAY EPROM FLASH MEMORY 2 f 2 DS101 A0 3 g 3 A1 U101 48 A 5 DMARQ0 A2 14495L U105 1 e 4 A3 MPD70320L-5 51 B 6 DMAAK0 A4 15 dd 5 A5 52 C 9 7 4 14 9 13 A6 A7 h1 54 D 10 8 TC0 DMARQ1 A8 A9 cc 21 A0 12 A0 DQ0 22 A1 11 A1 DQ1 23 A2 10 A2 U3 DQ2 28F001BX BOARD TEST 59 2 +15V 1 WO 101 4 WO 102 14 WO 103 15 WO 104 12 GROUND 8 FSK AUDIO + 5 FSK AUDIO - 6 EA A12 A13 aa CL 1 A10 A11 3 10 NM1 R1
SOURCE +15V +9V 1 +15V 3 U201 1 F201 2A SOURCE SOURCE +15V +12V U221 8 78L12 C260 .01 + C268 .001 C262 15 + C269 1.5 + C270 4.7 + C276 .1 C275 15 + CR209 L201 U224 C113 .01 C114 .01 C115 .01 + C297 .01 C298 .01 C299 .01 C300 .01 -5V V OUT 5 C277 47 + R295 300k 2 C267 .01 C296 .01 C295 47 C278 .1 C279 47 + + C280 47 C281 .01 C282 .01 C283 .01 C284 .01 C285 .01 C286 .01 C302 .01 C303 .
U212C HIGH-PASS FILTER > 300 Hz C212 .022 C217 .022 11 C221 .022 LOW -PASS FILTER < 3 kHz J210 10 TP 9 DE-EMPHASIS NARROW BAND AUDIO ADJ C204 820pF J201 U201A 2 R201 29.4k R202 54.9k 2904 C207 68pF 1 C209 .22 C210 .033 R205 69.8k U201B U203A 2 2904 2904 7 1 5 + R209 15k C208 .033 R203 1M C214 .0047 R210 100 3 + C211 .068 3 + RX WB AUDIO 9 C218 .0068 C222 .022 C215 .047 C219 .068 R212 110 R214 110 C223 .01 R216 18.
DC INPUTS P913 C928 4 3 2 J909 DC ALARM 1 Y901 OCXO 1 R903 C902 U905 1 14 J911 AC ALARM 1 NC 2 3 R956 R955 R958 J910 ENABLE 1 R952 Q915 R951 R948 R946 R977 R972 R971 R968 R970 R969 1 R962 Q921 C938* DC FAIL DISABLE 2 3 R954 R953 R967 R966 R965 R964 DS905 AC FAIL DS906 R963 7 8 C914 R957 Q923 C925 Q924 7 8 U901 14 R919 R961 C915 NO C908 R959 R949 R950 CR906 Q902 R918 R917 C907 R876 R960 Q916 8 Q901 C937 2 3 1 R902 C904 8 C936 NC NO R901 C901
RF OUTPUT ALARM J901 7 RF ALARM OUT + J902 INPUT BNC 10 MHz FROM WWV WO 902 C901 150pF +5V +5V C902 .01 R903 270 4 5 R901 1k U901B 6 2 R902 10k 1 CR901 3 RF OUT OCXO 1 5 Y901 DC IN 10 MHz C925 .01 CASE GND 1 2 4 5 U901A 74HC00 U901D U904D 12 11 11 10 13 U902B 6 U906A 1 DS7830J 2 5 3 4 9 10 U901C L904 .39uH L905 1.2uH R975 51 C923 470pF C916 .01 L906 .
J101 230V AC 115V AC S101 2 1 1 3 AC INPUT 4 5 6 3 2 1 3 4 2 AC FUSE F101 3 U102 7 C103 + CR104 CR103 4 + C102 2 1 C110 C111 3 + C105 + C112 C109 + R102 R101 C107 8 + + C106 T101 C104 1 5 + CR102 6 CR101 C101 2 C108 CR105 WO101 WO102 AC SENSE +5V WO103 +15V WO104 GROUND S101 WO101 AC SENSE 115V J101 1 F101 1A 4 6 1 5 2 5 WO103 +15V OUT 3 6 2 4 3 2 7 + 230V AC POWER INPUT 2 3 10 8 C101 1000 + C102 6.8 C103 .
RECEIVER MULTIPLEXER MODULE (RMM) SECTION 4 RECEIVER MULTIPLEXER MODULE (RMM) 4.1 GENERAL 4.3 DATA PACKET The Receive Multiplexer Module (RMM), in the Remote Site, receives RSSI data from multiple RDMs and multiplexes the information onto a single line to be transmitted to a CDM at the Local Site. The RMM creates a Data Packet to be sent to the Central De-Multiplexer Module (CDM) at the Local Site. The RMM multiplexes the information received from a maximum of 10-RDMs.
RECEIVER MULTIPLEXER MODULE (RMM) 4.4 SWITCH SETTINGS Table 4-2 RMM SWITCH SETTINGS Switch Sect. S1 1 2 3 4 1-2 3-4 1 2 3 4 1 2 2 3 4 1 2 3 4 S2 S3 S4 S100 Description Off Not used on RMM Off Off Off On -RMM output (enabled) Off Off Not used on RMM Off Off Off Off - RMM Mux On - 1200 baud FSK (Normal) Off - 9600 baud RS-232 Off Not used on RMM Off Not used on RMM Off-Test, On-Normal Off-Test, On-Normal Off-Test, On-Normal Off-Test, On-Normal 4.
RECEIVER MULTIPLEXER MODULE (RMM) Figure 4-3 RMM ALIGNMENT POINTS DIAGRAM 4-3 March 2000 Part No.
RECEIVER MULTIPLEXER MODULE (RMM) SYMBOL NUMBER DESCRIPTION PART NUMBER SYMBOL NUMBER RECEIVER MULTIPLEXER MODULE PART NO. 023-3039-530 A 001 Rear connector assembly A 002 Drawer assembly C 001 C 002 C 003 C 004 C 005 C 006 C 007 C 008 C 009 C 010 C 011 C 012 C 013 C 014 C 015 C 016 C 017 C 018 C 019 C 020 C 021 C 022 C 023 C 024 C 025 C 026 C 027 C 028 C 029 C 030 C 031 C 032 C 033 C 034 C 035 C 036 C 037 C 038 C 039 C 040 C 041 .1 µF ±10% X7R 1210 .1 µF ±10% X7R 1210 1 µF 16V SMD tantalum .
RECEIVER MULTIPLEXER MODULE (RMM) SYMBOL NUMBER DESCRIPTION PART NUMBER EP002 3/32 heat shrink tubing EP003 3/32 heat shrink tubing EP004 3/32 heat shrink tubing 042-0241-552 042-0241-552 042-0241-552 F 001 534-0003-024 Fuse 2A AGC FH003 Fuse clip 534-1007-001 HW001 HW002 HW003 HW580 Nut 4-40 x .
RECEIVER MULTIPLEXER MODULE (RMM) SYMBOL NUMBER DESCRIPTION PART NUMBER R 101 R 102 R 104 R 105 R 106 R 107 R 108 R 109 10k ohm ±5% 1206 SMD 10k ohm ±5% 1206 SMD 10k ohm ±5% 1206 SMD 10k ohm ±5% 1206 SMD 10k ohm ±5% 1206 SMD 10k ohm ±5% 1206 SMD 300 ohm ±5% 1206 SMD 300 ohm ±5% 1206 SMD 569-0115-103 569-0115-103 569-0115-103 569-0115-103 569-0115-103 569-0115-103 569-0115-301 569-0115-301 S 001 S 002 S 003 S 004 S 005 S 100 DIP switch 4PST DIP switch 4PST DIP switch 4PST DIP switch 4PST Momentary SP
1 4 5 8 TP100 R28 S2 2 2 U3 1 3 U1 1 Z1 3 2 TP101 40 1 40 1 40 1 40 1 28 R27 1 40 1 3 1 C29 + 1 U10 Y2 U11 U14 Y3 U12 Y5 U13 Y4 Y6 Y1 U9 28 1 28 S5 8 53 1 5 F1 33 54 32 U16 4 U19 U2 U15 14 15 2 3 20 21 20 20 21 20 21 21 84 1 75 S5 16 1 U22 8 9 16 1 S5 8 1 5 4 U7 U8 8 16 1 9 8 9 16 1 S1 8 1 5 4 U6 8 9 1 S4 8 1 5 4 16 Y7 9 WO101 WO102 WO100 U5 8 14 12 74 15 14 15 11 + L6 C50 WO103 L1 8 5
+C43 8 C56 C57 + C48 + C49 C28 C52 C53 C12 C13 R34 U21 1 7 C19 C17 C15 C18 C16 C14 C10 C11 R35 R107 R106 R105 R104 R100 C21 C20 R37 R40 R39 C23 C22 C25 R14 R12 C32 8 14 C9 R15 R18 R17 R19 R16 R20 R6 14 C35 5 C7 1 U23 8 1 4 U20 C27 14 7 R38 R36 C44 + R25 R26 R24 C51 U24 8 + C55 1 7 R109 R108 R101 R102 1 R22 R21 U18 + C38 C31 C42 C41 C40 C33 C8+ 13 + C37 R9 R7 14 C26 R5 8 C39 + 24 R8 R23 U20 R2 R1 C6 + C1 C2 1 R10 R11 C5 + 7 C4 R1
A1 WO3 W602 22 WO5 W600 20 WO6 W599 19 18 17 W598 WO7 W597 WO8 W593 13 22 A2 23 A3 24 A4 25 A5 26 A6 27 A7 28 A8 29 A9 30 A10 31 A11 32 A12 33 A13 34 A14 35 A15 36 A16 37 A17 A18 R101 10k 1 5 2 6 D0 A1 D1 A2 D2 A3 D3 A4 D4 A5 D5 A6 D6 13 D0 14 D1 A0 1 15 D2 A1 3 16 D3 A2 5 17 D4 A3 6 18 D5 19 D6 R102 10k A19 38 39 40 72 73 A1 A7 D7 A1 20 W604 WO1 W603 WO2 W587 D1 A2 D2 A3 D3 R 2 10 W588 RDM7 8 7 3
March 2000 Part No.
