User Manual
OPERATION
● Before plugging in the cooler/warmer unit: make sure the switch on the back of the unit is set to the
OFF setting.
● A minimum 2" vent clearance is required for proper ventilation.
Plugging in your unit
● For home application:
Use the supplied AC power cord (see Fig. 2) by inserting AC connector into unit's AC port (see Fig. 6) and
inserting AC plug into wall outlet. This unit works on 100-240V (in compliance with North American and EU/UK
standards)
● For motor vehicle application:
Car engine MUST be turned on first before plugging in the cooler/warmer. This precaution prevents a power
surge that can lead to the unit overheating and/or becoming a potential fire risk. Use the supplied DC power
cord (see Fig. 3) and insert DC connector into unit's DC port (see Fig. 6) and the DC plug into the appropriate
cigarette-lighter outlet.
Turning on your unit
● For Cooling: Set the power switch to the COLD setting. A green light will turn on to indicate that the unit is in
cooling mode.
● For Warming: Set the power switch to the HOT setting. A red light will turn on to indicate that the unit is in
heating mode.
6










