Data Sheet

-60-
1
st level
1st level
2nd level
107. Touch-controlled Flashing LED
Press the switch (62), the LED (70) will ash steadily. Press the touch plate (80) and the LED (70)
will turn off. Hold the touch plate (80) and the LED (70) will ash quickly. You may need to lick your
ngers to make the touch plate (80) function properly.
108. Magnet-controlled Flashing LED
Replace the press switch (61) with the reed switch (83), press the switch (62), the LED (70) will ash
slowly in its maximum brightness. Put the magnet (7) on the reed switch (83) and LED (70) will ash quickly.
105. Steady Flashing LED
Build the circuit, press the switch
(62) and the LED (70) will ash
steadily.
106. Press Switch-controlled
Flashing LED
Press the switch (62), the LED (70)
will ash steadily. Press the touch
plate (80) and the LED (70) will go
off. Press the press switch (61) and
the LED (70) will come back on.
EBX120_Manual_042817 5/17/2017 10:54 AM Page 61