CENTRAL DE-MULTIPLEXER MODULE (CDM) SECTION 5 CENTRAL DE-MULTIPLEXER MODULE (CDM) 5.1 GENERAL The CDM can only de-multiplex the Data Packet received from one RMM. The packet contains information for each of the 10 possible output lines. The information for the RSSI has the first 4-bits to define the line number and the second 4-bits to indicate the RSSI level, see Table 5-1.
CENTRAL DE-MULTIPLEXER MODULE (CDM) 5.4 SWITCH SETTINGS NOTE: CDM input goes in on CDM P1, pins 1 and 2 (right connector). Table 5-2 CDM SWITCH SETTINGS 5.5 ALIGNMENT SWITCH SEC. S1 1 2 3 4 1-2 3-4 1 2 3 4 1 2 2 3 4 1 2 3 4 S2 S3 S4 S100 DESCRIPTION NOTE: If the CDM is set for Digital Operation, alignment is not required.
CENTRAL DE-MULTIPLEXER MODULE (CDM) Figure 5-2 CDM ALIGNMENT POINTS DIAGRAM 5-3 March 2000 Part No.
CENTRAL DE-MULTIPLEXER MODULE (CDM) SYMBOL NUMBER DESCRIPTION PART NUMBER SYMBOL NUMBER CENTRAL DE-MULTIPLEXER MODULE PART NO. 023-3039-540 C 001 C 002 C 003 C 004 C 005 C 006 C 007 C 008 C 009 C 010 C 011 C 012 C 013 C 014 C 015 C 016 C 017 C 018 C 019 C 020 C 021 C 022 C 023 C 024 C 025 C 026 C 027 C 028 C 029 C 030 C 031 C 032 C 033 C 034 C 035 C 036 C 038 C 039 C 040 C 041 C 042 C 043 C 044 C 045 .1 µF X7R ±10% 1210 .1 µF X7R ±10% 1210 1 µF 16V SMD TANT .
CENTRAL DE-MULTIPLEXER MODULE (CDM) SYMBOL NUMBER R 013 R 014 R 015 R 016 R 017 R 018 R 019 R 020 R 021 R 022 R 023 R 024 R 025 R 026 R 027 R 028 R 034 R 035 R 036 R 037 R 038 R 039 R 040 R 100 R 101 R 102 R 104 R 105 R 106 R 107 R 108 R 109 S 001 S 002 S 003 S 004 S 005 S 100 DESCRIPTION 100k ohm ±5% 1206 SMD 910 ohm ±5% 1206 SMD 10k ohm ±5% 1206 SMD 10k ohm ±5% 1206 SMD 10k ohm ±5% 1206 SMD 10k ohm ±5% 1206 SMD 10k ohm ±5% 1206 SMD 10k ohm ±5% 1206 SMD 2.2k ohm ±5% 1206 SMD 2.
CENTRAL DE-MULTIPLEXER MODULE (CDM) March 2000 Part No.
N1 F4 F3 Z4 1 3 2 F2 F1 C44 + C58 + S2 1 4 Z2 TP100 R28 5 2 8 U1 1 2 Z1 3 2 TP101 1 C29 + 40 1 40 1 1 40 1 1 40 3 40 28 R27 1 1 3 1 28 1 28 U10 Y2 Y3 U11 U14 8 53 1 33 54 5 33 1 32 Y1 U12 Y4 Y6 U13 U9 Y5 S5 U16 4 U19 U2 14 15 20 20 21 21 20 21 20 21 20 21 12 74 75 84 1 14 15 14 15 11 S5 W101 CR1 ANL/DIG 16 1 16 1 16 1 W100 W102 U22 + C46 8 W103 3 5 1 8 4 9 U7 U8 8 9 8 9 16 1 S1 S5 CR2 OPER 5 1 8
C47 C2 C1 R1 R5 1 C4 7 + C5 + C39 8 U4 R23 R8 24 14 R3 R4 R7 R9 C26 C33 + C8 + C3 R13 13 C40 U16 C41 1 C42 C31 R22 C38 + R21 12 C30 + C6 R11 R10 R2 C36 C22 C32 C11 R12 C10 R14 C25 R20 R16 R19 R17 R18 R15 C23 C20 C21 C18 C16 C19 C15 R104 R105 R106 R107 C17 C14 C34 R100 C35 C24 R39 R40 R37 R35 7 1 U21 14 7 8 U24 1 C43+ 14 5 U20 1 4 C45 R27 R24 R26 R25 R36 R34 C13 1 C12 8 U23 C28 14 R38 8 8 C9 R6 C7 R102 R101 R108 R109 7 March 200
P1 9 10 11 12 A0 21 A1 22 A2 23 A3 24 A4 25 A5 26 A6 27 A0 D0 A1 D1 A2 D2 A3 D3 A4 D4 A5 D5 A6 D6 13 D0 14 D1 A0 1 15 D2 A1 3 16 D3 A2 5 17 D4 A3 6 18 D5 19 D6 A0 D0 A1 D1 A2 D2 A3 D3 24 U10 MC145406 D4 SCC2692 P1 2 RVM8 57 R D0 A0 1 16 D1 A1 3 24 D2 A2 5 17 D3 A3 6 23 D4 18 D5 28 30 A7 28 A8 29 A9 30 A7 D7 D7 20 A8 U2 A9 15 10 7 3 3 T 14 11 8 4 5 T 12 30 13 31 4 RVM7 59 R D0 A1 D1 A2
March 2000 Part No.
CHANNEL RECEIVER VOTER MODULE (cRVM) SECTION 6 CHANNEL RECEIVER VOTER MODULE (cRVM) 6.1 GENERAL The cRVM or RVMs can connect any one of the 4 possible audio’s it might be receiving to the Receive Audio path. The cRVM then can connect this Receive Audio path to the destination card. The Receive Audio path needs to be connected between the cRVM and RVMs. This path is connected by closing section 4 of the switch located on the backplane between the cards.
CHANNEL RECEIVER VOTER MODULE (cRVM) 6.4 RSSI 6.5.1 PRIORITY PROGRAMMING The RVM evaluates the RSSI levels from the different receiver Sites and selects the receiver with the best RSSI level. If the RVM is a Slave RVM (sRVM) it creates a Status Message and passes on the RDM with the best RSSI level. This message is sent to the Channel RVM (cRVM). A cRVM is capable of handling up to 7-sRVMs and the cRVM option is switch selectable (see 6-5).
CHANNEL RECEIVER VOTER MODULE (cRVM) 6.7 LED DEFINITION Table 6-1 cRVM OPERATION Switch Section The 4-pairs of Green and Yellow LEDs represent Sites 1 through 4 (see Table 6-4). The Green LED just below S4 is the power indicator LED. The two Yellow LEDs define whether the RVM is a cRVM or RVM (see Table 6-5). The bottom Green LED is the Call LED (see Table 6-6).
March 2000 Part No.
