User's Manual

 3/4

1. Bluetooth mode: play the audio signal from Bluetooth device connected with the unit.

2. AUX mode: play the audio signal from the audio device with “AUX IN” port.

z Play the music

Play the audio signal from Bluetooth device

1. Follow the above connection steps to pair the Bluetooth device and the unit.

2. Enter in the Bluetooth device audio play menu, choose your favorite music to play.

3. Press the multi-function button to pause or play your music as you need.

AUX IN：

1. Plug one end of the supplied aux cable to the “AUX IN” port in the back of unit, and then plug the other end of the cable to audio

device.

2. Choose directly your favorite music in the audio device to play

3. Press the multi-function button to pause or play your music as you need.

z Adjusting the volume

Rotate the volume wheel on the unit or control the Bluetooth device volume directly to adjust the volume.

Technical parameters

Note: All specifications are subject to change without notice.

Product Name: Pureplay Pro Bluetooth speaker

Model Name：HT2011

Power Supply: DC 15V 2A

Output power: RMS 2 x 4W tweeter and 1 x 15W woofer

Bluetooth Profile Supported: A2DP, AVRCP

Working range: up to 8m

Maintenance

Please follow the instructions below before clear the unit

Power off the unit first before clear

Use a soft, dry, lint-free cloth to wipe gently

Do not use alcohol, benzene, thinners or other chemical detergents as these can cause the casing to be warped or discolored

Storage

If the unit will not be used for an extended period of time, unplug the power cord and place the unit with accessories into the

package.

Do not set the unit in a damp, high temperature or the sun point-blank place.

Troubleshooting

Question: Can’t pair successfully after multiple connections ？

Solution：

（1） Check the connection of power cable，and ensure the unit is powered on.

（2） Perhaps there are many Bluetooth devices around the surroundings to interfere the searching, please close the Bluetooth

function in the device you don’t need.

（3） Power off and then power on the unit, to restart the Bluetooth function on the unit or on your Bluetooth device.

（4） Unplug the AUX cable from the unit, and re-pair the unit and the Bluetooth device.

Question: The sound occurs staccato when play？

Solution：

（1） Make sure the working distance is in 8m.

（2） Clear away the block between the unit and the Bluetooth device to prevent the poor connecting.

Question: My unit has no sound when play？

Solution：

（1） Check the connection of power cable，and ensure the unit is powered on.