Users Manual

* Setting stimulation level Increasing step
- You can increase the stimulation level by using the -Button (The default
setting is "5" <increase level value by 5>, and can be set to "1" or "10"..)
- Setting Procedure
1. Enters mode.
2. To select Stimulation Mode for Dog1, press (Black)-Button until
LCD shows . To select Stimulation Mode for Dog2,
press (Red)-Button until LCD shows in mode.
3. Press the -button to display the desired setting among "1+", "5+" and "10+".
4. Press the -button to save changes and exit program mode.
1D
+
2D
+
Increasing Level Operation LCD Display
1 Step
Until LCD shows desired step as "1 +",
repeat pressing -Button.
10 Steps
Until LCD shows desired step as "10 +",
repeat pressing -Button.
5 Steps
Until LCD shows desired step as "5 +",
repeat pressing -Button.
1D
+
1D
+
2D
+
(Dog1 mode)
(Dog2 mode)
2D
+
(Dog1 mode)
(Dog2 mode)
(Dog1 mode)
(Dog2 mode)
562A PROGRAMMING MODE
37
1D
2D
* Regardless of the setting of the level increasing step, level decreasing
step when press -Button is fixed by 1 step.
FE-560A/562A Owner’s Manual