Data Sheet

-22-
14. Switch-controlled Lamp &
Motor Parallel Connection
Put on the fan blade (60), press the
switch (62), the fan will start spinning,
the lamp (76) will be on as well. Press
the switch (62) again, the fan will
stop, the lamp (76) will also turn off.
12. Switch-controlled Lamp and Motor
Series Connection
First put on the fan blade (60), then press
and hold the switch (62), the fan will start
working and the lamp (76) turns on at the
same time. Press the switch (62) again, the
fan will stop and the lamp (76) will turn off.
13. Press Switch-controlled Lamp and
Motor Series Connection
Replace the switch (62) with the press switch (61),
put on the fan blade (60), then press and hold the
press switch (61), the fan will start spinning and the
lamp (76) will turn on too. Release the press switch
(61), the fan will stop and the lamp (76) will turn off.
2nd level
2nd level1st level
!
WARNING: Moving parts. Do not
touch the fan or motor during
operation. Do not lean over the motor.
EBX120_Manual_042817 5/17/2017 10:54 AM Page 23