Data Sheet

24
www.epluse.com v1.3 / Modification rights reserved
HTE501
Orientation on the tape:
Figure 28: Orientation on the tape
6.17 Traceability
There are two possibilities for identification / traceability:
1. Read identification command (0x7029):
serial number of each individual sensor (see description of command 0x7029)
2. Laser marking:
A triangular mark at the top left indicates pin 1.
The upper line represents the designation of the component and consists of up
to 6 characters. The “x” is a placeholder for the exact type, e.g. 501.
The remaining characters are a tracking code and are used by the manufacturer
for identification.
Figure 29: HTEx laser marking
6.18 Ordering Information
TYPE TAPE AND REEL PACKAGING
HTE501 HTE501 2500 sensors TR2,5
Ordering example:
HTE501-TR2,5
Type: HTE501
Packaging: 2500 sensors