Datasheet

EE381
v1.7 / Modification rights reserved
Ordering Guide
Accessories
Order Example
EE381-TEHA03D08/BL2-T05-X01
Model: transmitter Output 1: T
Pressure range: up to 20bar (290psi) Output 2: x
Pressure tight feedthrough: G1/2" male thread Output signal: 0-5V
Display: with display Temperature unit: °C
Scaling of T-output: 0...100°C
ppm Range: 0...100ppm
- Stainless steel grid (HA010110)
- Display (D08)
- Configuration software + interface cable (HA010604)
1) Input of oil specific parameters necessary
EE381-SEHA03/KK
Model: switch Relay 1: a
w
Pressure range: up to 20bar (290psi) Relay 2: a
w
Pressure tight feedthrough: G1/2" male thread Temperature unit: °C
Display: without display Setting of alarm output: standard
EE381- EE381-
Hardware Configuration
Model transmitter T
switch S
Pressure range up to 20bar
(290psi) E E
up to 100bar
(1450psi) I I
Pressure tight G1/2" male thread HA03 HA03
feedthrough 1/2” NPT thread HA07 HA07
Display without display
with display D08 D08
Software Configuration
select according to
Physical Temperature T [°C / °F] (B) output/relay 1 Orderin Guide (B,K,L,M)
parameters of Water activity a
w
[ ] (K)
outputs Water conten in mineral transformer oil x [ppm] (L) output/relay 2 select according to
Water content in lubrication or no mineral transformer oil
1)
x [ppm] (M) Ordering Guide (B,K,L,M)
Type of 0-1V 1
output signals 0-5V 2
(only for model T) 0-10V 3
0-20mA 5
4-20mA 6
Temperature unit °C
°F E01 E01
Scaling of T-ouput -40...60 (T02) -20...100 (T14) -40...140 (T83)
select according
(in °C oder °F) 0...50 (T04) 0...120 (T16) 0...250 (T88) output/relay T
to Ordering
0...100 (T05) 0...80 (T21) 32...120 (T90)
Guide (Txx)
-30...70 (T08) -20...80 (T24) 32...140 (T91)
other T-Scaling
-20...120 (T10) -40...160 (T33) 32...250 (T94)
refer to data sheet
-40...120 (T12) -40...250 (T81) 32...132 (T96)
„T-Scalings“
ppm Range x 0...100ppm (X01)
select according
to Ordering Guide
0...500ppm (X02) other measuring range: _______ output/relay x
0...1000ppm (X03)
Setting of alarm standard for connfiguration KK: R1: 0,8 [ ] R2: 0,9 [ ]
Schaltausgänge H1: 0,05 [ ] H2: 0,05 [ ]
other set points: relay 1: _____ relay 2: _______
SP
hysteresiss 1: ___ hysterresiss 2: _______
104