Data Sheet
PROJECT 3
PROJECT 4
Copyright © 2018 E-Blox
®
, Inc. All rights reserved. Patent 6,805,605 and other patents pending.
OTHER CIRCUIT BLOX
®
PRODUCTS
Spin the Fan
Build the circuit shown on the right, place the fan blade (60)
on the motor (95), turn on the switch (62) by pressing it down,
and the motor (95) will start spinning. Turn off the switch (62)
by pressing it down and the motor (95) will stop spinning.
Note: Make sure the motor (95) is in the same direction
shown in the circuit diagram (note the orientation of the
black lines printed on the motor). In this orientation the
fan (60) will spin clockwise, which causes a downward
force on the fan blade and thus the fan (60) will NOT
launch in this project (see next project).
Launch the Flying Saucer
Build the circuit shown on the right, place the fan blade (60) on
the motor (95), turn on the switch (62) by pressing it down, and
the motor (95) will start spinning. To launch the fan you may
need to turn off the switch (62) by pressing down on the button
or give the fan a tap from underneath with your ngernail.
Note: Make sure the motor (95) is in the same direction
shown in the circuit diagram (note the orientation of the
black lines printed on the motor). In this orientation the
fan (60) will spin counter-clockwise, which causes an
upward force on the fan blade that makes the fan (60)
launch. Also remove the motor shaft cap if it was installed
previously as it will prevent the fan (60) from launching.
72 Projects
35 pieces, including a maze, hand
crank generator, LEDs, and more!
395 Projects
66 pieces, including LEDs, resistors,
capacitors, transistors, and more!
Lights
32 pieces, including 25 transparent
spacer blox.
120 Projects
49 pieces, including a sound module,
FM radio module, speaker, and more!
800 Projects
78 pieces, including an inductor coil,
magnet spinner, transistors, and more!
Lights Deluxe
147 pieces, including 24 LED blox
and USB port.
Lights Plus
19 pieces, including 12 LED blox and
USB port.
115 Projects
40 pieces, including a motor, fan,
sound module, speaker, and more!
REV-A