Manual

-18-
5. Press Switch-controlled Lamp
Build the circuit, press the press switch (61), the
lamp (76) will ash. Hold the press switch (61), the
lamp (76) will stay on. This circuit acts like a push
button ash light.
6. Alarm Switches
Build the circuit, making sure the LED (69) is in
the correct direction. Move the magnet (7) towards
the reed switch (83) and the LED (69) will turn ON.
Move the magnet (7) away and the LED (69) will turn
OFF. House alarms sometimes use reed switches to
detect when a door or window is open.