Data Sheet

-62-

st level

1st level

2nd level

114. Touch-controlled Slow Flashing LED

Press the switch (62), the LED (70) will ash slowly. Press the press switch (61) and the LED (70)

will go off. Touch the touch plate (80) and the LED (70) will ash slowly again. You may need to lick

your ngers to make the touch plate (80) function properly.

115. Magnet-controlled Slow Flashing LED

Replace the press switch (61) with the reed switch (83), then press the switch (62), the LED (70) will ash slowly.

Move the magnet (7) towards the reed switch (83), the LED (70) will ash slowly too. When you move the magnet

(7) away the LED (70) will turn off. Put the magnet (7) on the reed switch (83), the LED (70) will ash slowly again.

113. Press Switch-controlled

Slow Flashing LED

Press the switch (62), the LED (70)

will ash slowly. Press the press

switch (61) and the LED (70) will turn

off. Now hold the press switch (61)

and the LED (70) will ash slowly

again.

112. Slow Flashing LED

Build the circuit, press the switch

(62), the LED (70) will ash slowly.

EBX120_Manual_042817 5/17/2017 10:54 AM Page 63