Operation Manual

Cleaning
Maintenance
• The soap tray cavity in the machine should be cleaned out
with a small, soft brush, taking care not to dislodge the
rubber seal.
• Replace the soap tray ensuring it ‘clicks’ into place.
Do not:
• wash the soap tray in a dishwasher.
Maintenance wash
To prevent odours and build-up of deposits within the
washing machine, it is recommended that you run an empty
85ºC cotton cycle with a half measure of detergent 2 or 3
times a year.
If the outer door is dislodged from its safety hinge:
1 Locate the top ring of the outer door into the yellow part of
the flexible safety hinge.
2 Lift the door and push it forward until the lower ring of the
door ‘clicks’ into place.
The outer door is designed to ‘pop’ out of its hinge if leant
on, however it is not designed to support a load.
10 01
Always:
• disconnect the machine from the mains before cleaning or
carrying out any maintenance work.
Do not:
• clean the machine with cleaning solutions. Always use a
clean, soft, damp cloth.
Cleaning the soap tray
• Remove the soap tray by pressing the yellow release button at
the back of the tray, and pulling it out.
• Wash it in warm, soapy water with a small, soft brush, taking
care not to scratch the soap tray front.