Specifications

Option 201. IF Filter Package #1. 8-pole 400Hz CW filters for the 9MHz and 455KHz
IF's in the Sienna. Highly recommended for CW operation. These are Inrad 759 and 703
crystal filters on snap-in Yaesu FT-1000MP style "C" boards.
Fully assembled, 1 lb.……………..….……………………….………………..$295.00
Option 202. IF Filter package #2. 8-pole 250Hz filter for the 455KHz IF. It is mounted
on a Yaesu FT-1000MP style "C" board. Fully assembled, 1 lb.…………...…$170.00
Option 203. IF Filter package #3. 9.0015MHz and 455KHz 8-pole 1.8 kHz SSB filters
mounted on Yaesu FT-1000MP style "C" boards. Fully assembled, 1 lb….…..$295.00
Option 204. Upgrades standard 20KHz ceramic filter to 5.8KHz Collins mechanical
filter (455KHz IF). Fully assembled, 1 lb..…….…….……...…………..…….$120.00
Option 205. 9.0015MHz 10-pole 2.4 kHz SSB filter mounted on Yaesu FT-1000MP
style "C" board. Use in place of standard 4-pole filter for better selectivity. Can also be
installed with standard filter, but occupies a filter slot that you may wish to use for other
filters. Fully assembled, 1 lb….………………..……………………………....$140.00
If ordered as an upgrade to the stock 4-pole filter (Opt. 205U)...…...…….…$115.00
Option 207. 9.0000MHz 8-pole 6 kHz AM filter. Required for AM modes. (You can
listen to AM using an SSB filter by zero-beating the carrier, but this filter gives a more
natural sound to AM broadcasts.)
Fully assembled, 1 lb……………………………………..……….…………....$130.00
Note: Sienna now includes a high-performance 5kHz roofing filter at 70.455MHz
standard.
Option 103. Front Panel. This kit consists of two precision, "velvet-touch" rotary pulse generators (for the tuning controls),
two analog meters (one for transmit functions, one for receive), vacuum fluorescent graphics display, lighted pushbuttons
with a positive tactile sensation (not "squishy"), pots, mic/headphone/key jacks, PC board, cables, knobs, steel sub-panel and
polycarbonate overlay. To add this to an existing Sienna model, you build the simple front panel board and attach it to the
new sheet metal sub-panel along with the meters and vacuum fluorescent display. You then remove the controller board from
the existing blank front panel and snap it onto the new assembly. Entire assembly procedure takes about 5 hours. (Included
in all transceiver models.) Kit, 2 lb…………………….…………………………………………..…………………...$700.00
Choose one of three styles of
overlay—burgundy/yellow/gray
with color wheels around knobs,
gray on gray with minimal
color, or gray on black with no
two-tone group highlights.
Available with green, red, yel-
low and/or blue LEDs and
white/colored, white/clear or
gray/frosted key caps. (Blue
LEDs available only with white/
clear or gray/frosted keycaps.)
Inrad (www.inrad.net) offers many other filters for Sienna. You can order them directly from Inrad, or we’ll be happy to get
them for you. If you order from our web site (www.valleyhamshack.com), a complete selection is shown in addition to those
described above. Also please visit our web page specifically dealing with filter selection at www.dzkit.com/filters.htm.