6-5 CR11 CR12 YEL CALL GRN S1 CR10 ON EEPOT SELECT (CS1 - CS6) DOWN UP PULSE EEPOT AUDIO LEVEL ADJUST S8 RESET YEL 1 2 3 4 S2 CR8 CR9 YEL CR6 CR7 GRN CR5 YEL CR4 GRN CR3 GRN YEL CR2 YEL +5V GRN SITE 4 SITE 3 SITE 2 SITE 1 CR1 2 14 8 1 U27 15 28 2 J2 1 TP2 TP3 TP5 TP1 BIT 9 BIT 8 cRVM ADDRESS (1-30) TP4 S3 DISABLED RVM RVM 1 RVM 2 RVM 3 RVM 4 RVM 5 RVM 6 RVM 7 ENABLED ON TP6 J4 1 2 J6 1 2 RVM ADDRESS (1-7) cRVM 8 7 6 5 4 3 2 1 OFF - 2400 BAUD LINK
CHANNEL RECEIVER VOTER MODULE (cRVM) 6.8 AUDIO ALIGNMENT 5. To increase the audio output level set S2, section 4 "Off". NOTE: This is a pre-installation procedure, intended for use in a "bench" alignment of an RVM. It is not intended for alignment of an operational voter system. 6. Adjust the audio output level by pressing S1 repeatedly until -25 dBm is measured. 6.8.1 RVM REMOVAL 6.8.4 CHANNEL 2 AUDIO OUTPUT LEVEL Remove all external connections to the RVM to be aligned (i.e.
CHANNEL RECEIVER VOTER MODULE (cRVM) 6.8.6 CHANNEL 4 AUDIO OUTPUT LEVEL NOTE: To engage Sites on RVM, on the SMM use Device Number of VDM connected to the shelf of the RVM. Use cRVM number (S5, 1-5) for channel number, RVM number is 0 (zero) if all are cRVMs. Remove the 1200 Hz tone from P1, pins 29 and 30. Connect the 1200 Hz tone to P1, pins 31 and 32. Remove the jumper from J3 and place it onto just one of the pins.
CHANNEL RECEIVER VOTER MODULE (cRVM) 1. Verify a -12 dBm audio level from the Receiver to the Voter. c. Set Parameters as follows: Display Entry/Encode Data = Encode Data Repeater/Mobile = Mobile Digital/Analog = Analog Normal/Inverted = Normal Encode/Decode = Encode Enter the data as: System Key UID HOME GID GOTO STA PRI R 2. If the measured level is incorrect the cRVM EEPOT must be adjusted (see Figure 6-5). 3. Set S2, sections 1 and 3 OFF, section 2 ON.
CHANNEL RECEIVER VOTER MODULE (cRVM) SYMBOL NUMBER PART NUMBER DESCRIPTION SYMBOL NUMBER RECEIVER VOTER MODULE PART NO. 023-3039-520 C 001 C 002 C 003 C 004 C 005 C 006 C 007 C 008 C 009 C 010 C 011 C 012 C 013 C 014 C 015 C 016 C 017 C 018 C 019 C 020 C 021 C 022 C 023 C 024 C 025 C 026 C 027 C 028 C 029 C 030 C 031 C 032 C 033 C 034 C 035 C 036 C 037 C 038 C 039 C 040 C 041 C 042 C 043 C 044 20 pF ±5% NPO 1206 .1 µF ±10% X7R 1210 .1 µF ±10% X7R 1210 .1 µF ±10% X7R 1210 .
CHANNEL RECEIVER VOTER MODULE (cRVM) SYMBOL NUMBER DESCRIPTION PART NUMBER SYMBOL NUMBER DESCRIPTION PART NUMBER C 093 C 094 C 095 C 096 C 097 C 098 C 099 C 100 C 101 C 102 C 103 C 104 C 105 C 106 C 107 C 108 C 109 C 110 C 111 C 112 C 113 C 114 C 115 C 116 C 117 C 118 C 119 C 120 C 121 C 122 C 123 C 124 C 125 C 126 2.2 µF 20V SMD TANT 10 µF 16V SMD TANT 2.2 µF 20V SMD TANT 10 µF 16V SMD TANT 2.2 µF 20V SMD TANT 10 µF 16V SMD TANT 10 µF 16V SMD TANT 2.2 µF 20V SMD TANT 2.2 µF 20V SMD TANT 2.
CHANNEL RECEIVER VOTER MODULE (cRVM) SYMBOL NUMBER R 003 R 004 R 005 R 006 R 007 R 008 R 009 R 010 R 011 R 012 R 013 R 014 R 015 R 016 R 017 R 018 R 019 R 020 R 021 R 022 R 023 R 024 R 025 R 026 R 027 R 028 R 029 R 030 R 031 R 032 R 033 R 034 R 035 R 036 R 037 R 038 R 039 R 040 R 041 R 042 R 043 R 044 R 045 R 046 R 047 R 048 R 049 DESCRIPTION 100k ohm ±5% 1206 SMD 100k ohm ±5% 1206 SMD 10k ohm ±5% 1206 SMD 620 ohm ±5% 1206 SMD 300 ohm ±5% 1206 SMD 10k ohm ±5% 1206 SMD 10k ohm ±5% 1206 SMD 300 ohm ±5% 12
CHANNEL RECEIVER VOTER MODULE (cRVM) SYMBOL NUMBER R 097 R 098 R 099 R 100 R 101 R 102 R 103 R 104 R 105 R 106 R 107 R 108 R 109 R 110 R 111 R 112 R 113 R 114 R 115 R 116 R 117 R 118 R 119 R 120 R 121 R 122 R 123 R 124 R 125 R 126 R 127 R 128 R 129 R 130 R 131 R 132 R 133 R 134 R 135 R 136 R 137 R 138 R 139 R 140 R 141 R 142 R 143 DESCRIPTION 10k ohm ±5% 1206 SMD 10k ohm ±5% 1206 SMD 10k ohm ±5% 1206 SMD 10k ohm ±5% 1206 SMD 10k ohm ±5% 1206 SMD 10k ohm ±5% 1206 SMD 10k ohm ±5% 1206 SMD 10k ohm ±5% 1206
CHANNEL RECEIVER VOTER MODULE (cRVM) SYMBOL NUMBER DESCRIPTION PART NUMBER TP005 Green tip jack TP006 Blue tip jack 105-2204-201 105-2210-201 U 001 U 002 U 003 U 004 U 005 U 006 U 007 U 008 U 009 U 010 U 011 U 012 U 013 U 014 U 015 U 018 U 019 U 020 U 021 U 023 U 024 U 025 U 026 U 027 U 028 U 029 U 030 U 031 U 032 U 033 U 034 U 035 U 036 U 037 U 038 U 039 U 040 U 041 U 042 U 043 U 044 U 045 U 046 U 047 544-5002-016 544-5002-116 023-9998-234 544-3766-154 544-2023-014 544-2023-014 544-3766-004 544-5001
CHANNEL RECEIVER VOTER MODULE (cRVM) March 2000 Part No.
1 40 8 7 6 5 4 3 2 1 1 J3 16 1 40 1 2 J6 J4 1 2 U23 U24 1 2 U31 9 8 Y1 9 8 Y4 Y3 C B E 16 1 U11 U10 2 Q1 40 16 1 ON J2 1 1 S5 40 U25 U26 Y2 1 9 8 S6 4 3 2 1 S3 16 1 ON CR13 8 7 6 5 4 3 2 1 ON 21 20 YEL YEL GRN YEL R133 CR2 R134 + CR3 + + + + YEL 28 1 1 11 28 24 12 75 U21 + C122 + + U8 R140 U1 10 33 1 11 +5V GRN ON 54 32 13 15 14 + R164 15 14 8 1 5 8 4 TP3 CR12 R143 + + 5 U41 S1 J5 1 8 1 4 16 1 TP2 TP1
8 7 14 1 14 March 2000 Part No.
+5V P1 A0 1 RS1 OP0 29 A0 21 A0 D0 13 D0 A0 1 RS1 D0 25 D0 A1 3 RS2 OP1 12 A1 22 A1 D1 14 D1 A1 3 RS2 D1 16 D1 A2 5 RS3 OP2 28 A2 23 A2 D2 15 D2 A2 5 RS3 D2 24 D2 A3 6 RS4 OP3 13 A3 24 A3 D3 16 D3 A3 6 RS4 D3 17 D3 30 TxD A OP4 27 A4 25 A4 D4 17 D4 30 TxD A D4 23 D4 D5 18 D5 D6 22 D6 U31 19 88C681 D7 D7 9 A5 10 P1 U5E 5 23 12 U5C P1 3 47 14 D5 18 D5 A6 27 A6 D6 19 D6 11 A7 28 A7 D7 20 D7 12 A8 29 A8 OP7 15 U39-7 (2) 18
+5V -5V C91 10 7 CS U31-15 (1) R2 10k + R7 300 6 VL R9 10k U46B 3403 7 C92 10 + R10 300 R8 10k - 6 U34C 3403 8 C2 .1 12 U31-14 (1) 2 U31-27 (1) U39 U / D EEPOT 5 V W - 9 INC 1 8 TC R176 620 + 10 + 5 +5V 1 +5V 11 R16 10k 8 26 11 16 R11 300 4 9 Q13 (1) 1 C89 2.2 U31-14 (1) 1 INC U31-27 (1) 2 U/D R15 10k CS 7 3 V H 3 + BRTS RESET 18 MC1 TP2 CAP1 3 5 RC +12V U31-10 (1) VW 5 13 - C5 .0022 R18 910 +5V 16 R52 100k C100 2.
