Users Manual

MODE Setting Value LCD Display

562A PROGRAMMING MODE

Sets the operation function of the

(Red)-button (Dog2).

(StimulationൺRising Stimulationൺ

ToneൺLOW Vibration ൺ

HIGH Vibration)

Select the mode by pressing

(Red)-Button

2D T

* If the maximum level limit is set in , it will not go above the set value

when raising the stimulation level with the -button.

* -button stimulation level increase value setting

- You can increase the stimulation level by using the -button.

(The default setting is "5" <increase level value by 5>, and can be set

to "1" or "10"..)

- Setting method

1. DOG1 setting

1-1. Enter " " in program mode.

1-2. Press the (Black)-button to select the " " icon.

1-3. Press the -button to display the desired setting among "1+",

"5+" and "10+".

1-4. Press the -button to save changes and exit program mode.

FE-560A/562A Owner’s Manual