Specifications

Add a panadapter or secondary receiver to your Sienna.
Made by RFSpace, the SDR-IQ is a software defined radio (SDR) receiver that connects to the 455kHz IF Output jack on Sienna’s back panel.
or to a separate receive antenna. Connect the USB cable to your PC, select SIENNA from the list of supported radios, and you’ll be able to
monitor up to 190kHz of spectrum around your operating frequency. As you change frequency, the SDR-IQ keeps up with you, and if you click
on a signal of interest, the SDR-IQ will re-program Sienna to go to that frequency. This product fits inside our “Sedona” enclosure.
You can view the spectrum either as a traditional spectrum analyzer, or as a horizontal or vertical “waterfall”.
DZKit does not sell the SDR-IQ. It must be purchased through other retailers. It typically sells for about $500.