Data Sheet

-59-

103. Touch-controlled Slow Flashing Lamp

Press the switch (62), the lamp (76) will ash slowly. Press the press switch (61) and the lamp

(76) will go off. Touch the touch plate (80) and the lamp (76) will ash slowly again. You may need

to lick your ngers to make the touch plate (80) function properly.

104. Magnet-controlled Slow Flashing Lamp

Replace the press switch (61) with the reed switch (83), press the switch (62), the lamp (76) will ash slowly. Move the

magnet (7) towards the reed switch (83), the lamp (76) will turn off. Now put the magnet (7) on the reed switch (83)

and do not move it. The lamp (76) will ash slowly, when you move the magnet (7) away, the lamp (76) will turn off.

1st level

102. Press Switch-controlled

Slow Flashing Lamp

Press the switch (62), the lamp (76) will

ash slowly. Press the press switch (61)

and the lamp (76) will turn off. Now hold

the press switch (61) and the lamp (76)

will ash slowly again.

2nd level

st level

101. Slow Flashing Lamp

Build the circuit, press the

switch (62), the lamp (76) will

slowly ash.

EBX120_Manual_042817 5/17/2017 10:54 AM Page 60