Data Sheet

-19-
5. Press Switch-controlled Lamp
Press and hold the press switch (61), the lamp
(76) will turn on. Release the press switch
(61), the lamp (76) will turn off. Replace the
lamp (76) with the LED (70), making sure the
LED is in the correct direction, hold the press
switch (61); LED (70) lights up. Release the
press switch (61), LED (70) will turn off.
6. Switch-controlled Fan
Assemble the fan by following the assembly
diagram below. Then press the switch (62);
the fan will start spinning.
!
WARNING: Moving parts. Do not
touch the fan or motor during
operation. Do not lean over the motor.
Fan Assembly
Motor shaft cap
Fan
Motor top
Motor
EBX120_Manual_042817 5/17/2017 10:54 AM Page 20