Welcome to the World of E-Collar Training Congratulations on your purchase of this E-Collar Pro Educator training system. We are confident that your e-collar training system will exceed your expectations. We have taken great care to provide ample safety features to assure pleasant experience for you and your dog. Finding best-suited training method with loving heart is essential for you and your dog. Soft leash pressure and low stimulation combined with consistent training techniques are more effective.
TABLE OF CONTENTS Preparing Device ~ POMPEIAN OHO + «+x sve ve nreasnnrassensaasensaaseeaaarnsaenaans Package Contents Device Composition How To Charge Devices -- MUTING ON/OFF the PE-B00 = How to Fit the Collar Comely rmrmmmemmmre ore ceca ee How to change the Contact Points -xxomeemeeneeneeen How to use Device LCD Display DESCRIPTION «+ «+x vu vue re Default Button Preset & Usage «= aes How 10 Find Proper Intensity LVI «+x x How to Program Stimulation Buttons Lock & Unlock Stimulation Level .
Important Notice Caution This product is not intended to be used on human beings. E-Collar Technologies, Inc. is not responsible for any misuse of this product including damages from dog bites and lost items. Seek evaluation by professional rainier before use for aggressive dogs. | is common for aggressive dags lo associate the stimulation with the handler and fake action against the handler.
PACKAGE CONTENTS # Ergonomic Transmitter # Waterproof Collar %* Owner's Manual Receiver + High Quality Bio thane Strap O i # Test Light # 5/8" and 3/4" Contact Points # Lanyard # Metal Belt Clip 7 900 Pro Educator
Device Composition Micro USB Charging Port 51828384 Programmable Stimulation Button P Button Programming made Hutton ON/OFF Button Tum Device ON/OFF Volume Dial Change Stimulation Level 5/8" Contact 5 Points Battery ON/OFF Charging Port |i Magnetic Dot 4 Battery Level Indicator and Tracking Light 900 Pro Educator
How to Charge Devices Important Notice : Take off the charger from when device is fully charged for longer battery life Transmitter : The battery life is displayed on the LCD. Receiver Indicator light is blinking “Green” when battery level is okay. Indicator light is “Amber” when battery level below medium. Indicator light is “Red” when battery is very low. Each Unit can be charged separately or together. Indicator light is red during charging and turn green when it is fully charged.
Turning ON/OFF the PE-900 Turing Receiver ON and OFF COLLAR RECEIVER tum ON/OFF by using magnet technology Put red dot on rear of Transmitter close to the red dot on the receiver. Turning Transmitter ON and OFF |= Press the “ON/OFF Button” for more than 1 second. Position of Transmitter To obtain the maximum range hold the transmitter like the torch on the Status of Liberty. Keep the antenna away from your body or fingers at all times, touching the antenna will greatly reduce the range.
CORRECTLY FITTING THE COLLAR Proper fit and position of the Receiver is important for better training efficiency The collar should be adjusted to allow the “contact points” to have direct contact with the skin. You should be able to fit a couple of fingers between the collar strap and your dog. Too tight poses the risk of skin imitation and discomfort. Too loose and the contact points will not be able to administer the stimulation reliably and can cause skin irritation due to chafing.
always seat the collar receiver by giving it a little wiggle to remove any hair that is between the contact points and the dog's skin. The optimal position for the collar receiver is on either side of the dog's windpipe in the the 7 to 10 o'clock position; most dogs don't like it on their windpipes. Periodically switching positions during a full day of e-collar use is good practice and can help prevent irritations from occurring.
LCD DISPLAY Description EE Momentary Stimulation Momentary Boost Stimulation Continuous Simulation Continuous Boost Simulation 1 Second Ramp Stimulation 2 Second Ramp Boosted Stimulation Instant Stimulation Mode Vibration v T Tore Boost Laval Effing Night Tracking Light Lost Transmitter Pairing Collar Receivers Send Single Stimulation in short duration Send boosted sing stimulation In short duration Sends stimulation continuously up o 10 seconds.
Default Button Preset & Usage Important Notice: Four default stimulation modes are ready to use when you receive the device. You can give these stimulation to dog by pressing button follow by the left diagram. Always start the Volume Dial from the low level. See LCD Display Description for how stimulation works and understand before use it for your dog. How to Find Proper Stimulation Level 900 Pro Educator supports 100 different stimulation levels.
