Data Sheet

-61-
110. Touch-controlled Flashing LED (Varying Speed and Brightness)
Press the switch (62), the LED (70) will ash slowly. Press the touch plate (80), the ashing speed
and brightness of the LED (70) will be changed. You may need to lick your ngers to make the touch
plate (80) function properly.
111. Magnet-controlled Flashing LED (Varying Speed and Brightness)
Replace the press switch (61) with the reed switch (83), press the switch (62), the LED (70) will
ash slowly. Move the magnet (7) towards the reed switch (83) several times, the ashing speed
and brightness of the LED (70) will be changed.
1st level
109. Press Switch-controlled
Flashing LED (Varying
Speed and Brightness)
Build the circuit, press the switch (62),
the LED (70) will ash slowly. Press the
press switch (61), the ashing speed
and brightness of the LED (70) will
change.
2nd level
1st level
EBX120_Manual_042817 5/17/2017 10:54 AM Page 62