Datasheet

8
Accessories / Replacement Parts
(For further information, see data sheet "Accessories")
- Filter caps (HA0101xx) - Drip water protection (HA010503)
- Display + housing cover (D05M)
- Interface cable for PCB (HA010304) - Calibration set (HA0104xx)
- Interface cable for plug C06 (HA010311) - Pressure tight screw connections
- ½“ NPT-adapter for configuration (HA011101) 1/2” ISO ∅12mm (HA011102)
- Mounting flange 12mm (RH probe) (HA010201) 1/2” NPT ∅12mm (HA011103)
- Mounting flange 6mm (T probe) (HA010207) 1/2” ISO ∅6mm (HA011104)
- Adapter M16x1.5 to NPT ½" (HA011101) 1/2” NPT∅6mm (HA011105)
- RS485 Kit (HW + SW) for networking (HA010601) - Radiation shield for RH-probe (HA010502)
- Data logging / analysis software (HA010602) - Radiation shield for T-probe (HA010506)
Technical Data for Options
Connection Diagram
Working Range Humidity Sensor
The grey area shows the allowed measurement range for the
humidity sensor.
Operating points outside of this range do not lead to destruction
of the sensor, but the specified measurement accuracy cannot
be guaranteed.
Relative humidity [%RH]
Temperature [°C]
Display graphical LC display (128x32 pixels), with integrated push-buttons for selecting
parameters and MIN/MAX function
Alarm outputs 2 x 1 switch contact
250V AC / 6A
28V DC / 6A
threshold + hysteresis: can be adjusted with configuration software
switching parameters:
freely selectable between EE33-MFTA/C/D/E/I/J EE33-MFTK
RH Relative humidity 
T Temperature   
Td Dew point temperature  
 Tf Frost point temperature  
Tw Wet bulb temperature 
e Water vapour partial pressure 
r Mixture ratio 
dv Absolute humidity 
h Specific enthalpy 
Terminal configuration - Alarm output
(order code SW)
NO
NO
3
6
NC
NC
1
4
C
C
2
5
REL 1
REL 2
EE33