VOTER DIAGNOSTIC MODULE (VDM) SECTION 7 VOTER DIAGNOSTIC MODULE (VDM) 7.1 DESCRIPTION The VDM communicates with the Voter System at 1200 baud. The VDM polls the Voter System every 2-seconds for data or alarms. The Voter Diagnostics Module (VDM), in the Switch, is the data communication buffer between the SMM and the Voting System. The type of data exchanges between the Voting System and the VDM pertains to: Memory Read of the voters; Receiver Site Enable/Disable; and Alarm/Control Information.
VOTER DIAGNOSTIC MODULE (VDM) Figure 7-3 VDM BLOCK DIAGRAM March 2000 Part No.
VOTER DIAGNOSTIC MODULE (VDM) Table 7-2 VDM JUMPER PLACEMENT 7.2 VDM SETUP PROCEDURE 7.2.1 SWITCH SETTINGS JU Table 7-1 VDM SWITCH SETTINGS Sec Description S1 1 2 3 4 On = AFSK Data Receive Secondary Line Enabled On = AFSK Data Receive Main Audio Input Enabled On = Voice from main board Enabled On = AFSK Data Receive from PCM Enabled S2 S3 7.2.3 VDM BACKPLANE EXTERNAL CONNECTIONS Refer to Section 7 for pinouts on the shelf backplane and wire harness pinouts.
VOTER DIAGNOSTIC MODULE (VDM) Figure 7-4 VDM ALIGNMENT POINTS DIAGRAM March 2000 Part No.
VOTER DIAGNOSTIC MODULE (VDM) SYMBOL NUMBER DESCRIPTION PART NUMBER SYMBOL NUMBER VOTER DIAGNOSTIC MODULE PART NO. 023-3039-570 A 001 Basic board module C 001 C 002 C 003 C 004 C 006 C 007 C 009 C 010 C 011 C 012 C 013 C 014 C 015 C 016 C 017 C 018 C 019 C 020 C 021 C 022 C 023 C 024 C 025 C 026 C 027 C 028 C 030 C 031 C 032 C 033 C 034 C 035 C 036 C 037 C 038 C 041 C 045 C 046 C 047 C 048 C 049 C 051 .01 µF ±10% X7R 50V chip .01 µF ±10% X7R 50V chip .01 µF ±10% X7R 50V chip 10 pF ±5% NPO 50V 1206 4.
VOTER DIAGNOSTIC MODULE (VDM) SYMBOL NUMBER CR003 CR004 CR011 CR401 CR402 CR403 CR404 DESCRIPTION Si diode 1N4448 Si diode 1N4448 6.2V ±5% 1W zener LED green LED red LED yellow LED green PART NUMBER 523-1500-883 523-1500-883 523-2503-629 549-4001-122 549-4001-120 549-4001-121 549-4001-122 DS001 7-segment display green 549-4002-020 EP001 Crystal pin insulator EP002 Crystal pin insulator EP003 Insulator, TO-220 018-1080-001 018-1080-001 018-1132-007 F 001 1A hirel pigtail F 002 .
VOTER DIAGNOSTIC MODULE (VDM) SYMBOL NUMBER R 040 R 041 R 042 R 043 R 044 R 045 R 046 R 047 R 048 R 049 R 050 R 051 R 053 R 054 R 057 R 058 R 059 R 060 R 061 R 063 R 064 R 065 R 066 R 067 R 068 R 069 R 070 R 071 R 081 R 082 R 083 R 084 R 085 R 086 R 087 R 088 R 089 R 090 R 091 R 092 R 093 R 094 R 095 R 096 R 097 R 098 R 099 DESCRIPTION 3.3k ohm ±5% 1/8W chip 100k ohm ±5% 1/8W chip 3.3k ohm ±5% 1/8W chip 3.3k ohm ±5% 1/8W chip 100k ohm 20 turn trim pot 10k ohm ±5% 1/8W chip 10k ohm ±5% 1/8W chip 3.
VOTER DIAGNOSTIC MODULE (VDM) SYMBOL NUMBER DESCRIPTION PART NUMBER 10k ohm ±5% 1/8W chip 10k ohm ±5% 1/8W chip 10k ohm ±5% 1/8W chip 10k ohm ±5% 1/8W chip 10k ohm ±5% 1/8W chip 10k ohm ±5% 1/8W chip 10k ohm ±5% 1/8W chip 10M ohm ±5% 1/8W chip 620 ohm ±5% 1/8W chip 100k ohm ±5% 1/8W chip 100k ohm ±5% 1/8W chip 10k ohm ±5% 1/8W chip 10k ohm ±5% 1/8W chip 10k ohm ±5% 1/8W chip 10k ohm ±5% 1/8W chip 569-0115-103 569-0115-103 569-0115-103 569-0115-103 569-0115-103 569-0115-103 569-0115-103 569-0115-106 569
J31 S2 1110 9 8 7 6 5 4 3 2 1 R70 40 1 28 1 RN1 32 33 12 14 15 U7 1 1 84 Y1 16 U18 DS1 J13 1 Y2 15 U6 11 14 14 Y3 7 20 21 CR11 CR401 CR403 CR402 CR404 8 U11 U46 U10 RN2 R71 28 1 75 53 54 74 Z3 9 8 2 J12 1 J11 + + C69 C68 R44 CR3 CR4 2 1 2 Q19 S5 Q20 D G S 1 2 3 4 D G S 5 K2 6 3 4 R83 TP3 2 1 2 U43 R86 TP4 + 9 J27 + + 2 1 2 1 J14 R90 C88 C87 TP9 J15 3 2 1 4 3 2 1 4 3 2 1 S4 4 3 2 1 P1 U59 Y4 1 S1 1 J38 1 2 3 7-9 + 16
March 2000 Part No.
+5V R118 22k P1 R117 22k R119 22k 3 2 1 2 4 1 +5V RN1 22k 11 3 4 5 6 7 8 9 10 LE 9 33 8 34 CARD ADDRESS 7 35 D7 Q0 D6 Q1 U13 D5 Q2 74HC573 MICROPROCESSOR 19 D0 18 D1 8 4 70 17 D2 7 3 69 16 D3 6 2 68 15 D4 5 1 14 D5 13 D6 12 1 S5 PT3 R/W PT2 A0 PT1 A1 PT0 A2 MREQ A3 D0 A4 83 RAM EPROM 21 A0 22 A1 23 A2 A0 10 24 A3 A1 9 25 A4 A2 8 26 A5 A3 7 27 A6 A4 6 28 A7 A5 5 29 A8 A6 4 20 CS1 6 36 5 37 4 38 3 D4
+5V U7-51 (1) TxPPC U21A 74HC00 6 P1 7 TX PCM PRIMARY 18 11 9 8 12 74HC04 2 1 U20C 10 U25A/B 17 FSX 11 12 55121 16 13 U7-48 (1) Tx PSC 10 +5V 9 U20A 74HC08 TS/D CLK DX U19 VFXI - 3 15 22 U20B 6 2 5 +5V DX GSX 13 11 5 1 4 +5V 12 15 23 11 +5V RC0 14 15 6 3 U20D 4 TP5 29C14 R31 10k U36B 10 9 8 2 3 4 5 U36A R125 2.
BACKPLANE SECTION 8 BACKPLANE 8.1 DESCRIPTION 8.3 SWITCH SETTINGS The Multi-Net Voter shelf backplane contains slots for RVMs and CDMs. The slot defines the module’s address. The backplane provides for cRVM to RVM Bus loading and distributes: S1 through S13 Section 1 On = cRVM/RVM common audio enabled. Section 2 On = cRVM to RVM bus connection enabled. Section 3 On = Load resistor for cRVM to RVM bus* enabled. Section 4 Not Used. 1. Power. 2. Voter Diagnostics Bus. 3. cRVM to RVM Bus. 4.
BACKPLANE SYMBOL NUMBER PART NUMBER DESCRIPTION SYMBOL NUMBER VOTER SHELF BACKPLANE PART NO. 023-3039-550 A 001 A 002 A 003 A 004 Backplane 19" 13 card rack Voter shelf wiring kit Card rack mounting strip 19" P 026 P 027 P 028 P 029 P 030 P 031 P 032 P 033 P 034 P 035 P 036 P 037 P 038 P 039 P 040 023-3039-551 585-0918-012 023-3039-552 585-3039-013 EP001 Plug contact .
