Datasheet

5
Networkability / Ethernet Interface
The optional RS485 interface (order code N) allows for building a
network of up to 32 transmitters.
The measurement data can be collected in a shared database and
made available for all kinds of further processing.
Additionally, the transmitters can be networked with an Ethernet
module
(order code E) for remote monitoring.
Integrated Display
The actual measurement data and the corresponding Min/Max values can be
indicated in an optional display
(order code D05). The physical quantity to be
displayed is selected by the push buttons next to the display.
Software
Configuration Software (included in the scope of supply):
The configuration software allows flexible and simple adjustment
of the analogue and alarm outputs in accordance with the
requirements. The adjustment / calibration of the humidity and
temperature outputs is possible as well. Furthermore the settings
of the start and duration of the heating of the measurement cell
can be defined.
Data Logging / Analysis Software (optional):
An additional software package enables data recording and
management, including alerts by e-mail or text message when set
points are triggered.
It is also possible to present the collected measurement data on a
PC in graphs or tables. If the option N (RS485) or E (Ethernet) is
selected in the ordering code, the data logging and analysis
software will be included in the scope of supply.
Functions
Comment
Measurement of humidity and temperature 
Calculation h, r, dv, Tw, Td, Tf, e 
2 freely scaleable and configurable analogue outputs 
Remote sensing probe up to 20m (65.6ft) 
On-site adjustment for relative humidity and temperature 
LED indication of transmitter status / error diagnosis of probes 
RS232 for transmitter configuration via PC 
Configuration software 
Alternating display with MIN/MAX indication optional
2 freely configurable alarm outputs optional
Removeable sensing probe optional
Sensor protection with coating optional 
Pluggable electrical connections optional
Data output via RS232 interface 
Data output via RS485 interface optional
Networking for up to 32 transmitters via RS485 bus optional  
Ethernet interface for networking and remote monitoring optional  
Data logging and analysis PC software optional
ARC-Module for external triggering of sensor-heating optional
EE33
Alarm Outputs
An optional alarm module with 2 relay outputs is available for control and alarm purposes (order code SW).
The selection of the physical quantity and the setting of threshold and hysteresis can be made with the
configuration software included in the scope of supply.