Manual

-16-
1. Closed Circuit
E-Blox
®
Circuit Blox™ uses electronic blocks that plug
into a clear plastic grid to build different circuits.
These blocks have different colors and numbers on
them so that you can easily identify them.
Build the circuit shown on the left by placing all
the parts that plug into the rst layer base. Then,
assemble the parts that connect to the secondary
layer. Install three (3) “AA” batteries (not included)
into the battery holder (91). Secure the battery
cover before using it.
Pressing the switch (62) creates a closed circuit;
the lamp (76) will turn ON. Press it again to open
the circuit and the lamp (76) will turn OFF.
2. The ‘Momentary’ Switch
Build the circuit, press and hold the press switch
(61) and the LED (69) will turn ON. Release the
press switch (61) and the LED (69) will turn OFF.
This type of switch is called a ‘momentary’ switch
since it is only ON when pressed.