BACKPLANE SYMBOL NUMBER PART NUMBER DESCRIPTION U 001 U 002 U 003 U 004 Dual line driver 55121 Triple line receiver MC3447 Driver/Receiver RS-232C/V Hex inverter 74HC04 544-2023-002 544-2023-003 544-2023-014 544-3764-004 X 001 X 002 X 003 X 004 16-pin IC socket 16-pin IC socket 16-pin IC socket 14-pin IC socket 515-5008-013 515-5008-013 515-5008-013 515-5008-012 VOTER SHELF WIRING KIT PART NO.
BACKPLANE RVM P15 P14 J1 J1 N/C TxD1 1 1 53 21 1 1 MLM AUDIO+ N/C GND 2 2 54 22 2 2 MLM AUDIO- N/C RxD1 3 3 55 23 3 3 MLM TX DATA+ N/C GND CDM1+ 4 4 56 24 4 4 MLM TX DATA- 5 1 57 25 5 1 RDM1- CDM1- 6 2 58 26 6 2 RDM1+ CDM2+ RDM2- 7 3 59 27 7 3 CDM2- 8 4 60 28 8 4 RDM2+ CDM3+ 9 5 61 29 9 5 RDM3- CDM3- 10 6 62 30 10 6 RDM3+ 11 7 RDM4- 12 8 RDM4+ P1 CDM4+ 11 7 63 31 CDM4- 12 8 P1 64 32 CDM P15 P14 J1 J1 1 1
RVM 1 023-3039-520 BACKPLANE 023-3039-550 CR8000/8900 RRB 023-3039-320 SUMMIT J2, PIN 17 AUDIO TO RPTR 1 1 21 cRVM AUDIO + OUT P603, PIN 2 J2, PIN 21 GROUND 2 2 22 cRVM AUDIO - P603, PIN 1 J2, PIN 19 DATA TO RPTR 3 3 23 TX DATA + OUT GROUND 4 4 24 TX DATA - 1 5 25 RDM 1 - 2 6 26 RDM 1 + RDM 1 023-3039-580 P1 P1 P603, PIN 10 3 7 27 RDM 2 - 1 4 8 28 RDM 2 + 2 5 9 29 RDM 3 - TX SEC RS-232 (RMM) WO2 3 6 10 30 RDM 3 + (BOARD TEST) WO 7 4 7 11 31 RDM
J1 J2 P40 1 2 3 4 GND TxD RxD 9 16 9 16 U2 U1 1 8 16 9 1 8 8 14 U3 U4 1 8 7 1 P13 P12 P11 P10 P9 P8 P7 P6 P5 P4 P3 P2 33 1 33 1 33 1 33 1 33 1 33 1 33 1 33 1 33 1 33 1 33 1 33 1 P1 WO100 WO101 33 1 WO102 WO103 WO104 WO105 WO106 P38 P37 64 32 P36 P35 P33 P32 P31 P29 P28 P27 P25 P24 March 2000 Part No.
P13 J1 1 P2 P1 33 1 33 2 1 33 1 34 2 34 2 34 2 35 3 35 3 35 3 36 4 36 4 36 4 37 5 37 5 37 5 38 6 38 6 38 6 39 7 39 7 39 7 40 8 40 8 40 8 41 9 41 9 41 9 42 10 42 10 42 10 43 11 43 11 43 11 44 12 44 12 44 12 45 13 45 13 45 13 46 14 46 14 46 14 +5V +5V +5V +5V W100 W101 +5V +5V +5V 2 3 +12V +12V +12V +12V W102 +12V J2 +12V 4 1 3 5 -12V -12V -12V -12V W103 -12V -12V 6 5 7 7 8 W104 8 9 W105 9
March 2000 Part No.
POWER SUPPLIES SECTION 9 POWER SUPPLIES 9.1 RECEIVER SITE POWER SUPPLY (-490) 9.5 POWER CONSUMPTION The -490 Receiver Site Power Supply has a 110V AC 50/60 Hz, 5A maximum input and 10 separate 13.8V DC/ground output connections. The voltage, current and power for each supply voltage per card is shown in Table 9-1. Table 9-1 POWER CONSUMPTION 9.2 RECEIVER SITE REDUNDANT KIT (-495) The -495 Receiver Site Redundant Supply Kit allows two power supplies to share the load.
POWER SUPPLIES 5. Remove the AC voltage to the adjusted supply and connect AC voltage to the other power supply. Table 9-2 POWER SUPPLY CONNECTIONS TB1 Term 1 Term 2 Term 3 Wire No. Colo r 6. Connect a voltmeter to U1, pin 76 on an RVM (DO NOT use an extender card). From W1 W1 W1 Blk Wht Grn AC (Hot) AC (Ntrl) AC (Gnd) Line Line Line W1 W2 W6 NC W7 W4 W5 W3 W8 Red Red Blu +5V +5V Gnd F1 F1 Gnd 8. Connect a voltmeter to output of CR3 and verify that the -5V line is -4.8V to -5.2V.
POWER SUPPLIES SYMBOL NUMBER DESCRIPTION PART NUMBER SYMBOL NUMBER RECEIVER SITE POWER SUPPLY PART NO. 023-3039-490 A 002 Challenger power supply 023-0226-141 HW001 #4 shakeproof washer HW003 4-40 panhead philips ZPS HW004 Self clinching fastener HW005 6-32 panhead philips ZPS HW006 6 x .018 lockwasher NPB 596-1104-008 575-1604-008 537-9047-002 575-1606-009 596-2106-009 F 001 10A 32V fastblow AGC 534-0003-036 HW004 HW005 HW006 HW007 PART NUMBER DESCRIPTION 4-40 pan head ZPS philips No.
POWER SUPPLIES SYMBOL NUMBER J 002 DESCRIPTION 22 AWG 4 cond connector PART NUMBER SYMBOL NUMBER 515-9031-233 MP002 Card rack panel number MP003 Shelf MP004 Fan finger guard 2.36" 014-0783-099 017-2222-215 578-1000-010 W 001 8 ft.
POWER SUPPLIES SYMBOL NUMBER W 006 W 007 W 011 W 012 W 013 W 014 W 015 W 016 W 017 DESCRIPTION 18 AWG prebonded 18 AWG prebonded 12 AWG stranded red 12 AWG stranded red 12 AWG stranded blue 12 AWG stranded blue 18 AWG prebonded 18 AWG prebonded 18 AWG prebonded PART NUMBER 597-7031-809 597-7031-809 597-7021-202 597-7021-202 597-7021-206 597-7021-206 597-7031-809 597-7031-809 597-7031-809 9-5 March 2000 Part No.
POWER SUPPLIES FH1 J1 F1 GROUND 10 +13.8V 10 1 J2 1 J2 P1 P2 Figure 9-1 RECEIVER SITE POWER SUPPLY COMPONENT LAYOUT SECONDARY CHALLENGER POWER SUPPLY + 470 470 PRIMARY CHALLENGER POWER SUPPLY + - FH1 SCRATCH OFF SOLDER MASK AND SOLDER HERE AFTER MOUNTING WITH HARDWARE F1 GROUND 10 J2 P2 +13.8V 1 TB2 10 J2 TB1 P1 1 Figure 9-2 RECEIVER SITE REDUNDANT KIT March 2000 Part No.
POWER SUPPLIES TB1 1 2 3 4 P1 +13.8V 5 6 7 8 F1 10A J1 9 + 10 TB2 - 1 2 3 4 5 P2 GND 6 7 8 9 10 Figure 9-3 RECEIVER SITE POWER SUPPLY SCHEMATIC TB1 1 2 SECONDARY CHALLENGER POWER SUPPLY - 3 4 5 + P1 +13.8V 6 7 F1 10A 8 9 10 TB2 R3 470 R2 470 1 2 3 4 CR3 GRN SEC FRONT PANEL PS INDICATORS CR2 GRN PRIMARY 5 + 6 - P2 GND 7 PRIMARY CHALLENGER POWER SUPPLY 8 9 10 Figure 9-4 RECEIVER SITE REDUNDANT KIT SCHEMATIC 9-7 March 2000 Part No.
March 2000 Part No.
