Datasheet

65
HUMLOG20
v2.3 / Modification rights reserved
With SmartGraph3 the gathering of measured data is simple and as
intuitive as possible:
• An HUMLOG20 data logger is automatically recognized and added
as a “network device”.
• In addition to its data-readout function, the software possesses a
recording mode that enables parallel recording to be displayed on
the computer.
• The data from any desired number of HUMLOG20 devices can be
read out simultaneously.
• The zoom function allows for quick analyses of critical time periods.
• The exporting of measured data in csv format enables it to be
imported into EXCEL.
• The device configuration can be printed out in order to check instal-
lation parameters.
• Alarm limits - like the measured data - are chronologically managed
at various times so that when changes in alarm limits occur, they
can be retracted.
• Automatic data readout of all measured data is supported.
HUMLOG20 E Congurations Examples
Software SmartGraph3
The HUMLOG20 E is equipped with an digital input, which allows the connection of up to four external humidity/temperature
sensors.
Two additional analog inputs for sensors with voltage or current output, Pt100 temperature sensors in 3 and 4 wire technology
or Thermocouple J, K and S offers highest flexibility in the application.
Each fully equipped HUMLOG20 E is a 10 channel data logger that can record various data.
max. 150 m
Sensor 1
Sensor 2
Sensor 3
Sensor 4
2 x Analog input:
4...20mA
0...20mA
0...1V
Pt100 3-wire
Pt100 4-wire
Thermocouple K,J,S
Humidity/Temperature sensor LOGPROBE 20