User guide

Check tools, wand and hose are
clear of blockages.
A To remove the hose, rotate
base of hose downwards until
it clicks, then twist away from
the machine.
B Squeeze release catches to
remove the airway inspection
and check inside.
C Pull the top end of the tube
away from machine and
check inside.
D Undo coloured soleplate
fasteners with a coin.
E Rotate endcaps to remove.
F Pull out brushbar sections.
G Cut out debris avoiding bristles.
8 Clearing blockages
IMPORTANT
• If any part of the machine
becomes blocked, it may
overheat and then automatically
shut off
. Unplug machine and
leave to cool down.
• For safety, please lay the
machine on its side before
checking for blockages.
• Refit all parts of the machine
securely before using it.
• Beware of sharp objects when
clearing blockages.
A
G
F
D
B
C
A
C
B
Maintaining mini turbine head*
(Supplied with certain models or
available as an accessory).
A Undo fasteners and remove
soleplate.
B Remove brushbars and
debris. When re-assembling,
ensure brushbar arrows
match those on central
support C.
*Selected models only.
E