POWER SUPPLIES TB4 TB2 +5V 1 WO 1 W1 F1 5A 1 +5V 2 +5V 3 -5V 4 +12V 5 -12V RED +5V 2 + C1 10000 WO 2 W2 R1 220 RED WO 9 W9 RED CR1 6 -5V 8 WO 3 W3 F2 5A 7 GRN R2 220 8 WO 10 9 W10 GRN CR2 +12V 6 WO 4 W4 10 F3 5A TB3 LT BLU 10 +5V 9 +5V 8 -5V 7 +12V 6 -12V R3 560 WO 11 W11 LT BLU 4 CR3 F4 5A -12V 7 W5 WO 5 WHT R4 560 W6 BLU WO 6 3 5 W7 BLU WO 7 5 WO 12 W12 WHT 4 CR4 W8 WO 8 WO 13 3 9 BLU W13 BLK NOTES: 2 ALL RESISTORS ARE IN OHMS AND
POWER SUPPLIES W13 (BLU) SUPPLY B W14 (BLU) SUPPLY A W3 (BLU) W4 (BLU) W1 (RED)+5 W11 (RED) W12 (RED) W15 (GRN) W2 (RED)+5 W16 (BLU) W5 (GRN)-5 W6 (BLU)+12 W7 (WHT)-12 W17 (WHT) +5V A SUPPLY A +5V CR2 +5V CR3 -5V CR4 +12V CR5 -12V +5V A +5V (RED) +5V (RED) CR1 +5V B -5V (GRN) +12V (BLU) -12V (WHT) +5V B W2 W1 W5 W6 W7 -5V A -5V B CR1 CR2 CR3 W12 W11 CR4 W15 CR5 +12V A W17 W16 +12V B +5V (RED) +5V (RED) -5V (GRN) +12V (BLU) -12V (WHT) -12V A -12V B SUPPLY B
POWER SUPPLIES 9.8 VOTER SHELF POWER SUPPLY (-501) The wattage required by the power supply is found by dividing the total wattage of the Voter by the efficiency (0.7) of the power supply. The -501 Voter Shelf Power Supply has a 90264V AC 47-63 Hz input and 4 sets of 4 continuous duty outputs as follows: Voter Power ÷ 0.7 = Wattage of the Power Supply +5V DC 15A. -5V DC 2A. +12V DC 2A. -12V DC 2A. The BTUs per hour are found by multiplying a known value (3.6) by the wattage of the power supply.
POWER SUPPLIES SYMBOL NUMBER PART NUMBER DESCRIPTION SYMBOL NUMBER VOTER POWER SUPPLY PART NO.
POWER SUPPLIES SYMBOL NUMBER DESCRIPTION PART NUMBER CR035 CR036 CR037 CR038 CR043 CR044 CR045 CR046 CR047 CR048 CR049 CR050 Switching diode SOT-23 Switching diode SOT-23 Switching diode SOT-23 Switching diode SOT-23 Switching diode SOT-23 Switching diode SOT-23 Switching diode SOT-23 Switching diode SOT-23 Switching diode SOT-23 Switching diode SOT-23 Switching diode SOT-23 Switching diode SOT-23 523-1504-002 523-1504-002 523-1504-002 523-1504-002 523-1504-002 523-1504-002 523-1504-002 523-1504-002 5
POWER SUPPLIES SYMBOL NUMBER R 013 R 014 R 015 R 016 R 017 R 018 R 019 R 020 R 021 R 022 R 023 R 024 R 025 R 026 R 027 R 028 R 029 R 030 R 031 R 032 R 035 R 036 R 037 R 038 R 039 R 040 R 041 R 042 R 059 R 060 R 061 R 062 R 063 R 064 R 065 R 066 R 067 R 068 R 069 R 070 R 071 R 072 R 073 R 074 R 077 R 078 R 079 DESCRIPTION 150 ohm ±5% 1206 SMD 150 ohm ±5% 1206 SMD 150 ohm ±5% 1206 SMD 150 ohm ±5% 1206 SMD 150 ohm ±5% 1206 SMD 150 ohm ±5% 1206 SMD 150 ohm ±5% 1206 SMD 150 ohm ±5% 1206 SMD 150 ohm ±5% 1206
POWER SUPPLIES PIN COLOR DESCRIPTION TO POWER SUPPLY LOCATION 1 +5V SENSE* RED A A 2 GRN/YEL GROUND EP1 EP1** BACK PANEL 3 GROUND BLK EP1 EP1 BACK PANEL 4 -5V GRN EP53 EP52 FUSE BOARD 5 GROUND BLK EP1 EP1 BACK PANEL 6 -12V WHT EP55 EP54 FUSE BOARD 8 NC DK BLU 9 +5V ORN ADJ POT PIN 1 ADJ POT PIN 1 BACK PANEL 10 RED +5V ADJ POT PIN 2 ADJ POT PIN 2 BACK PANEL 11 BLU +5V ADJ POT PIN 3 ADJ POT PIN 3 BACK PANEL 23 WHT AC NEUTRAL AC IN SOCKET AC IN SOCKET BACK PANEL 24 BLK AC LOAD AC IN SWITCH AC IN SWITCH BACK P
POWER SUPPLIES PIN 1 3 4 6 7 8 10 11 COLOR RED BLK BLU BLK GRN RED WHT RED DESCRIPTION +5V SENSE* GROUND +12V OUT GROUND -5V OUT +5V OUT -12V OUT +5V OUT 1 EP1** EP43 EP1 EP36 EP17 EP32 EP18 TO SHELF 2 3 EP1 EP1 EP40 EP46 EP1 EP1 EP37 EP38 EP23 EP5 EP33 EP34 EP24 EP6 4 EP1 EP49 EP1 EP39 EP11 EP35 EP12 LOCATION BACK PANEL BACK PANEL FUSE BOARD BACK PANEL FUSE BOARD FUSE BOARD FUSE BOARD FUSE BOARD *SHELF #1 ONLY **GROUND BAR 10 7 4 1 11 8 5 2 12 9 6 3 023-3039-985 REDUNDANT PS CABLE IN R
12 VDC EF Johnson OUTPUT 1 OUTPUTS 2 OUTPUTS 4 OUTPUTS 3 AUX. OUTPUTS +5 +12 -5 -12 +5 +12 -5 -12 +5 +12 -5 -12 +5 +12 -5 -12 +12 +12 +12 +12 15 2 2 2 15 2 2 2 15 2 2 2 15 2 2 2 2 2 2 2 OUTPUT 4 A B OUTPUT 2 + - + - SUPPLY A 5V ADJUST 90-264 VAC 47-63 Hz + - OUTPUT 1 SUPPLY B GND B 5V TEST A 90-264 VAC 47-63 Hz -500 POWER SUPPLY REAR VIEW FIGURE 9-12 -500 POWER SUPPLY FRONT VIEW FIGURE 9-11 9-17 OUTPUT 3 + - March 2000 Part No.
J3 +5V SENSE J1 EP1 POWER SUPPLY A 585-4001-607 1-SHELF P1 GND A GND B GND C +5V OUT D EP20 +5V IN +5V OUT E EP21 +5V IN +5V OUT F EP15 GND G +12V OUT H P1 J1 1 FUSE BOARD 023-3039-502 +5V SENSE 3 GROUND 4 +12V +12V OUT (1) EP43 6 GROUND +5V IN -5V OUT (1) EP36 7 -5V EP14 +5V IN +5V OUT (1) EP17 8 +5V EP61 +12V IN -12V OUT (1) EP32 10 -12V +5V OUT (1) EP18 11 +5V P1 +5V SENSE 1 GROUND EP65 GND 2 GROUND EP64 GND 3 GROUND EP63 -5V OUT 4 G
EP65 EP28 EP27 EP61 EP26 EP25 EP35 EP55 9-19 EP39 EP49 EP11 EP34 EP64 EP38 EP63 EP46 EP62 EP5 EP33 EP37 EP40 EP23 EP12 EP6 EP8 EP2 EP52 EP20 EP9 EP3 EP53 EP21 March 2000 Part No.
GROUND +5V IN (B) -12V IN (A) EP21 +5V IN (B) EP53 -5V IN (B) +12V AUX (1) +12V AUX (2) +12V AUX (3) +12V AUX (4) EP25 EP26 EP27 EP28 3 1 3 3 1 EP61 -12V IN (A) +5V IN (B) EP9 March 2000 Part No.
EP65 2 EP14 +5V IN EP63 EP64 1 2 1 2 EP62 1 2 EP60 1 +12V IN F1 15A 1 +12V IN EP17 1 +12V IN 2 2 EP53 1 F17 2A 1 2 2 1 5 R7 150 R8 150 R9 150 R31 240 4N35 6 4N35 2 2 1 5 R5 150 +5V OUT (2) R94 330 1 1 4N35 IN CR3 BLUE R29 240 6 +5V IN 1 2 2 1 5 2 1 R91 330 1 +5V SENSE 1 2 2 1 5 IN CR18 AMBER CR48 4 F6 2A EP37 1 EP40 1 -5V OUT (2) R17 150 U18 4N35 IN 6 2 R18 150 R67 240 U21 4N35 IN CR14 AMBER 1 CR36 R62 240 +12V 5 +12V OUT (2)
March 2000 Part No.
