Data Sheet

-33-
37. Triple Switch Series-Parallel Connection (I) controlling Lamp
In the circuit, the lamp (76) cannot turn on by just pressing the switch (62). If you press
the switch (62) and press and hold the press switch (61), then the lamp (76) will light
up. Or if you press the switch (62) and move the magnet (7) towards the reed switch
(83), then the lamp (76) will light up. If you want to turn off the lamp (76) you should
release the press switch (61) and move the magnet away from the reed switch (83). Or
you can just turn off the main switch (62).
EBX120_Manual_042817 5/17/2017 10:54 AM Page 34