Data Sheet

-21-
9. Press Switch-controlled Flying Saucer
First, take off the cap (59) that is on the fan blade (60). Build the circuit, then hold the press switch
(61) until the motor (95) runs fast, then release the press switch (61) and you will see the ying
saucer take off. (Caution! Never let it y near your face!)
10. Switch-controlled Flying Saucer
Replace the press switch (61) with the switch (62), put on the fan blade (60), then press the switch
(62). Wait for the motor (95) to run fast. Press the switch (62) again, the ying saucer will take off.
11. Magnet-controlled Flying Saucer
Replace the press switch (61) with the reed switch (83), move the magnet
(7) towards the reed switch (83). Wait for the motor (95) to start running.
Move the magnet (7) away, then the ying saucer will take off.
Reminder: Remove
the shaft cap before
using the ying
saucer.
2nd level
!
WARNING: Moving parts.
Do not touch the fan or
motor during operation. Do
not lean over the motor.
EBX120_Manual_042817 5/17/2017 10:54 AM Page 22