User's Manual
4/5
Model Name：HT1056
Power Supply: USB 5V
Battery capacity: 600mAh
Output power: 1.5W
Bluetooth Profile Supported: A2DP, AVRCP
Working range: up to 8-12m
Working atmosphere: 0℃-40℃/20%-90%RH
Maintenance
Please follow the instructions below before clear the unit
z Power off the unit first before clear
z Use a soft, dry, lint-free cloth to wipe gently
z Do not use alcohol, benzene, thinners or other chemical detergents as these can cause the casing to be warped or discolored
Storage
z If the unit will not be used for an extended period of time, power off the unit and place the unit with accessories into the package
z Do not set the unit in a damp, high temperature or the sun point-blank place
Troubleshooting
Question: Can’t pair successfully after multiple connections？
Solution：
（1） Check if the blue Bluetooth indicator lights on, if the indicator goes off, please slide the ON/OFF switch to “ON”, if the blue
Bluetooth indicator doesn’t light on yet, please charge the unit
（2） Perhaps there are many Bluetooth devices around the surroundings to interfere the searching, please close the Bluetooth
function in the device you don’t need
（3） Power off and then power on the unit, to restart the Bluetooth function of the unit or your Bluetooth device
（4） Unplug the AUX cable from the unit, and re-pair the unit and the Bluetooth device
Question: The sound occurs staccato when play？
Solution：
（1） Make sure the working distance is in 8-12m
（2） Clear away the block between the unit and the Bluetooth device to prevent the poor connecting
（3） Please check if the unit and the Bluetooth device is in low battery, if so, please charge the unit and your Bluetooth device
CE 2200
FCC STATEMENT
FCC ID:
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.