Users Manual

* If the maximum level limit is set in , it will not go above the set value
when raising the stimulation level with the -button.
560A PROGRAMMING MODE
21
* Setting stimulation level Increasing step
- You can increase the stimulation level by using the -button.
(The default setting is "5" <increase level value by 5>, and can be set
to "1" or "10"..)
- Setting Procedure
1. Enter " " in program mode.
2. Press the (Black)-button to select the " " icon.
3. Press the -button to display the desired setting among "1+", "5+" and "10+".
4. Press the -button to save changes and exit program mode.
1D
Increasing
Step
Operation LCD Display
1D
++
1 Step
1D
++
5 Step
1D
++
10 Step
Until LCD shows desired step as "1 +",
repeat pressing -Button.
Until LCD shows desired step as "5 +",
repeat pressing -Button.
Until LCD shows desired step as "10 +",
repeat pressing -Button.
* Regardless of the setting of the level increasing step, level decreasing
step when press -Button is fixed by 1 step.
FE-560A/562A Owner’s Manual