Data Sheet

-58-
99. Touch-controlled Flashing Lamp (Varied Speed)
Press the switch (62), the lamp (76) will ash slowly. Touch the touch plate (80) several times, the ashing speed
of the lamp (76) will change. You may need to lick your ngers to make the tTouch plate (80) function properly.
100. Magnet-controlled Flashing Lamp (Varied Speed)
Replace the press switch (61) with the reed switch (83), press the switch (62), the lamp (76) will
ash slowly. Then move the magnet (7) towards the reed switch (83) several times, the ashing
speed of the lamp (76) will change.
1st level
98. Press Switch-
controlled Flashing Lamp
(Varied Speed)
Build the circuit, press the switch
(62), the lamp (76) will ash slowly.
Then press the press switch (61)
and the ashing speed of the lamp
(76) will change.
1st level
2nd level
EBX120_Manual_042817 5/17/2017 10:54 AM Page 59