User's Manual

Prodcut Introduciton
1. Pr oduct f unct i on i nt r oduct i on as f ol l owi ng pi ct ur e:
Controller function sketch map
Receiver function sketch map
Use Introduction
1）. Open battery cover，put in 4pcs 1.5V AAA battery as
battery box polarity indication, then close it.
2）. Connect PSII console to TV, put in the game dish,
insert receiver.
3）. Draw the switch in controller (HP5139) front to “ON”
switch on，POWER LED bright，then switch on the
game console,”CONNECT” in receiver bright ；
If ”CONNECT” trun from winking to lasting,
connection for controller and receiver is ok, play is
ok；If “CONNECT” continue winking ， show that
connection of controller and receiver is off.
4 ） .Press”CONNECT” ， winking speed fast, then
press”CONNECT” in controller，until “CONNECT” in
receiver continue bright, conncetion of controller and
receiver is ok.
5）. When connection is ok, no work for 5 minutes，enter
to auto sleep model. Press ”CONNECT” in controller
for 3 seconds awake , POWER LED is on , get
right.
6）. When battery in low, POWER LED continue winking
remind of changing battery.
7）. Press any function button, then press”TURBO” to set
this button with TUTBO function；Press this button by
setting, then press”TURBO” to cancel TURBO
function；press”TURBO”, then press”START” select the
speed of TURBO, total 4 speed for selection, press
once for changing one speed.
8 ） .When controller beyond the receive distance,
the”CONNECT” in receiver continue winking, then
controller in this status without function or fucntion is
abnormal
9）.When connection of controller and receiver finish, then
play need notconnect by person, auto connect as