User's Manual
2/4
z Generous design for bedroom or house saloon decoration
z Aux in, work with any device with standard 3.5mm earphone jack
z Automatic connection, only one time pairing
Part Names
Main unit
Basic Operation
z Connecting the Power Cord and Power Adaptor
1. Plug the supplied power adapter into the wall outlet, and then, connect the DC end of power cord into the “DC IN” socket on the
unit.
z Power on/power off
1. Power on the unit: Press the power button on the unit, the red power indicator will light up.
2. Power off the unit:Hold the power button for 3 seconds to power off the unit, the red power indicator goes out.
z Connection
1. Work with phone
(1) Power on the unit, the Bluetooth function turns on automatically, a short Bluetooth hint sound comes out form the unit, ,
the blue Bluetooth indicator flashes at the same time, these show the unit is entering pairing mode.
(2) Turn on the Bluetooth function in your phone, search the Bluetooth device named “BiJELA HT2011”, select the device and
enter the password “0000”, the phone will remind you it has been paired successfully.
(3) After paired for the first time, your phone and the unit can auto-pair without enter the password, just chose the device
“BiJELA HT2011”in the list, and then your phone will connect the unit swiftly.
Note:Please take the User’s manual of your cell phone for the details about Bluetooth connection.
2. Work with tablet PC
Please refer to the above phone connection operation steps.
3. Work with laptop/ notebook computer /PC
As the Bluetooth version for laptop/ notebook computer /PC is various, the connection methods are different as well, if you can not
connect with the unit for play on the first use, you may need to install a new version of the Bluetooth driver in your laptop in advance.
Please reference the instructions of laptop for details.
z Play mode
Press the source switch to choose the play mode
1. Multi-function button (Power button & source switch)
2. Play/Pause button ( Built-in Bluetooth LED indicator)
3. Volume wheel
4. AUX IN
5. DC IN
6. Anti-slip pad