RECEIVER REVERT BOARD (RRB) SECTION 10 RECEIVER REVERT BOARD (RRB) 10.1 GENERAL Install the RRB into the RDM by plugging the wire harness onto the RRB board. The revert feature is enabled or disabled by RDM S1, section 6. Set S1, section 6 "Off" to enable the revert feature. The Receiver Revert Board (RRB) is designed for either operation with the 800 MHz or 900 MHz receivers.
RECEIVER REVERT BOARD (RRB) 10.4 SWITCH SETTINGS 10.5 ALIGNMENT Table 10-1 BAUD SWITCH SETTINGS Module Switch-Section RVM S5- sec 6 RDM S1- sec 5 MLM S3- sec 6 Normal Link (9600 baud) ON ON OFF 1. With the RVM installed, bring up the channel. Connect a transmission test set to J1, pin 11 on the RRB and record the audio level from the RVM. __________ Remote Link (2400 baud) OFF OFF ON 2. With the RVM removed, bring up the channel.
RECEIVER REVERT BOARD (RRB) SYMBOL NUMBER PART NUMBER DESCRIPTION SYMBOL NUMBER RECEIVER REVERT BOARD (RRB) PART NO.
RECEIVER REVERT BOARD (RRB) Figure 10-3 RECEIVER REVERT BOARD (COMP SIDE) March 2000 Part No.
RECEIVER REVERT BOARD (RRB) Figure 10-4 RECEIVER REVERT SCHEMATIC 10-5 March 2000 Part No.
RECEIVER REVERT BOARD (RRB) Figure 10-5 RRB INSTALLATION March 2000 Part No.
8000 RECEIVER CHANNEL FREQUENCY CHART APPENDIX A 8000 RECEIVER CHANNEL FREQUENCY CHART NOTE: ON = 1 Channel Number FCC Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 OFF = 0 LSB RDM MSB Receive S2 S6 Frequency 10 9 8 7 6 5 4 3 2 0 LSB S7 0 2 3 4 RVM MSB S5 0 2 3 4 7 8 806.0125 806.0375 806.0625 806.0875 806.
8000 RECEIVER CHANNEL FREQUENCY CHART Channel Number FCC Number 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 March 2000 Part No. 001-3139-502 NOTE: ON = 1, OFF = 0 LSB RDM MSB LSB Receive S2 S6 S7 Frequency 10 9 8 7 6 5 4 3 2 1 1 2 3 4 RVM MSB S5 1 2 3 4 7 8 807.
8000 RECEIVER CHANNEL FREQUENCY CHART Channel Number FCC Number 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 111 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 110 111 112 113 114 115 116 117 118 119 130 131 132 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 111 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 110 111 112 113 114 115 116 117 118 119 130 131 132 NOTE: ON = 1, OFF = 0 LSB RDM MSB LSB Receive S2 S6 S7 Frequency 10 9 8 7 6 5 4 3 2 1 1 2 3 4 RVM M
8000 RECEIVER CHANNEL FREQUENCY CHART Channel Number FCC Number 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 064 165 166 167 168 169 170 171 172 173 174 175 176 177 178 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 March 2000 Part No.
8000 RECEIVER CHANNEL FREQUENCY CHART Channel Number FCC Number 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 NOTE: ON = 1, OFF = 0 LSB RDM MSB LSB Receive S2 S6 S7 Frequency 10 9 8 7 6
8000 RECEIVER CHANNEL FREQUENCY CHART Channel Number FCC Number 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 March 2000 Part No.
8000 RECEIVER CHANNEL FREQUENCY CHART Channel Number FCC Number 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 311 310 312 313 314 315 316 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 311 310 312 313 314 315 316 NOTE: ON = 1, OFF = 0 LSB RDM MSB LSB Receive S2 S6 S7 Frequency 10 9 8 7 6
8000 RECEIVER CHANNEL FREQUENCY CHART Channel Number FCC Number 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 March 2000 Part No.
8000 RECEIVER CHANNEL FREQUENCY CHART Channel Number FCC Number 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 NOTE: ON = 1, OFF = 0 LSB RDM MSB LSB Receive S2 S6 S7 Frequency 10 9 8 7 6
8000 RECEIVER CHANNEL FREQUENCY CHART Channel Number FCC Number 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 March 2000 Part No.
8000 RECEIVER CHANNEL FREQUENCY CHART Channel Number FCC Number 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 NOTE: ON = 1, OFF = 0 LSB RDM MSB LSB Receive S2 S6 S7 Frequency 10 9 8 7 6
8000 RECEIVER CHANNEL FREQUENCY CHART Channel Number FCC Number 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 March 2000 Part No.
8000 RECEIVER CHANNEL FREQUENCY CHART Channel Number 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 FCC Number 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 NOTE: ON = 1, OFF = 0 LSB RDM MSB LSB Receive S2 S6 S7 Frequency 10 9 8 7 6 5
8000 RECEIVER CHANNEL FREQUENCY CHART Channel Number FCC Number 593 594 595 596 597 598 599 600 601 601 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 March 2000 Part No.
8000 RECEIVER CHANNEL FREQUENCY CHART Channel Number FCC Number 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 NOTE: ON = 1, OFF = 0 LSB RDM MSB LSB Receive S2 S6 S7 Frequency 10 9 8 7 6 5 4 3 2 1 1 2 3
8000 RECEIVER CHANNEL FREQUENCY CHART Channel Number FCC Number 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 711 710 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 711 710 712 713 714 715 716 717 718 719 720 721 722 March 2000 Part No.
8000 RECEIVER CHANNEL FREQUENCY CHART Channel Number FCC Number 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 NOTE: ON = 1, OFF = 0 LSB RDM MSB LSB Receive S2 S6 S7 Frequency 10 9 8 7 6 5 4 3 2
8000 RECEIVER CHANNEL FREQUENCY CHART Channel Number FCC Number Receive Frequency NOTE: ON = 1, OFF = 0 RDM MSB LSB RVM S2 S6 S7 10 9 8 7 6 5 4 3 2 1 1 2 3 4 1 2 3 4 7 8 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 816 817 818 819 810 811 812 813 814 815 816 817 818 819 820 821 822 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804
8000 RECEIVER CHANNEL FREQUENCY CHART Channel Number FCC Number 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 - NOTE: ON = 1, OFF = 0 LSB RDM MSB LSB Receive S2 S6 S7 Frequency 10 9 8 7 6 5 4 3 2 0 0 2 3 4 823.7750 823.7875 823.8000 823.8125 823.8250 823.8375 823.8500 823.8625 823.8750 823.
8000 RECEIVER CHANNEL FREQUENCY CHART Channel Number FCC Number 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 - March 2000 Part No. 001-3139-502 NOTE: ON = 1, OFF = 0 LSB RDM MSB LSB Receive S2 S6 S7 Frequency 10 9 8 7 6 5 4 3 2 1 1 2 3 4 RVM MSB S5 1 2 3 4 7 8 824.3500 824.3625 824.3750 824.3875 824.4000 824.4125 824.4250 824.4375 824.4500 824.4625 824.
8000 RECEIVER CHANNEL FREQUENCY CHART Channel Number FCC Number 915 916 917 918 919 920 - NOTE: ON = 1, OFF = 0 LSB RDM MSB LSB Receive S2 S6 S7 Frequency 10 9 8 7 6 5 4 3 2 1 1 2 3 4 RVM MSB S5 1 2 3 4 7 8 824.9250 824.9375 824.9500 824.9625 824.9750 824.
8000 RECEIVER CHANNEL FREQUENCY CHART March 2000 Part No.
8900 RECEIVER CHANNEL FREQUENCY CHART APPENDIX B 8900 RECEIVER CHANNEL FREQUENCY CHART NOTE: ON = 1 OFF = 0 RDM LSB Receive Frequency MSB S2 10 9 8 7 6 5 4 3 2 1 LSB Channel Number 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 039 040 896.0125 896.0250 896.0375 896.0500 896.0625 896.0750 896.0875 896.1000 896.1125 896.1250 896.1375 896.1500 896.1625 896.1750 896.1875 896.2000 896.2125 896.
8900 RECEIVER CHANNEL FREQUENCY CHART Channel Number Receive Frequency NOTE: ON = 1, OFF = 0 LSB RDM MSB LSB S2 S6 S7 10 9 8 7 6 5 4 3 2 1 1 2 3 4 041 042 043 044 045 046 047 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 064 065 066 067 068 069 070 071 072 073 074 075 076 077 078 079 080 081 082 083 084 085 086 896.5125 896.5250 896.5375 896.5500 896.5625 896.5750 896.5875 896.6000 896.6125 896.6250 896.6375 896.6500 896.6625 896.6750 896.6875 896.7000 896.7125 896.7250 896.7375 896.
