Operation Manual

Coin trap

Maintenance

5 Remove any objects from the coin trap.

6 If any more items seem to be blocking the coin trap,

pull out the flow accelerator.

• Remove any items and firmly push the flow accelerator back

into place.

To replace the coin trap cover:

• Ensuring the seal is in place, lubricate with a drop of washing

up liquid.

• Fit the cover with the plug at the top.

• Turn 1

turns clockwise, ensuring the childproof tab ‘clicks’

back into place.

• Make sure the plug is pushed back into the closed position.

10 02

Never remove any objects from the coin trap while the

washing machine is switched on, still running or paused

during a wash. Always allow the water to cool before

opening the coin trap.

• Empty the coin trap when a blockage has occurred.

1 Place a tray or shallow dish underneath the coin trap.

2 Using the Dyson spanner, lever the plug in the middle of the

coin trap. The water will drain from the plug.

3 If the tray or dish is full, push the plug into its original position

by hand, empty the tray or dish and repeat the process.

4 Once the water has been removed (a small quantity of water

will remain below the level of the plug), lift the childproof tab

using the Dyson spanner. Then turn the window anticlockwise

until it is released.

Childproof tab

Coin trap window

Flow accelerator

Plug

Side view: lever hand and spanner 45