Datasheet

v1.6 / Modification rights reserved
EE371
Ordering Guide
Accessories
Order Example
EE371-TEHA07D08/CD2-Td/Tf03
Model: transmitter Output 1: Td
Pressure range: up to 20bar (290psi) Output 2: Tf
Pressure tight feedthrough: 1/2” NPT thread Output signal: 0-5V
Display: with display Measured value unit: metric
Scaling of output: -10...50°C
- sampling cell with quick connector (HA050102) - stainless steel sintered filter (HA010103)
- basic sampling cell ISO (HA050103) - display (D08)
- basic sampling cell NPT (HA050105)
- Product configuration adapter see data sheet EE-PCA
- product configuration software EE-PCS
(free download: www.epluse.com)
Basic Sampling Cell
The basic sampling cell offers the possibility to integrate the EE371 into an
existing or self-constructed sampling system.
Pressure range: 0...64 bar (0...928 psi)
Sampling Cell with Quick Connector
The sampling cell is specially developed for use in compressed air lines and has
a quick-connector suitable for standard compressed air connections.
It allows for the cell to be fitted and removed without interrupting the process.
The flow of gas can be adjusted using a bleed screw.
Pressure range: 0...10 bar (0...145 psi)
1
1
2
2
3
3
EE371- EE371-
Hardware Configuration
Model
transmitter T
switch S
Pressure range
up to 20bar E E
up to 100bar
(1450psi) I I
Pressure tight
feedthrough
G1/2" male thread HA03 HA03
1/2” NPT thread HA07 HA07
Display
without display
with display D08 D08
Software Configuration
Physical parameters
of the outputs/relays
dew point temperature Td [°C/°F] (C) output/relay 1 select accoriding to Ordering Guide(C,D,P)
frost point temperature Tf [°C/°F] (D) output/relay 2 select according to Ordering Guide(C,D,P)
volume concentration Wv [ppm] (P)
Type of
output signals
0-1V 1
0-5V 2
0-10V 3
0-20mA 5
4-20mA 6
Measured value units
for T / Td / Tf
metric/SI
non metric /US E01 E01
Scaling of Td/Tf-ouput
(in °C or °F)
-40...60 (Td/Tf02) -60...20 (Td/Tf65)
Other Td/Tf-scaling refer
select according to
-10...50 (Td/Tf03)
to data sheet „T-Scalings“
Ordering Guide (Tdxx / Tfxx)
ppm range Wv
0...100ppm (X01)
0...500ppm (X02) other measurment range: _______ select according to
0...1000ppm (X03) Ordering Guide
Setting of alarm
output
standard for configuration CC R1: -40 °C
(-40°F) R2: -35°C (-31°F)
H1: 2 °C (35.6°F) H2: 2°C (35.6°F)
other set points relay 1: _______ relay 2: ______
SP
hysteresis 1: ____ hysteresis 2: _____
1 = G 1/2“ ISO or 1/2“ NPT
2 = G 1/4“ ISO or 1/4“ NPT
3 = G 1/4“ ISO or 1/4“ NPT
1 = G 1/2“ ISO
2 = Bleed screw
3 = Quick connector
94