Users Manual
MODE Setting Value LCD Display
- In the program mode, the setting of 1D (DOG1) can be selected by
pressing the (Black)-button, and the setting of 2D(DOG2) can be
selected by pressing the (Red)-button.
- After setting the function of each button, press the -button to save the
changes and exit the program mode.
562A PROGRAMMING MODE
34
FE-560A/562A Owner’s Manual
1D
The maximum level limit of the DOG1
stimulation can be set.
(Settable level : 5 ~ HI)
* Select 1D(DOG1) with (black)-button.
* Set the level value with , -button.
Sets the operation function of the
(Black)-button (Dog1).
(StimulationൺRising Stimulationൺ
ToneൺLOW Vibrationൺ
HIGH Vibration)
Select the mode by pressing
(Black)-Button
The maximum level limit of the
DOG2 stimulation can be set.
(Settable level : 5 ~ HI)
* Select 2D(DOG2) with (Red)-button.
* Set the level value with , -button.
2D
1D
1D
+
1D
T
1D
V
1D
v