User Manual

10
1 2 3
10
Direct drive cleaner head: Clearing obstructions
Mini motorized tool: Clearing obstructions
EN
Using your Dyson appliance
Please read the ‘Important Safety Instructions’ in this Dyson Operating Manual
before proceeding.
Docking station installation
• Use appropriate mounting hardware for your wall type and ensure that the docking
station is mounted securely. Ensure no pipe work (gas, water, air) or electrical
cables, wires or ductwork are located directly behind the mounting area. Dyson
recommends the use of protective clothing, eyeware and materials when installing the
docking station.
Operation
• Do not use outdoors or on wet surfaces or to vacuum water or other liquids –
electric shock could occur.
• Ensure the appliance remains upright in use. Dirt and debris may be released if it is
turned upside down.
• Do not operate while checking for blockages as doing so may result in personal injury.
• For domestic indoor and car use only. Do not use it while the car is in motion or
while driving.
• To operate the Max mode, locate the switch on the top of the appliance. Slide the switch
to the Max mode position.
• To switch off Max mode, slide the switch back to the Powerful suction mode position.
• This appliance has carbon fibre brushes. Take care if coming into contact with them, as
they may cause minor skin irritation. Wash your hands after handling the brushes.
Carpets or hard floors
• Before vacuuming your flooring, rugs and carpets, check the manufacturer's
recommended cleaning instructions.
• The brush bar on the appliance can damage certain carpet types and floors.
Some carpets will fuzz if a rotating brush bar is used when vacuuming. If this happens,
we recommend vacuuming without the motorized floor tool and consulting with your
flooring manufacturer.
• Before vacuuming highly polished floors, such as wood or linoleum, first check that
the underside of the floor tool and its brushes are free from foreign objects that could
cause marking.
Vacuuming
• Do not use without the clear bin and filters in place.
• Fine dirt such as flour should only be vacuumed in very small amounts.
• Do not use the appliance to pick up sharp hard objects, small toys, pins, paper clips,
etc. They may damage the appliance.
• When vacuuming, certain carpets may generate small static charges in the clear
bin or wand. These are harmless and are not associated with the electricity supply.
To minimize any effect from this, do not put your hand or insert any object into the clear
bin unless you have first emptied it. Clean the clear bin with a damp cloth only. (See
‘Cleaning the clear bin’.)
• Use extra care when cleaning on stairs.
• Do not rest the appliance on chairs, tables, etc.
• Do not press down on the nozzle with excessive force when using the appliance as this
may cause damage.
• Do not leave the cleaner head in one place on delicate floors.
• On waxed floors the movement of the cleaner head may create an uneven lustre. If this
happens, wipe with a damp cloth, polish the area with wax, and wait for it to dry.
Diagnostics – Lights during charging
Diagnostics – During use
Emptying the clear bin
• Empty as soon as the dirt reaches the level of the MAX mark – do not overfill.
• Ensure that the appliance is disconnected from the charger before emptying the clear
bin. Be careful not to pull the ‘ON’ trigger.
• To make emptying the clear bin easier, it is advisable to remove the wand and floor tool.
• To minimize dust/allergen contact when emptying, encase the clear bin tightly in a dust
proof bag and empty.
• To release the dirt, hold the appliance by the handle, pull the red lever back and lift
upwards to release the cyclone. Continue until the bin base automatically opens and
releases the dirt.
• Remove the clear bin carefully from the bag.
• Seal the bag tightly, dispose as normal.
• To close, push the cyclone downwards until it is in the normal position and manually
close the base of the bin – the base will click when it is securely in place.
Flashing red: Fault (contact the Dyson Helpline).
Solid amber: Fault - if this persists contact the
Dyson Helpline.
Solid blue: ‘ON’.
Flashing blue: No power, charge battery.
Flashing amber: No power, temporary fault
(e.g. too hot/cold).
Flashing red: Fault (contact the Dyson Helpline).
Solid blue: Charging.
Lights off: Charging complete.
Flashing blue: Not charging – refit charger or try another
socket. If this persists, contact the Dyson Helpline.
Solid amber: Not charging, temporary fault
(e.g. too hot/cold).
Tête de nettoyage à entraînement direct : Élimination des obstructions
Mini-brosse à moteur : Élimination des obstructions