8900 RECEIVER CHANNEL FREQUENCY CHART Channel Number Receive Frequency NOTE: ON = 1, OFF = 0 LSB RDM MSB LSB S2 S6 S7 10 9 8 7 6 5 4 3 2 1 1 2 3 4 087 088 089 090 091 092 093 094 095 096 097 098 099 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 897.0875 897.1000 897.1125 897.1250 897.1375 897.1500 897.1625 897.1750 897.1875 897.2000 897.2125 897.2250 897.2375 897.2500 897.2625 897.2750 897.2875 897.3000 897.3125 897.
8900 RECEIVER CHANNEL FREQUENCY CHART Channel Number Receive Frequency NOTE: ON = 1, OFF = 0 LSB RDM MSB LSB S2 S6 S7 10 9 8 7 6 5 4 3 2 1 1 2 3 4 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 897.6625 897.6750 897.6875 897.7000 897.7125 897.7250 897.7375 897.7500 897.7625 897.7750 897.7875 897.8000 897.8125 897.8250 897.8375 897.8500 897.8625 897.8750 897.8875 897.
8900 RECEIVER CHANNEL FREQUENCY CHART Channel Number Receive Frequency NOTE: ON = 1, OFF = 0 LSB RDM MSB LSB S2 S6 S7 10 9 8 7 6 5 4 3 2 1 1 2 3 4 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 898.2375 898.2500 898.2625 898.2750 898.2875 898.3000 898.3125 898.3250 898.3375 898.3500 898.3625 898.3750 898.3875 898.4000 898.4125 898.4250 898.4375 898.4500 898.4625 898.
8900 RECEIVER CHANNEL FREQUENCY CHART Channel Number Receive Frequency NOTE: ON = 1, OFF = 0 LSB RDM MSB LSB S2 S6 S7 10 9 8 7 6 5 4 3 2 1 1 2 3 4 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 898.8125 898.8250 898.8375 898.8500 898.8625 898.8750 898.8875 898.9000 898.9125 898.9250 898.9375 898.9500 898.9625 898.9750 898.9875 899.0000 899.0125 899.0250 899.0375 899.
8900 RECEIVER CHANNEL FREQUENCY CHART Channel Number Receive Frequency NOTE: ON = 1, OFF = 0 LSB RDM MSB LSB S2 S6 S7 10 9 8 7 6 5 4 3 2 1 1 2 3 4 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 899.3875 899.4000 899.4125 899.4250 899.4375 899.4500 899.4625 899.4750 899.4875 899.5000 899.5125 899.5250 899.5375 899.5500 899.5625 899.5750 899.5875 899.6000 899.6125 899.
8900 RECEIVER CHANNEL FREQUENCY CHART Channel Number Receive Frequency NOTE: ON = 1, OFF = 0 LSB RDM MSB LSB S2 S6 S7 10 9 8 7 6 5 4 3 2 1 1 2 3 4 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 899.9625 899.9750 899.9875 900.0000 900.0125 900.0250 900.0375 900.0500 900.0625 900.0750 900.0875 900.1000 900.1125 900.1250 900.1375 900.1500 900.1625 900.1750 900.1875 900.
8900 RECEIVER CHANNEL FREQUENCY CHART Channel Number Receive Frequency NOTE: ON = 1, OFF = 0 LSB RDM MSB LSB S2 S6 S7 10 9 8 7 6 5 4 3 2 1 1 2 3 4 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 900.5375 900.5500 900.5625 900.5750 900.5875 900.6000 900.6125 900.6250 900.6375 900.6500 900.6625 900.6750 900.6875 900.7000 900.7125 900.7250 900.7375 900.7500 900.7625 900.7750 900.7875 900.8000 900.8125 900.
8900 RECEIVER CHANNEL FREQUENCY CHART March 2000 Part No.
2008 RECEIVER CHANNEL FREQUENCY CHART APPENDIX C 2008 RECEIVER CHANNEL FREQUENCY CHART Program Channel Number FCC Channel Number Repeater Transmit Frequency Repeater Receive Frequency Program Channel Number FCC Channel Number Repeater Transmit Frequency Repeater Receive Frequency 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 3
2008 RECEIVER CHANNEL FREQUENCY CHART Program Channel Number FCC Channel Number Repeater Transmit Frequency Repeater Receive Frequency 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 853.2125 853.2375 853.
2008 RECEIVER CHANNEL FREQUENCY CHART Program Channel Number 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 FCC Channel Number 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 Repeater Transmit Frequency 855.4375 855.4625 855.4875 855.5125 855.5375 855.
2008 RECEIVER CHANNEL FREQUENCY CHART Program Channel Number 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 FCC Channel Number 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 March 2000 Part No. 001-3139-502 Repeater Transmit Frequency 857.6125 857.
2008 RECEIVER CHANNEL FREQUENCY CHART Program Channel Number 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 FCC Channel Number 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 Repeater Transmit Frequency 859.7875 859.8125 859.
2008 RECEIVER CHANNEL FREQUENCY CHART Program Channel Number 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 FCC Channel Number 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 March 2000 Part No.
2008 RECEIVER CHANNEL FREQUENCY CHART Program Channel Number 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 FCC Channel Number 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 Repeater Transmit Frequency 864.3875 864.4125 864.
2008 RECEIVER CHANNEL FREQUENCY CHART Program Channel Number 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 FCC Channel Number 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 March 2000 Part No. 001-3139-502 Repeater Transmit Frequency 866.
2008 RECEIVER CHANNEL FREQUENCY CHART Program Channel Number 720 721 722 723 724 725 726 727 728 729 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 FCC Channel Number 714 715 716 717 718 719 720 721 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 Repeater Transmit Frequency 867.4875 867.5000 867.5125 867.5250 867.
2008 RECEIVER CHANNEL FREQUENCY CHART Program Channel Number 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 FCC Channel Number 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 - March 2000 Part No. 001-3139-502 Repeater Transmit Frequency 868.6500 868.6625 868.6750 868.6875 868.7000 868.7125 868.
2008 RECEIVER CHANNEL FREQUENCY CHART Program Channel Number 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 FCC Channel Number - Repeater Transmit Frequency 869.8000 869.8125 869.8250 869.8375 869.8500 869.8625 869.8750 869.8875 869.9000 869.9125 869.9250 869.9375 869.9500 869.9625 869.9750 869.9875 Repeater Receive Frequency 824.8000 824.8125 824.8250 824.8375 824.8500 824.8625 824.8750 824.8875 824.9000 824.9125 824.9250 824.9375 824.9500 824.9625 824.9750 824.
2008 RECEIVER CHANNEL FREQUENCY CHART March 2000 Part No.
2009 RECEIVER CHANNEL FREQUENCY CHART APPENDIX D 2009 RECEIVER CHANNEL FREQUENCY CHART Program Channel Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 FCC Channel Number Repeater Transmit Frequency Repeater Receive Frequency Program FCC Channel Channel Number Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 935.0125 935.0250 935.0375 935.
2009 RECEIVER CHANNEL FREQUENCY CHART Program FCC Channel Channel Number Number 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 March 2000 Part No.
2009 RECEIVER CHANNEL FREQUENCY CHART Program FCC Channel Channel Number Number 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 Repeater Transmit Frequency Repeater Receive
2009 RECEIVER CHANNEL FREQUENCY CHART Program FCC Channel Channel Number Number 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 March 2000 Part No.
2009 RECEIVER CHANNEL FREQUENCY CHART Program FCC Channel Channel Number Number 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 Repeater Transmit Frequency Repeater Receive Frequency 939.7125 939.7250 939.7375 939.7500 939.7625 939.7750 939.7875 939.8000 939.8125 939.8250 939.8375 939.8500 939.8625 939.8750 939.8875 939.9000 939.9125 939.9250 939.9375 939.9500 939.
2009 RECEIVER CHANNEL FREQUENCY CHART March 2000 Part No.
VOTER FAILURE ALARMS APPENDIX E VOTER FAILURE ALARMS ALARM DESCRIPTION 1. CRVMSTAT CRVMSTAT CRVMSTAT Chnl: 1 RVM: 0 FailVDM to Voter shelf link failed or whole voter shelf failed. Chnl: 2 RVM: 0 FailVDM to Voter shelf link failed or whole voter shelf failed. Chnl: 3 RVM: 0 FailVDM to Voter shelf link failed or whole voter shelf failed. 2. CRVMSTAT Chnl: 1 RVM: 0 FailCRVM failed. 3. CRVM Msg CRVM Msg Chnl: 1 failed CDMs: 1RDM failed. Chnl: 1 failed RDMs: 1RDM failed. 4.
VOTER FAILURE ALARMS March 2000 Part No.