Program Stimulation Buttons You can Program any stimulation mode and $4 Buttons. 1. Press and hold P button until Pf] is displayed. 2. Press any one of S1~84 button repeatedly until stimulation mode you want to set. 3. Stimulation mode will change as follow : [MrMmrCcrarRIREPIPVEIT 4. Repeat step program other button. 5. Press P any time to exit the Programming mode. How to Lock & Unlock Stimulation Level Lock the stimulation level to protect from unexpected high level stimulation. 1.
Instant Stimulation Instant Stimulation gives Stimulation continuously up to 45 seconds follows by Volume Dial. Volume Dial must be 0 to activate Instant Stimulation level. Caution: DO NOT FORGET YOUR DOG GETS STIMULATION EVERY SECOND UNTIL INSTANT STIMULATION TURN OFF 1. Set Instant Stimulation on any Stimulation Button. 2. Tum Volume Dial to 0 to activate (Require). You will see 18n 1 icon. 3. Press Stimulation Button at #1, Turn Volume Dial for starting stimulation.
Night Tracking Light Night Tracking Light provides bright light from the receiver. This feature provides bright vision around your dog and shows where your dog is heading to. This feature cannot be programmed on Stimulation Button 1.Press and hold P button until PR is displayed. 2 Press ON/OFF button two times, check [4] icon at LCD. 3.Press any one buttons to activate. 4 Receiver light will change OFF -> Blinking -> Solid, when you press 81 ~ 84 each time. 5.
Two Button Boost When you use 2 dog or 3 dog system, there is easier way to use Boosted stimulation. Instead of setting Boosted stimulation on stimulation button, you can do it with two button combination Important Nice: This feature only support for Momentary and Continuous 1. Press Stimulation Button dither Momentary or Continuous 2.
How to replace for new Receiver by Pairing 1. Make sure the Receiver is turned off. 2. Press and hole P button until PR is displayed. 3. Press ON/OFF button four times, check ee icon at LCD. 4. Put Transmitter’s red dot on Receiver's red dot for more than 5 seconds. 5. If Indicator Light on receiver rapidly blinking with green carol, press S1 to complete replacement. You will hear confirming sound. 6. Press P button to exit from the programming mode.
How to Add a Collar for Multi Dog System Default Stimulation buttons for Multi Dog System How to add extra receiver for second dog 1. Make sure the Receiver is turned off. 2. Press ON/OFF button four times, check icon at LCD. 3. Press and hole P button until PR is displayed. 4. Put Transmitter’s red dot on Receivers red dot for more than 5 seconds. 5. If Indicator Light on receiver rapidly blinking with green color, press 84 to complete replacement. You will hear confirming sound. 6.
Important Training Tip E-Collars should be used to reinforce commands your dog already knows. It is not a replacement for basic leash obedience training, but a tool to allow you to better communicate to your dog. For best results, use the least amount of stimulation required to get compliance from your dog. A calm and consistent approach to training will always produce better long term results.
Troubleshooting =. My Receiver / Transmitter is not turning on i Make sure the: Receiver has been charged. We recommend device fully charge before use. {1 Check Receiver's indicator light is blinking green and Transmitter LCD to check device power. 1 Check Receivers indicator light is:red when you press any stimulation button.
WARRANTY AND REGISTRATION To register your Pro Educator please select one of the following procedures {1) Go to the “Products” section on www.ecollar.com and click the “Register Your e-Collar Products” tab and complete the form {2) Fill out the provided warranty registration card and mail it or fax 1-855-226-5527. {3) Call us at (260) 357-0051 and one of our customer service representatives will register your products for you, please have your serial number available.
Safety and General Information The PE-900 Series Collar complies with all National and International Standards and Guidelines for human exposure to radio frequency electromagnetic energy. Nearly all electronic devices are susceptible to electromagnetic interference) if inadequately shielded or designed without precautions to EMI. PE-900 Series e-collar transmitters manufactured by E-Collar Technologies, Inc. comply with Article 15 of the FCC rules and operate under Part 95 of FCC regulations.
E-Collar Technologies, Inc. This product is covered by various patents including but not limited to patents 8757098 and 8833309. Patent is pending on the Instant Stimulation Feature on this device. 2120 Forrest Park Drive Garrett, IN 46738-1887 1-260-357-0051 (US & International} 1-855-326-5527 (US Toll Free) 1-855-226-5627 (US Toll Free Fax) sales @collar com www.ecollar.com Patents Pending © 2014 E-Collar Technologies, Inc.